针对当前安检力学试验机所能完成的试验种类单一、自动化程度低等问题，提出一种以ATmega128单片机为核心控制器的安检力学试验机的设计。详细阐述了该安检力学试验机各个组成部分的设计原理和方案，并且给出了各部分的软件设计思想和操作流程。经过大量测试试验表明：设计的安检力学试验机可以完成多达十余种的力学安检试验，完全符合相关国家标准，并且具有数据采集精度高、传输速度快、操作安全简便等特点，实现了安检设备的多功能化、数字化和自动化。 Abstract: Currently， many mechanical security testing machines have only one function. The degree of automation of them is low. To solve those problems， a new kind of mechanical security testing machine， using ATmega128 micro-controller as its core controller， has been advanced. It describes the components of the machine. The principles and the scheme in the designing processes are presented in detail， and the sOFtware architecture and the operation processes of each part are given. After having done many testing， we have reached the following conclusions: the mechanical security testing machine presented can do over ten mechanical security tests complying with related national standards. It has high data acquisition accuracy and high transmission speed. The operation of the machine is simple and safe. In general， this machine is a multi-functional， highly automatic， digitalized security testing device.
上传时间： 2013-11-05
上传用户：a67818601
Information in this document is subject to change without notice and does notrepresent a commitment on the part of the manufacturer. The sOFtware describedin this document is furnished under license agreement or nondisclosureagreement and may be used or copied only in accordance with the terms of theagreement. It is against the law to copy the sOFtware on any medium except asspecifically allowed in the license or nondisclosure agreement. The purchasermay make one copy of the sOFtware for backup purposes. No part of this manualmay be reproduced or transmitted in any form or by any means, electronic ormechanical, including photocopying, recording, or information storage andretrieval systems, for any purpose other than for the purchaser’s personal use,without written permission.
上传时间： 2014-12-27
上传用户：Tracey
FEATURES400 MSPS internal clock speedIntegrated 10-bit DAC32-bit tuning wordPhase noise ≤ –120 dBc/Hz @ 1 kHz offset (DAC output)Excellent dynamic performance>75 dB SFDR @ 160 MHz (±100 kHz offset) AOUTSerial I/O control1.8 V power supplysOFtware and hardware controlled power-down48-lead TQFP/EP packageSupport for 5 V input levels on most digital inputsPLL REFCLK multiplier (4× to 20×)Internal oscillator; can be driven by a single crystalPhase modulation capabilityMultichip synchronization
上传时间： 2014-12-04
上传用户：axin881314
The MSP-FET430PIF is a Parallel Port interface (does not include target board) that is used to program and debug MSP430 FET tools and test boards through the JTAG interface. This interface is included in our FET tools, but sold without the development board. This interface uses a Parallel PC Port to communicate to the Debugger sOFtware (IAR Kickstart sOFtware included) running on the PC. The interface uses the standard 14 pin header to communicate to the MSP430 device using the standard JTAG protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is extremely low power, no external power supply is required. The tool has an integrated sOFtware environment and connects directly to the PC which greatly simplifies the set-up and use of the tool. The flash development tool supports development with all MSP430 flash parts. Features MSP430 debugging interface to connect a MSP430-Flash-device to a Parallel port on a PC Supports JTAG debug protocol (NO support for Spy-Bi-Wire (2-wire JTAG) debug protocol, Spy-Bi-Wire (2-wire JTAG) is supported by MSP-FET430UIF) Parallel Port cable and a 14-conductor target cable Full documentation on CD ROM Integrated IAR Kickstart user interface which includes: Assembler Linker Limulator Source-level debugger Limited C-compiler Technical specifications: Backwardly compatable with existing FET tool boards.
上传时间： 2013-10-26
上传用户：fengweihao158@163.com
The MSP-FET430U14 is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required. The debugging tool interfaces the MSP430 to the included integrated sOFtware environment and includes code to start your design immediately. The MSP-FET430UIF development tools supports development with all MSP430 flash devices
上传时间： 2013-10-28
上传用户：13691535575
Atmel AVR 单片机上网方案 The AVR Embedded Internet Toolkit is the fastest way to connect anyembedded design to the Internet. It includes an ATmega AVR microcontroller,dedicated hardware, and all required sOFtware protocols forconnecting to the Internet. The AVR Embedded Internet Toolkit is thefastest choice for getting started with embedded Internet and for developinga complete embedded application connected to the Internet.
