/**************************************************************** 外部晶振8M PA0~3：四位数码管的位选 PB0~7：数码管的8位段选 外部中断0用于计数 定时器0溢出中断的定时为1ms 说明 ：检测到水流较小时，继电器延时1秒关闭 ******************************************************************/ #include<iom16v.h> #include<macros.h> #define uchar unsigned char #define uint unsigned int char led_7[10]={0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F}; //数码管段选 char position[4]={0xfe,0xfd,0xfb,0xf7};//数码管位选 uint sumnum=0; //用于记录1000ms内进入中断的次数 uint time=0; //记录进入比较定时器0的次数 uint num=0; //记录1ms内进入中断的次数 uint count=0; //进入外部中断0的次数 uchar flag; uint sumnum1; //记录100ms内的数目 /***************************函数声明***************************/ void delay(); void display(uint m ); void init(); void init_0(); void init_2(); void _delay_us(uint l) { unsigned int i; for(i=0;i<l;i++) { asm("nop"); } } /**************************主函数***********************************/ void main() { init(); init_0(); init_2(); while(sumnum<5) { PORTD=0XBF; segdisplay(sumnum1); } while(1) { segdisplay(sumnum1); } } /*************************扫描数码管时的延时函数*********************/ void delay() { uchar i,j; for(i=6;i>0;i--) for(j=225;j>0;j--); } /************************数码管显示函数*****************************/ void segdisplay( int temp) { int seg[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; int temp1,temp2,temp3,temp4; temp1=temp/1000; temp2=(temp/100)%10; temp3=(temp/10)%10; temp4=temp%10; DDRB=0xff; DDRA|=0x0f; PORTA=~BIT(3); PORTB=seg[temp1]; _delay_us(100); PORTA=~BIT(2); PORTB=seg[temp2]; _delay_us(100); PORTA=~BIT(1); PORTB=seg[temp3]; _delay_us(100); PORTA=~BIT(0); PORTB=seg[temp4]; _delay_us(100); } /***********************管脚初始化函数*********************/ void init() { DDRD|=0X40; //PD4 设置为输出 PORTD=0XBF; DDRA=0XFF; DDRB=0XFF; PORTA=0XFF; PORTB=0XFF; } /***********************外部中断0初始化*********************/ void init_0() { MCUCR=0X02; //INT0为下降沿触发 GICR=0X40; //使能INT0中断 SREG=0X80; //使能总中断 } /**********************定时器2初始化***********************/ void init_2() { TCCR0=0x03; // 内部时钟，64 分频（8M/64=125KHz） TCNT0=0x83; //装初值 TIMSK=0x01; // 允许 T/C0溢出中断中断 } /***********************外部中断0子函数********************/ #pragma interrupt_handler int0_isr:2 void int0_isr(void) { count++; } /*********************定时计数器0溢出中断子函数*****************/ #pragma interrupt_handler int0_over:10 void int0_over(void) { TCNT0=0x83; //重装初值 if((time%100) == 0) sumnum1 = num; if(time == 1000) { sumnum=num; if(sumnum<10) { if((flag==1)&&(sumnum<10)) { PORTD=0XFF; flag=0; } flag++; } else PORTD=0XBF; num=0; time=0; } num+=count; count=0; ++time; }
标签： C语言
上传时间： 2016-03-09
上传用户：彦 yan
STB_DRIVE_L; for(k=0;k<8;k++) { CLK_DRIVE_L; if(a&0x01){DIO_DRIVE_H;} else {DIO_DRIVE_L;} a>>=1; CLK_DRIVE_H; }
上传时间： 2016-06-14
上传用户：lhx117yy
