提出一种基于单片机AT89C51SND1C的MP3播放系统的设计方案。单片机集成了专用的解码器，使用K9F1208闪存作为外存储器，放音电路采用CS4330，存储文件通过播放器上的USB接口设备从PC机上直接下载，液晶显示采用LCD1602。方案设计简单，性价比高，低功耗，易扩展。由于采用的是通用单片机实现的，可以很容易地移植到其他微控制器系统中，有很强的市场竞争能力和实用价值。 Abstract: A MP3 player design based on microchip AT89C51SND1C was presented, which used K9F1208 Flash chip as the memory circuit and used CS4330 as play chip. Storage files were download from PC through USB interfaces player on the device，and the LCD/602 was used as display screen. This system had characteristics of simple design,low power,easy expand，low cost and high recognition. Using of universual microchip make it easy to transplant to other microcontrol system，and have strong market competitiom and practical value.
上传时间： 2014-12-27
上传用户：佳期如梦
为了在工业生产及过程控制中准确测量温度，设计了一种基于低功耗MSP430单片机的数字温度计。整个系统通过单片机MSP430F1121A控制DS18B20读取温度，采用数码管显示，温度传感器DS18B20与单片机之间通过串口进行数据传输。MSP430系列单片机具有超低功耗，且外围的整合性高，DS18B20只需一个端口即可实现数据通信，连接方便。通过多次实验证明，该系统的测试结果与实际环境温度一致，除了具有接口电路简单、测量精度高、误差小、可靠性高等特点外，其低成本、低功耗的特点使其拥有更广阔的应用前景。 Abstract: In order to obtain accurate measuring temperature in industrial production and process control， a digital thermometer based on MSP430 MCU is designed. The system uses MSP430F1121A MCU to control DS18B20， and gets the temperature data， which is displayed on the LED. The temperature sensor DS18B20 and MCU transmit data through serial communication. MSP430 series has ultra-low power and high integration， DS18B20 only needs one port to achieve data communication. Through many experimental results prove， this system is consistent with actual environment temperature. The system has characteristics of interface circuit simple， high measuring accuracy， minor error， high reliability， besides， the characteristics of low cost and low power make it having vaster application prospect.
上传时间： 2013-10-16
上传用户：wettetw
针对当前安检力学试验机所能完成的试验种类单一、自动化程度低等问题，提出一种以ATmega128单片机为核心控制器的安检力学试验机的设计。详细阐述了该安检力学试验机各个组成部分的设计原理和方案，并且给出了各部分的软件设计思想和操作流程。经过大量测试试验表明：设计的安检力学试验机可以完成多达十余种的力学安检试验，完全符合相关国家标准，并且具有数据采集精度高、传输速度快、操作安全简便等特点，实现了安检设备的多功能化、数字化和自动化。 Abstract: Currently， many mechanical security testing machines have only one function. The degree of automation of them is low. To solve those problems， a new kind of mechanical security testing machine， using ATmega128 micro-controller as its core controller， has been advanced. It describes the components of the machine. The principles and the scheme in the designing processes are presented in detail， and the software architecture and the operation processes of each part are given. After having done many testing， we have reached the following conclusions: the mechanical security testing machine presented can do over ten mechanical security tests complying with related national standards. It has high data acquisition accuracy and high transmission speed. The operation of the machine is simple and safe. In general， this machine is a multi-functional， highly automatic， digitalized security testing device.
上传时间： 2013-11-05
上传用户：a67818601
Bootloader是微处理器上电时运行的第一段代码，它可以通过通信接口实现对微处理器内部应用程序的更新升级，为网络化嵌入式产品的应用程序升级带来极大的便利。由于目前没有统一嵌入式系统的Bootloader。基于NEC 78K0系列单片机自编程原理，设计出一个适用于78K0/Fx2系列单片机的Bootloader，并能够通过单片机串口在线升级应用程序。 Abstract: Bootloader is the first piece of code executed after microprocessor startup. It makes the embedded product’s firmware update conveniently through communication interface. However， no unified bootloader is available for all kinds of microprocessor products. Based on the principle of self-programming NEC 78K0s’ series， a useful Bootloader which is suitable for 78K0/Fx2s’ series MCU is designed，the design can update the application through serial ports.