上传时间： 2013-11-06
上传用户：xjz632
单片机开发仿真环境keil初学者教程：平凡教程精品系列KEIL PDF教程第四讲.rar 平凡教程精品系列KEIL PDF教程第三讲.rar 平凡教程精品系列KEIL PDF教程第二讲.rar 平凡教程精品系列KEIL PDF教程第一讲.rar 《uVision2调试命令中文版》56页.zip 《RTX51中文版》KEIL RTX51实时操作.zip 《RTX51中文版》KEIL RTX51实时操作.zip 《uVision2入门教程》 中文PDF92页.rar keil c51汉化.rar KEIL PDF教程1（周立功编写）184页.rar AT24C02串行E2PROM的工作原理与读写.doc 如何用Keil 在线调试nRF24E1.pdf Keil C51编译、调试软件使用指南.pdf 嵌入式c编程语言入门与深入.pdf Keil sOFtware–Cx51 编译器用户手册403页.pdf
上传时间： 2013-11-07
上传用户：wcl168881111111
MPLAB C30用户指南(英文) HIGHLIGHTSThe information covered in this chapter is as follows:• About this Guide• Recommended Reading• Troubleshooting• The Microchip Web Site• Development Systems Customer Notification Service• Customer Support Document LayoutThe document layout is as follows:• Chapter 1: Compiler Overview – describes MPLAB C30, development tools andfeature set.• Chapter 2: Differences between MPLAB C30 and ANSI C – describes thedifferences between the C language supported by MPLAB C30 syntax and thestandard ANSI-89 C.• Chapter 3: Using MPLAB C30 – describes how to use the MPLAB C30 compilerfrom the command line.• Chapter 4: MPLAB C30 Runtime Environment – describes the MPLAB C30runtime model, including information on sections, initialization, memory models, thesOFtware stack and much more.• Chapter 5: Data Types – describes MPLAB C30 integer, floating point and pointerdata types.• Chapter 6: Device Support Files – describes the MPLAB C30 header and registerdefinition files, as well as how to use with SFR’s.• Chapter 7: Interrupts – describes how to use interrupts.• Chapter 8: Mixing Assembly Language and C Modules – provides guidelines tousing MPLAB C30 with MPLAB ASM30 assembly language modules.
上传时间： 2013-10-21
上传用户：13925096126
PICKIT™ 2 PROGRAMMER-TO-GO USER GUIDE The PICkit 2 Programmer-To-Go functionality allows a PIC MCU memory image to be downloaded into the PICkit 2 unit for later programming into a specific PIC MCU. No sOFtware or PC is required to program devices once the PICkit 2 unit is set up for Programming-To-Go. A USB power source for the PICkit 2 is all that is needed.
标签： PROGRAMMER-TO PICKIT 8482
上传时间： 2013-10-29
上传用户：ca05991270