#include "STC90.h" #include < intrins.h > #define uchar unsigned char #define uint unsigned int #define led_port P1 sbit IR_RE = P3^2; sbit led_r = P1^3; sbit led_g = P1^4; sbit led_b = P1^5; sbit led_wd = P1^7; sbit K1 =P3^0 ; //增加键 sbit K2 =P3^1 ; //减少键 sbit BEEP =P3^7 ; //蜂鸣器 uchar temp,temp1; bit k=0; //红外解码判断标志位，为0则为有效信号，为1则为无效 bit Flag2; uchar date[4]={0,0,0,0}; //date数组为存放地址原码，反码，数据原码，反码 uint lade_1,lade_2,lade_3,lade_4; uint num; uchar date_ram,ee_temp,ee_temp1; uchar WDT_NUM=0; uchar const dofly[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};// 显示段码值01234567 uchar code seg[]={7,6,5,4,3,2,1,0};//分别对应相应的数码管点亮,即位码 unsigned long disp_date; void fade(); void fade1(); /*************************** 看门狗子程序*************************/ void watchdog_timer() { if(WDT_NUM==5) { WDT_NUM=0; led_wd=!led_wd; } WDT_NUM++; WDT_CONTR=0x3f; } /******************************************************************/ void delay(unsigned int cnt) { while(--cnt); } /*--------------------------延时1ms程子程序-----------------------*/ void delay_1ms(uint z) { uint x,y; for(x=z;x>0;x--) for(y=126;y>0;y--); } /*--------------------------延时1ms程子程序-----------------------*/ delay1000() { uchar i,j; i=5; do{j=95; do{j--;} while(j); i--; } while(i); } /*---------------------------延时882us子程序-----------------------*/ delay882() { uchar i,j; i=6; do{j=71; do{j--;} while(j); i--; }while(i); } /*--------------------------延时2400us程子程序-----------------------*/ delay2400() { uchar i,j; i=5; do{j=237; do{j--;} while(j); i--; }while(i); } /**********************************************************************/ /* void display() { uchar i; for(i=0;i<8;i++) { P0=dofly[disp_date%10];//取显示数据，段码 P2=seg[i]; //取位码 delay_1ms(1); disp_date/=10; } } */ /*********************************************************************/ uchar EEPROM_read(uint addr)//EEPROM字节读 { ISP_CONTR=0x83; //系统时钟<12M时，对ISP_CONTR寄存器设置的值，本电路为11.0592M ISP_CMD=1; //字节读 ISP_ADDRH=(addr&0xff00)>>8; ISP_ADDRL=addr&0x00ff; ISP_TRIG=0x46; ISP_TRIG=0xb9; _nop_(); _nop_(); return ISP_DATA; } //-------------------------------------------------------------------- void EEPROM_write(uint addr,uchar dat)//EEPROM字节写 { ISP_CONTR=0x83; //系统时钟<12M时，对ISP_CONTR寄存器设置的值，本电路为11.0592M ISP_CMD=2; //字节编程 ISP_ADDRH=(addr&0xff00)>>8; ISP_ADDRL=addr&0x00ff; ISP_DATA=dat; ISP_TRIG=0x46; ISP_TRIG=0xb9; _nop_(); _nop_(); } //-------------------------------------------------------------------- void EEPROM_ERASE(uint addr)//EEPROM扇区擦除 { ISP_CONTR=0x83; //系统时钟<12M时，对ISP_CONTR寄存器设置的值，本电路为11.0592M ISP_CMD=3; //扇区擦除 ISP_ADDRH=(addr&0xff00)>>8; ISP_ADDRL=addr&0x00ff; ISP_TRIG=0x46; ISP_TRIG=0xb9; _nop_(); _nop_(); } //************************************************************** /*----------------------------------------------------------*/ /*-----------------------红外解码程序(核心)-----------------*/ /*----------------------------------------------------------*/ void IR_decode() { uchar i,j; while(IR_RE==0); delay2400(); if(IR_RE==1) //延时2.4ms后如果是高电平则是新码 { delay1000(); delay1000(); for(i=0;i<4;i++) { for(j=0;j<8;j++) { while(IR_RE==0); //等待地址码第1位高电平到来 delay882(); //延时882us判断此时引脚电平 ///CY=IR_RE; if(IR_RE==0) { date[i]>>=1; date[i]=date[i]|0x00; } else if(IR_RE==1) { delay1000(); date[i]>>=1; date[i]=date[i]|0x80; } } //1位数据接收结束 } //32位二进制码接收结束 } } /* void LED_PWM() { lade_2=num; //384 lade_4=num; //384 while(lade_2!