虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

single

单精度浮点型(float),在C++中,单精度浮点型(float)专指占用32位存储空间的单精度(single-precision)值。单精度在一些处理器上比双精度更快而且只占用双精度一半的空间,但是当值很大或很小的时候,它将变得不精确。当你需要小数部分并且对精度的要求不高时,单精度浮点型的变量是有用的。例如,当表示美元和分时,单精度浮点型是有用的。在foxpro中,单精度浮点型是为了提供兼容性,浮点数据类型在功能上等价于数值型。
  • 基于C8051F020单片机的多路压力测量仪

    介绍了一种基于C8051F020单片机的多路压力测量仪。该测量仪选用电阻应变式压力传感器采集压力信号,并经放大电路处理后送入C8051F020单片机,再由C8051F020单片机内部的A/D转换器将采集到的压力信号进行模数转化,然后分别对数据进行存储和显示。该测量仪能测量6路压力信号,并且各测量点都能单独检测和设置。由于采用了C8051F020单片机,简化了硬件电路,增强了抗干扰能力,使得测量仪具有测量精度高,冲击小等特点。 Abstract:  A measurement apparatus for multi-channel pressure based on single chip microcomputer is introduced.It can measure 6 channels signal of the pressure,and the pressure measure points can be detection and located individually.The pressure signal sampling is obtained by resistor stress-type pressure sensors,the digital signals of 6 channels are collected through amplifying and adjustment circuit of pressure signals and internal integrated A/D converter of MCU.Finally,and it realizes the function to store and display data separately.C8051F020 was used to made hardware circuit simple,and it also enhanced the anti-interference ability.It features high precision and little impact.

    标签: C8051F020 单片机 多路 压力

    上传时间: 2013-11-16

    上传用户:yare

  • MSC1211 single-CHIP MICROPROCE

    摘要:随着住宅小区规模的不断扩大,小区的防火报警功能显得越来越重要。就此研制了基于MSC1211单片机的防火报警网络系统。该系统在各个火警布控点设置了独立的监控设备,并通过INTERNET网交换信息。详细介绍了系统硬件结构和软件设计,同时给出了电路原理图和程序流程图。实际运行证明:系统可靠性高、反应灵敏、工作速度快,具有很好的实用价值。 关键词:传感器  防火报警  监控节点  控制中心节点

    标签: single-CHIP MICROPROCE 1211 MSC

    上传时间: 2013-10-11

    上传用户:xaijhqx

  • 基于8051F330的音频信号发生器的设计

     MMC/SD卡以其优越的性能,在单片机嵌入式设备中得到广泛应用。将MMC/SD卡作为外部掉电存储介质应用于音频信号发生器中,通过8051F330单片机上的SPI接口,实现单片机—MMC/SD卡的存储扩展,设计了此硬件平台上的MMC/SD卡的单片机驱动程序,并给出了相应的程序代码,满足音频信号发生器的大容量存储要求。 Abstract:  MMC/SD card is more and more widely used in the single chip embedded devices for their excellent performances.This article introduces the application of MMC/SD card as the external power down storage medium in audio signal generator. The extension technology especially for storage of single chip-MMC/SD card via SPI interfaces in 8051F330 single chip, including designs single chip drive program of MMC/SD card based on hardware platform,and also gives the key coding of the program. The implementation of big capacity storage is meaningful in audio signal generator.

    标签: 8051F330 音频信号 发生器

    上传时间: 2014-12-27

    上传用户:黄华强

  • C8051F320列车安全巡检仪的设计

    提出了一种基于C8051F320的列车安全巡检仪的设计方案,详细阐述了巡检仪的各个模块的硬、软件设计。巡检仪集信息采集、轴温检测、照明和记录存储等功能于一体,实现了对列车安全巡检工作有效的监督和科学管理。系统软件采用C51编写,对单片机进行有效的电源管理,保证了巡检仪的稳定性、可靠性和低功耗性。 Abstract:  This paper puts forward a design of train safety inspection based on C8051F320,describes all modules hardware and software design of inspection instrument.The inspection instrument has the function of information collection, axle’s temperature detection, lighting and records storage.It can supervise and administer train safety inspection work effectively.The system software using C51 can manage the power of single chip microcomputer, and guarantee the stability, reliability and low power consumption of the inspection instrument.