Keil C51使用详解Keil C51 是美国Keil sOFtware 公司出品的51 系列兼容单片机C 语言软件开发系统，与汇编相比，C 语言在功能上、结构性、可读性、可维护性上有明显的优势，因而易学易用。用过汇编语言后再使用C 来开发，体会更加深刻。Keil C51 软件提供丰富的库函数和功能强大的集成开发调试工具，全Windows界面。另外重要的一点，只要看一下编译后生成的汇编代码，就能体会到Keil C51生成的目标代码效率非常之高，多数语句生成的汇编代码很紧凑，容易理解。在开发大型软件时更能体现高级语言的优势。下面详细介绍 Keil C51 开发系统各部分功能和使用。第二节 Keil C51 单片机软件开发系统的整体结构C51 工具包的整体结构，如图(1)所示，其中uVision 与Ishell 分别是C51 forWindows 和for Dos 的集成开发环境(IDE)，可以完成编辑、编译、连接、调试、仿真等整个开发流程。开发人员可用IDE 本身或其它编辑器编辑C 或汇编源文件。然后分别由C51 及A51 编译器编译生成目标文件(.OBJ)。目标文件可由LIB51 创建生成库文件，也可以与库文件一起经L51 连接定位生成绝对目标文件(.ABS)。ABS 文件由OH51 转换成标准的Hex 文件，以供调试器dScope51 或tScope51 使用进行源代码级调试，也可由仿真器使用直接对目标板进行调试，也可以直接写入程序存贮器如EPROM 中。图(1) C51 工具包整体结构图第三节 Keil C51 工具包的安装81. C51 for Dos在 Windows 下直接运行软件包中DOS\C51DOS.exe 然后选择安装目录即可。完毕后欲使系统正常工作须进行以下操作(设C:\C51 为安装目录)：修改 Autoexec.bat，加入path=C:\C51\BinSet C51LIB=C:\C51\LIBSet C51INC=C:\C51\INC然后运行Autoexec.bat2. C51 for Windows 的安装及注意事项：在 Windows 下运行软件包中WIN\Setup.exe，最好选择安装目录与C51 for Dos相同，这样设置最简单(设安装于C:\C51 目录下)。然后将软件包中crack 目录中的文件拷入C:\C51\Bin 目录下。第四节 Keil C51 工具包各部分功能及使用简介1. C51 与A51(1) C51C51 是C 语言编译器，其使用方法为：C51 sourcefile[编译控制指令]或者 C51 @ commandfile其中 sourcefile 为C 源文件(.C)。大量的编译控制指令完成C51 编译器的全部功能。包控C51 输出文件C.LST，.OBJ，.I 和.SRC 文件的控制。源文件(.C)的控制等，详见第五部分的具体介绍。而 Commandfile 为一个连接控制文件其内容包括：.C 源文件及各编译控制指令，它没有固定的名字，开发人员可根据自己的习惯指定，它适于用控制指令较多的场合。(2) A51A51 是汇编语言编译器，使用方法为：9A51 sourcefile[编译控制指令]或 A51 @ commandfile其中sourcefile 为汇编源文件(.asm或.a51)，而编译控制指令的使用与其它汇编如ASM语言类似，可参考其他汇编语言材料。Commandfile 同C51 中的Commandfile 类似，它使A51 使用和修改方便。2. L51 和BL51(1) L51L51 是Keil C51 软件包提供的连接/定位器，其功能是将编译生成的OBJ 文件与库文件连接定位生成绝对目标文件(.ABS)，其使用方法为：L51 目标文件列表[库文件列表] [to outputfile] [连接控制指令]或 L51 @Commandfile源程序的多个模块分别经 C51 与A51 编译后生成多个OBJ 文件，连接时，这些文件全列于目标文件列表中，作为输入文件，如果还需与库文件(.LiB)相连接，则库文件也必须列在其后。outputfile 为输文件名，缺少时为第一模块名，后缀为.ABS。连接控制指令提供了连接定位时的所有控制功能。Commandfile 为连接控制文件，其具体内容是包括了目标文件列表，库文件列表及输出文件、连接控制命令，以取代第一种繁琐的格式，由于目标模块库文件大多不止1 个，因而第2 种方法较多见，这个文件名字也可由使用者随意指定。(2) Bl51BL51 也是C51 软件包的连接/定位器，其具有L51 的所有功能，此外它还具有以下3 点特别之处：a. 可以连接定位大于64kBytes 的程序。b. 具有代码域及域切换功能(CodeBanking & Bank Switching)c. 可用于RTX51 操作系统RTX51 是一个实时多任务操作系统，它改变了传统的编程模式，甚至不必用main( )函数，单片机系统软件向RTOS 发展是一种趋势，这种趋势对于186 和38610及68K 系列CPU 更为明显和必须，对8051 因CPU 较为简单，程序结构等都不太复杂，RTX51 作用显得不太突出，其专业版软件PK51 软件包甚至不包括RTX51Full，而只有一个RTX51TINY 版本的RTOS。RTX51 TINY 适用于无外部RAM 的单片机系统，因而可用面很窄，在本文中不作介绍。Bank switching 技术因使用很少也不作介绍。3. DScope51，Tscope51 及Monitor51(1) dScope51dScope51 是一个源级调试器和模拟器，它可以调试由C51 编译器、A51 汇编器、PL/M-51 编译器及ASM－51 汇编器产生的程序。它不需目标板（for windows 也可通过mon51 接目标板），只能进行软件模拟，但其功能强大，可模拟CPU 及其外围器件，如内部串口，外部I/O 及定时器等，能对嵌入式软件功能进行有效测试。
上传时间： 2013-11-01
上传用户：zhouxuepeng1