=0&Flag2==1) { for(lade_3=512;lade_3>lade_4;lade_3--) //512 { led_port=0x00; delay(1); } lade_3=512; //512 lade_4--; for(lade_1=0;lade_1<lade_2;lade_1++) { led_port=0x38; //c7 delay(1); } lade_1=0; lade_2--; if(temp!=0x0c&Flag2==1) { lade_2=0; } lade_2=num; //384 lade_4=num; //384 } } */ void calc() { EEPROM_read(0x2000); ee_temp1=ISP_DATA; ee_temp=ee_temp1&0x0f; //************************************* 1 /* if(date[3]==0xff&Flag2==1) { if(num>=20) { num=num-80; } //else num=1; LED_PWM(); } if(date[3]==0xfe&Flag2==1) { if(num<=500) { num=num+80; } // else num=511; LED_PWM(); } if(ee_temp1==0xfd) { led_port=0x00; watchdog_timer(); } if(ee_temp1==0xfc) { led_port=0x00; led_r=1; led_g=1; led_b=1; watchdog_timer(); } */ //********************************************** 2 if(ee_temp1==0xfb) { led_port=0x00; led_r=1; watchdog_timer(); } if(ee_temp1==0xfa) { led_port=0x00; led_g=1; watchdog_timer(); } if(ee_temp1==0xf9) { led_port=0x00; led_b=1; watchdog_timer(); } if(ee_temp1==0xf8) { led_port=0x00; led_r=1; led_g=1; led_b=1; watchdog_timer(); } //************************************** 3 if(ee_temp1==0xf7) { uint fade_1,fade_2,fade_3,fade_4; fade_2=448; //384 fade_4=448; //384 while(fade_2!=0&ee_temp==0x07) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x10; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x07) { fade_2=0; } watchdog_timer(); fade_2=448; //384 fade_4=448; //384 } } if(ee_temp1==0xf6) { uint fade_1,fade_2,fade_3,fade_4; fade_2=448; //384 fade_4=448; //384 while(fade_2!=0&ee_temp==0x06) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x20; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x06) { fade_2=0; } watchdog_timer(); fade_2=448; //384 fade_4=448; //384 } } if(ee_temp1==0xf5) { uint fade_1,fade_2,fade_3,fade_4; fade_2=448; //384 fade_4=448; //384 while(fade_2!=0&ee_temp==0x05) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x08; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x05) { fade_2=0; } watchdog_timer(); fade_2=448; //384 fade_4=448; //384 } } if(ee_temp1==0xf4) { while(ee_temp==4) { led_port=0x00; led_r=1; delay_1ms(200); led_port=0x00; led_r=1; led_g=1; delay_1ms(200); led_port=0x00; led_g=1; delay_1ms(200); watchdog_timer(); led_port=0x00; led_g=1; led_b=1; delay_1ms(200); led_port=0x00; led_b=1; delay_1ms(200); led_port=0x00; led_b=1; led_r=1; delay_1ms(200); watchdog_timer(); } } //************************************** 4 if(ee_temp1==0xf3) { uint fade_1,fade_2,fade_3,fade_4; fade_2=416; //384 fade_4=416; //384 while(fade_2!=0&ee_temp==0x03) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x10; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x03) { fade_2=0; } watchdog_timer(); fade_2=416; //384 fade_4=416; //384 } } if(ee_temp1==0xf2) { uint fade_1,fade_2,fade_3,fade_4; fade_2=384; //384 fade_4=384; //384 while(fade_2!