标签： Bootloader MCU 自编程
上传时间： 2013-10-26
上传用户：fang2010
该系统以单片机为控制核心，结合双二阶环路滤波器的基本原理，使其同时具备低通、高通、带通、带阻滤波器的功能，利用DAC等效为可变电阻，实现了滤波器参数的程控。该系统可通过键盘设置滤波器的种类、截止频率和Q值，低通、高通滤波器截止频率以及带通、带阻滤波器中心频率可预置范围为100 Hz~50 kHz，Q值范围为0.5~5。系统采用矩阵键盘和LCD液晶显示，人机交互界面友好。
标签： 程控滤波器
上传时间： 2013-11-29
上传用户：ajaxmoon
24c16读写驱动程序，//=-------------------------------------------------------------------------------/*模块调用:读数据:read(unsigned int address)写数据:write(unsigned int address,unsigned char dd) dd为要写的 数据字节*///------------------------------------------------------------------------------ sbit sda=P3^0;sbit scl=P3^1; sbit a0=ACC^0; //定义ACC的位，利用ACC操作速度最快sbit a1=ACC^1;sbit a2=ACC^2;sbit a3=ACC^3;sbit a4=ACC^4;sbit a5=ACC^5;sbit a6=ACC^6;sbit a7=ACC^7; //------------------------------------------------------------------------------#pragma disablevoid s24(void) //起始函数{_nop_(); scl=0; sda=1; scl=1; _nop_(); sda=0; _nop_(); _nop_(); scl=0; _nop_(); _nop_(); sda=1;} //------------------------------------------------------------------------------#pragma disablevoid p24(void) //停止函数{sda=0; scl=1; _nop_(); _nop_(); sda=1;} //-----------------------------------------------------------------------------#pragma disableunsigned char rd24(void) /////////////////从24c16读一字节数据{ ACC=0x00;sda=1;scl=1;a7=sda;_nop_();_nop_();_nop_();_nop_();scl=0;scl=1;a6=sda;_nop_();_nop_();_nop_();_nop_();scl=0;scl=1;a5=sda;_nop_();_nop_();_nop_();_nop_();scl=0;scl=1;a4=sda;_nop_();_nop_();_nop_();_nop_();scl=0;scl=1;a3=sda;_nop_();_nop_();_nop_();_nop_();scl=0;scl=1;a2=sda;_nop_();_nop_();_nop_();_nop_();scl=0;scl=1;a1=sda;_nop_();_nop_();_nop_();_nop_();scl=0;scl=1;a0=sda;_nop_();_nop_();_nop_();_nop_();scl=0;sda=1;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0; /// ///////////////24c16的一位回答位。return(ACC);}//------------------------------------------------------------------------------#pragma disablevoid wd24(unsigned char dd) ////////////////向24c16写一字节数据{ sda=1;ACC=dd;sda=a7;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=a6;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=a5;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=a4;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=a3;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=a2;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=a1;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=a0;scl=1;_nop_();_nop_();_nop_();_nop_();scl=0;sda=0;scl=1;//scl=0;(在下面程序中)}//---------------------------------------------------------------------------#pragma disableunsigned char read(unsigned int address){unsigned char dd; s24(); ////////////////////////开始条件 wd24(0xa0); /////////////////////////写器件地址（写命令） _nop_();_nop_();_nop_();_nop_(); scl=0; ///////////////////////////////////接收器件地址确认信号 wd24(address); //////////////////////////// 写数据地址 _nop_();_nop_();_nop_();_nop_(); scl=0;s24(); ///////////////////////////////////开始条件 wd24(0xa1); /////////////////////////////写器件地址（读命令） scl=0; dd=rd24(); //////////////////////////////////读 一字节 p24(); ////////////////////////////////////停止条件 return(dd);}//------------------------------------------------------------------------------#pragma disablevoid write(unsigned int address,unsigned char dd){s24(); /////////////////开始条件 wd24(0xa0); ////////////////////////写器件地址； scl=0; wd24(address); /////////////////////写数据地址 scl=0; wd24(dd); //////////////////////////写dd数据 scl=0; p24(); /////////////////////////停止条件； }
上传时间： 2013-11-18
上传用户：墙角有棵树
针对使用硬件描述语言进行设计存在的问题，提出一种基于FPGA并采用DSP Builder作为设计工具的数字信号处理器设计方法。并按照Matlab/Simulink/DSP Builder/QuartusⅡ设计流程，设计了一个12阶FIR 低通数字滤波器，通过Quartus 时序仿真及嵌入式逻辑分析仪SignalTapⅡ硬件测试对设计进行了验证。结果表明，所设计的FIR 滤波器功能正确，性能良好。 Abstract: Aiming at the problems in designing DSP using HDL，a method of designing DSP based on FPGA which using DSP Builder as designed tool is pointed out.A 12-order low-pass FIR digital filter was designed according to the process of Matlab/Simulink/DSP Builder/QuartusⅡ, and the design was verified by the timing simulation based on QuartusⅡand practical test based on SignalTapⅡ. The result shows the designed filter is correct in function and good in performance.