    标签: C8051F320 列车 仪的设计 巡检

    上传时间: 2013-12-22

    上传用户:落花无痕

  • LS7266R1在电子式万能材料试验机中的应用

    针对材料试验机等设备中要求测量或控制材料拉伸或压缩的位移,一般采用光电轴角编码器检测位置信号,输出正交编码脉冲信号。若采用其他方法检测位置信号,必然导致电路设计复杂,可靠性降低。因此,提出一种基于LS7266R1的电子式万能材料试验机设计方案。给出了试验机中的控制器工作原理,LS7266R1与单片机的接口硬件设计,以及主程序软件流程图。巧妙地把力量传感器,位移传感器等机械运动状态的压力或拉力以及位置坐标,变成了电压信号和电脉冲数字信号,供A/D测量和LS7266R1计数,从而实现了独立完成材料试验控制或通过PC机串口命令完成材料试验控制。 Abstract:  Aiming at the requirement that the displacement of the tension and compression always be tested and controlled in the equipement such as material testing machine. The position signal was tested by photoelectric axial angle coder. Therefore, the paper proposes the design of electronic universal testing machine design based on LS7266R1. If the position signal detected by other methods, will inevitably lead to the circuit design complexity, reliability decreased. The work theory of the controller, the hardware interface design between LS7266R1 and single chip, and the flow chart of main program, are presented in this paper. The signal of the compression or tension power and displacement at working, which tested by power sensor and displacement sensor especially, is changed into electric voltage and electric pulse numerical signals. And these signals can be tested by A/D and counted by LS7266R1. Finally the test of the material properties can be controlled by itself, or controlled by the COM command of PC.

    标签: 7266R 7266 LS R1

    上传时间: 2013-11-02

    上传用户:yl1140vista

  • 基于MC33993的多路开关检测接口电路设计

    主要介绍了以PIC18F2480单片机为处理器,基于可编程多路开关检测接口器件MC33993实现的车用多路开关检测接口电路的设计。该设计克服了以往基于分立元件的检测接口电路的弊端,简化了接口电路设计,保证了车用开关工作的可靠性和安全性。 Abstract:  The design of automotive multiple switch detection interface circuit based on MC33993 is introduced mainly which adopts PIC18F2480 single chip microprocessor.This circuit overcomes shortage of traditional design which contains many schism elements, and the application of MC33993 also predigests the whole design of interface circuit and guarantees the dependability and security of the switch.

    标签: 33993 MC 多路开关 检测

    上传时间: 2013-11-19

    上传用户:star_in_rain

  • 基于C8051F005单片机的参数测试仪的设计

    介绍了基于单片机航空交流电参数测试仪的系统设计。以Silicon Labs公司的C8051F005单片机为核心设计出数据采集板,通过RS-232串口与上位机通讯。运用Lab Windows/CVI编写的上位机软件实现信号的检测以及波形和数据的显示,给出了测试仪硬件电路的组成和软件流程图。本系统具有硬件结构简单、容易实现和成本低等特点,在实际应用中其稳定性、精确性均能满足客户要求。 Abstract:  The design of aeronautics AC parameters tester based on the single-chip is introduced.The core component of data acquisition board is C8051F005 single chip of Silicon Labs Company,and communication with PC through RS-232. The signal processing software programmed with LabWindows/CVI can be used successfully to fulfill inspection of signal and display of the waveform and data. The hardware and software configuration of test instrument are provided.The hardware of the system is simple, and can be easily realized.The stability and precision of the measurement instrument are enough to meet the requirements.

    标签: C8051F005 单片机 仪的设计 参数测试

    上传时间: 2013-11-18

    上传用户:wang5829

  • 基于STC12C5408AD的记忆示波器

    主要介绍构成记忆示波器的STC12C5408AD增强型单片机8通道10位模数转换功能的设置、应用和具体的汇编程序设计,以及PC机串行通讯和图形显示的高速汇编程序的设计要点,并列举实例说明其应用效果。 Abstract:  The configuration, applications and the designs for? compiling program of the memorial oscillograph of 10 bits A/D conversation are introduced. It’s bases on STC12C5408AD 8? channels? single-chip? computer? in? enhancement? mode. It also recommends the devising essentials of high speed compiling program for PC serial communication and graphics display, lists examples to explain its effects in using.

    标签: C5408 5408 STC 12C

    上传时间: 2013-10-10

    上传用户:adada

  • 基于51单片机的作息号音自动播放器设计

     利用AT89C51型单片机定时和中断功能,配以LM386型音频功率放大器,构成了作息号音自动播放器,为学校和机关管理提供方便。 Abstract:  Using timing and interrupt function of the AT89C51 single-chip microcomputer and the LM386 audio power amplifier.It is constituted the automatic bugle player.This player facilitates the institution and the school daily management.

    标签: 51单片机 自动 播放器

    上传时间: 2013-10-10

    上传用户:wivai

  • SAM8系列S3C825A型单片机软件设计

    以S3C825A为例介绍三星公司SAM8系列单片机的内部结构及其软件开发环境,详细描述采用混合编程法来对SAM8系列单片机进行软件设计的一般方法,最后给出用混合编程法对S3C825A进行软件设计的具体应用实例。 Abstract:  With S3C825A,this paper firstly introduces the SAM8 series single-chip microcontrollers and their software development environment, then introduces mixed programming technology for SAM8 series single-chip microcontrollers. In the end, the application program is also given.

    标签: S3C825A SAM8 单片机 软件设计

    上传时间: 2013-12-09

    上传用户:ZZJ886