=0&ee_temp==0x02) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x20; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x02) { fade_2=0; } watchdog_timer(); fade_2=384; //384 fade_4=384; //384 } } if(ee_temp1==0xf1) { uint fade_1,fade_2,fade_3,fade_4; fade_2=348; //384 fade_4=348; //384 while(fade_2!=0&ee_temp==0x01) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x08; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x01) { fade_2=0; } watchdog_timer(); fade_2=348; //384 fade_4=348; //384 } } if(ee_temp1==0xf0) { while(ee_temp==0) { led_port=0x00; led_r=1; delay_1ms(500); watchdog_timer(); led_port=0x00; led_g=1; delay_1ms(500); led_port=0x00; led_b=1; delay_1ms(500); watchdog_timer(); } } //******************************************** 5 if(ee_temp1==0xef) { uint fade_1,fade_2,fade_3,fade_4; fade_2=384; //384 fade_4=384; //384 while(fade_2!=0&ee_temp==0x0f) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x10; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0f) { fade_2=0; } watchdog_timer(); fade_2=384; //384 fade_4=384; //384 } } if(ee_temp1==0xee) { uint fade_1,fade_2,fade_3,fade_4; fade_2=320; //384 fade_4=320; //384 while(fade_2!=0&ee_temp==0x0e) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x20; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0e) { fade_2=0; } watchdog_timer(); fade_2=320; //384 fade_4=320; //384 } } if(ee_temp1==0xed) { uint fade_1,fade_2,fade_3,fade_4; fade_2=320; //384 fade_4=320; //384 while(fade_2!=0&ee_temp==0x0d) { for(fade_3=512;fade_3>fade_4;fade_3--) //512 { led_port=0x08; delay(1); } fade_3=512; //512 fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0d) { fade_2=0; } watchdog_timer(); fade_2=320; //384 fade_4=320; //384 } } if(ee_temp1==0xec) fade(); //******************************************* 6 if(ee_temp1==0xeb) { led_port=0x00; led_r=1; led_g=1; watchdog_timer(); } if(ee_temp1==0xea) { led_port=0x00; //led_r=0; led_g=1; led_b=1; watchdog_timer(); } if(ee_temp1==0xe9) { led_port=0x00; led_r=1; //led_g=0; led_b=1; watchdog_timer(); } if(ee_temp1==0xe8) fade1(); } void fade() { // uchar i; uint fade_1,fade_2,fade_3,fade_4; fade_2=512; fade_4=511; while(fade_2!=0&ee_temp==0x0c) { for(fade_3=512;fade_3>fade_4;fade_3--) { led_port=0x10; delay(1); } fade_3=512; fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x0c) { fade_2=0; } } watchdog_timer(); fade_2=512; fade_4=511; while(fade_2!=0&ee_temp==0x0c) { if(ee_temp!=0x0c) { fade_2=0; } for(fade_3=512;fade_3>fade_4;fade_3--) { led_port=0x20; delay(1); // watchdog_timer(); } fade_3=512; fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); // watchdog_timer(); } fade_1=0; fade_2--; } watchdog_timer(); fade_2=512; fade_4=511; while(fade_2!=0&ee_temp==0x0c) { if(ee_temp!