上传时间： 2013-11-17
上传用户：lo25643
为了扩大监控范围，提高资源利用率，降低系统成本，提出了一种多通道视频切换的解决方案。首先从视频信号分离出行场信号，然后根据行场信号由DSP和FPGA产生控制信号，控制多路视频通道之间的切换，从而实现让一个视频处理器同时监控不同场景。实验结果表明，该方案可以在视频监控告警系统中稳定、可靠地实现视频通道的切换。 Abstract: To expand the scope of monitoring， improve resource utilization， reduce system cost， a multiple video channels signal switching method is pointed out in this paper. First， horizontal sync signal and field sync signal from the video signal are separated， then control signal according to the sync signal by DSP and FPGA is generated to control the switching between multiple video channels. Thus， it achieves to make a video processor to monitor different place. Experimental results show that the method can realize video channel switching reliably， and is applied in the video monitoring warning system successfully.
上传时间： 2013-11-09
上传用户：不懂夜的黑
设计一种应用于某全地形ATV车载武器装置中的中控系统，该系统设计是以TMS320F2812型DSP为核心，采用模块化设计思想，对其硬件部分进行系统设计，能够完成对武器装置高低、回转方向的运动控制，实现静止或行进状态中对目标物的测距，自动瞄准以及按既定发射模式发射弹丸和各项安全性能检测等功能。通过编制相应的软件，对其进行系统调试，验证了该设计运行稳定。 Abstract: A central control system applied to an ATV vehicle weapons is designed. The system design is based on TMS320F2812 DSP as the core， uses modular design for its hardware parts. The central control system can complete the motion control of the level of weapons and equipment， rotation direction， to achieve a state of static or moving objects on the target ranging， auto-targeting and according to the established target and the projectile and the launch of the security performance testing and other functions. Through the development of appropriate software and to carry out system testing to verify the stability of this design and operation.
上传时间： 2013-11-02
上传用户：jshailingzzh
针对嵌入式机器视觉系统向独立化、智能化发展的要求，介绍了一种嵌入式视觉系统--智能相机。基于对智能相机体系结构、组成模块和图像采集、传输和处理技术的分析，对国内外的几款智能相机进行比较。综合技术发展现状，提出基于FPGA+DSP模式的硬件平台，并提出智能相机的发展方向。分析结果表明，该系统设计可以实现脱离PC运行，完成图像获取与分析，并作出相应输出。 Abstract: This paper introduced an embedded vision system-intelligent camera ，which was for embedded machine vision systems to an independent and intelligent development requirements. Intelligent camera architecture， component modules and image acquisition， transmission and processing technology were analyzed. After comparing integrated technology development of several intelligent cameras at home and abroad， the paper proposed the hardware platform based on FPGA+DSP models and made clear direction of development of intelligent cameras. On the analysis of the design， the results indicate that the system can run from the PC independently to complete the image acquisition and analysis and give a corresponding output.
上传时间： 2013-10-24
上传用户：bvdragon