=0x0c) { fade_2=0; } for(fade_3=512;fade_3>fade_4;fade_3--) { led_port=0x08; delay(1); watchdog_timer(); } fade_3=512; fade_4--; watchdog_timer(); for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); watchdog_timer(); } fade_1=0; fade_2--; } watchdog_timer(); } void fade1() { // uchar i; uint fade_1,fade_2,fade_3,fade_4; fade_2=128; fade_4=127; while(fade_2!=0&ee_temp==0x08) { for(fade_3=128;fade_3>fade_4;fade_3--) { led_port=0x10; delay(1); } fade_3=128; fade_4--; for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x08; delay(1); } fade_1=0; fade_2--; if(ee_temp!=0x08) { fade_2=0; } } watchdog_timer(); fade_2=128; fade_4=127; while(fade_2!=0&ee_temp==0x08) { if(ee_temp!=0x08) { fade_2=0; } for(fade_3=128;fade_3>fade_4;fade_3--) { led_port=0x20; delay(1); } fade_3=128; fade_4--; for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x10; delay(1); } fade_1=0; fade_2--; } watchdog_timer(); fade_2=128; fade_4=127; while(fade_2!=0&ee_temp==0x08) { if(ee_temp!=0x08) { fade_2=0; } for(fade_3=128;fade_3>fade_4;fade_3--) { led_port=0x08; delay(1); } fade_3=128; fade_4--; for(fade_1=0;fade_1<fade_2;fade_1++) { led_port=0x20; delay(1); } fade_1=0; fade_2--; } watchdog_timer(); } void init() { led_port=0x00; /* led_r=1; delay_1ms(500); led_port=0x00; led_g=1; delay_1ms(500); led_port=0x00; led_b=1; delay_1ms(500); led_port=0x00; */ delay_1ms(2); WDT_CONTR=0x3f; delay_1ms(500); } //******************************** void main() { init(); Flag2=0; SP=0x60; //堆栈指针 EX0=1; //允许外部中断0,用于检测红外遥控器按键 EA=1; num=255; while(1) { calc(); } } //******************************************************************** /*------------------------外部中断0程序-------------------------*/ /*------------------主要用于处理红外遥控键值--------------------*/ void int0() interrupt 0 { uchar i; Flag2=0; /////// k=0; EX0=0; //检测到有效信号关中断，防止干扰 for(i=0;i<4;i++) { delay1000(); if(IR_RE==1){k=1;} //刚开始为9ms的引导码. } led_port=0x00; if(k==0) { IR_decode(); //如果接收到的是有效信号，则调用解码程序 if(date[3]>=0xe8) { if(date[3]<=0xfb) { temp1=date[3]; EEPROM_ERASE(0x2000); //STC_EEROM_0X2000 temp1 EEPROM_write(0x2000,temp1); EEPROM_read(0x2000); ee_temp1=ISP_DATA; ee_temp=ee_temp1&0x0f; /* temp=date[3]&0x0f; EEPROM_ERASE(0x2004); //STC_EEROM_0X2004 temp EEPROM_write(0x2004,temp); */ } else { EEPROM_read(0x2000); ee_temp1=ISP_DATA; ee_temp=ee_temp1&0x0f; } } delay2400(); delay2400(); delay2400(); delay_1ms(500); } EX0=1; //开外部中断，允许新的遥控按键 }
上传时间： 2016-07-02
上传用户：184890962
/*#include<reg52.h> #define uint unsigned int #define uchar unsigned char #define uchar unsigned char sbit K1=P3^4; sbit K2=P3^5; sbit ledr=P1^0; sbit ledg=P1^1; sbit ledb=P1^2; bit LEDDirection=0;//LED控制方向0：渐亮1：渐灭 char pwm=0; char pwmr=0; char scw=0;//中断记数 char tt=0; char n; void dealy(uint z); void Timer0Init(void) { TMOD=0x01; TH0=0xff; TL0=0x47; EX0=1; IT0=0; PX0=1; ET0=1; TR0=1; EA=1; } void main() { Timer0Init(); while(1){ if(K1==0) { dealy (1); if(K1==0) {TR0=1; ledr=0; dealy(5); TR0=0; } } if(K2==0) { dealy (1); if(K2==0) { while(1) { ledr=0; //亮 dealy(100-n*10); ledr=1; //熄 dealy(n*10); } } } } } void Time0Isr(void) interrupt 1 { // pwm=0; TH0=0xff; TL0=0x47; scw++; }*/ #include<reg52.h> #define uchar unsigned char bit LEDDirection=0; sbit P2_0=P1^0; sbit key1=P3^4; sbit key2=P3^5; sbit key3=P3^6; uchar zkb,i,t;// zkb指占空比 uchar pwm; void delay(uchar z) { uchar x,y; for(x=z;x>0;x--) for(y=110;y>0;y--); } void init() //初始化函数 { TMOD=0X01; TH0=(65536-1000)/256; TL0=(65536-1000)%256; EA=1; ET0=1; TR0=1; } void keyscan() //键盘扫描 { P3=0XFF; if(key1==0) { delay(5); if(key1==0) { while(!key1); if(zkb<9) { zkb++; } } } if(key2==0) { delay(5); if(key2==0) { while(!key2); if(zkb>0) { zkb--; } } } if(key3==0) {TR0=1; delay(5); if(key3==0) {while(!key3); if((zkb<=9)&&(0==LEDDirection)) { zkb++; if(zkb>9) { LEDDirection=1; zkb=9; } } if((zkb>=0 )&&(1==LEDDirection)) { zkb--; if(zkb<0 ) { LEDDirection=0; zkb=0 ; //dealy(3000); } } } //pwm=pwmr; } } void main() //主函数 { zkb=2; init(); while(1) { keyscan(); } } void time0(void) interrupt 1 //中断函数 { TH0=(65536-200)/256; TL0=(65536-200)%256; ++i; if(i>10) { i=0; }; if(i<=zkb) { P2_0=1; } else P2_0=0; } /*void time0(void) interrupt 0 //中断函数 { TH0=(65536-1000)/256; TL0=(65536-1000)%256; ++i; if(i>10) { i=0; }; if(i<=zkb) { P2_0=1; } else P2_0=0; }*/
标签： 调光
上传时间： 2016-07-02
上传用户：184890962
#include <stdlib.h> #include<stdio.h> #include <malloc.h> #define stack_init_size 100 #define stackincrement 10 typedef struct sqstack { int *base; int *top; int stacksize; } sqstack; int StackInit(sqstack *s) { s->base=(int *)malloc(stack_init_size *sizeof(int)); if(!s->base) return 0; s->top=s->base; s->stacksize=stack_init_size; return 1; } int Push(sqstack *s,int e) { if(s->top-s->base>=s->stacksize) { s->base=(int *)realloc(s->base,(s->stacksize+stackincrement)*sizeof(int)); if(!s->base) return 0; s->top=s->base+s->stacksize; s->stacksize+=stackincrement; } *(s->top++)=e; return e; } int Pop(sqstack *s,int e) { if(s->top==s->base) return 0; e=*--s->top; return e; } int stackempty(sqstack *s) { if(s->top==s->base) { return 1; } else { return 0; } } int conversion(sqstack *s) { int n,e=0,flag=0; printf("输入要转化的十进制数：\n"); scanf("%d",&n); printf("要转化为多少进制：\n"); scanf("%d",&flag); printf("将十进制数%d 转化为%d 进制是：\n",n,flag); while(n) { Push(s,n%flag); n=n/flag; } while(!stackempty(s)) { e=Pop(s,e); switch(e) { case 10: printf("A"); break; case 11: printf("B"); break; case 12: printf("C"); break; case 13: printf("D"); break; case 14: printf("E"); break; case 15: printf("F"); break; default: printf("%d",e); } } printf("\n"); return 0; } int main() { sqstack s; StackInit(&s); conversion(&s); return 0; }
上传时间： 2016-12-08
上传用户：爱你198
#include <malloc.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #define NULL 0 #define MaxSize 30 typedef struct athletestruct /*运动员*/ { char name[20]; int score; /*分数*/ int range; /**/ int item; /*项目*/ }ATH; typedef struct schoolstruct /*学校*/ { int count; /*编号*/ int serial; /**/ int menscore; /*男选手分数*/ int womenscore; /*女选手分数*/ int totalscore; /*总分*/ ATH athlete[MaxSize]; /**/ struct schoolstruct *next; }SCH; int nsc,msp,wsp; int ntsp; int i,j; int overgame; int serial,range; int n; SCH *head,*pfirst,*psecond; int *phead=NULL,*pafirst=NULL,*pasecond=NULL; void create(); void input () { char answer; head = (SCH *)malloc(sizeof(SCH)); /**/ head->next = NULL; pfirst = head; answer = 'y'; while ( answer == 'y' ) { Is_Game_DoMain: printf("\nGET Top 5 when odd\nGET Top 3 when even"); printf("\n输入运动项目序号 (x<=%d):",ntsp); scanf("%d",pafirst); overgame = *pafirst; if ( pafirst != phead ) { for ( pasecond = phead ; pasecond < pafirst ; pasecond ++ ) { if ( overgame == *pasecond ) { printf("\n这个项目已经存在请选择其他的数字\n"); goto Is_Game_DoMain; } } } pafirst = pafirst + 1; if ( overgame > ntsp ) { printf("\n项目不存在"); printf("\n请重新输入"); goto Is_Game_DoMain; } switch ( overgame%2 ) { case 0: n = 3;break; case 1: n = 5;break; } for ( i = 1 ; i <= n ; i++ ) { Is_Serial_DoMain: printf("\n输入序号 of the NO.%d (0<x<=%d): ",i,nsc); scanf("%d",&serial); if ( serial > nsc ) { printf("\n超过学校数目,请重新输入"); goto Is_Serial_DoMain; } if ( head->next == NULL ) { create(); } psecond = head->next ; while ( psecond != NULL ) { if ( psecond->serial == serial ) { pfirst = psecond; pfirst->count = pfirst->count + 1; goto Store_Data; } else { psecond = psecond->next; } } create(); Store_Data: pfirst->athlete[pfirst->count].item = overgame; pfirst->athlete[pfirst->count].range = i; pfirst->serial = serial; printf("Input name:) : "); scanf("%s",pfirst->athlete[pfirst->count].name); } printf("\n继续输入运动项目(y&n)？"); answer = getchar(); printf("\n"); } } void calculate() /**/ { pfirst = head->next; while ( pfirst->next != NULL ) { for (i=1;i<=pfirst->count;i++) { if ( pfirst->athlete[i].item % 2 == 0 ) { switch (pfirst->athlete[i].range) { case 1:pfirst->athlete[i].score = 5;break; case 2:pfirst->athlete[i].score = 3;break; case 3:pfirst->athlete[i].score = 2;break; } } else { switch (pfirst->athlete[i].range) { case 1:pfirst->athlete[i].score = 7;break; case 2:pfirst->athlete[i].score = 5;break; case 3:pfirst->athlete[i].score = 3;break; case 4:pfirst->athlete[i].score = 2;break; case 5:pfirst->athlete[i].score = 1;break; } } if ( pfirst->athlete[i].item <=msp ) { pfirst->menscore = pfirst->menscore + pfirst->athlete[i].score; } else { pfirst->womenscore = pfirst->womenscore + pfirst->athlete[i].score; } } pfirst->totalscore = pfirst->menscore + pfirst->womenscore; pfirst = pfirst->next; } } void output() { pfirst = head->next; psecond = head->next; while ( pfirst->next != NULL ) { // clrscr(); printf("\n第%d号学校的结果成绩:",pfirst->serial); printf("\n\n项目的数目\t学校的名字\t分数"); for (i=1;i<=ntsp;i++) { for (j=1;j<=pfirst->count;j++) { if ( pfirst->athlete[j].item == i ) { printf("\n %d\t\t\t\t\t\t%s\n %d",i,pfirst->athlete[j].name,pfirst->athlete[j].score);break; } } } printf("\n\n\n\t\t\t\t\t\t按任意建 进入下一页"); getchar(); pfirst = pfirst->next; } // clrscr(); printf("\n运动会结果:\n\n学校编号\t男运动员成绩\t女运动员成绩\t总分"); pfirst = head->next; while ( pfirst->next != NULL ) { printf("\n %d\t\t %d\t\t %d\t\t %d",pfirst->serial,pfirst->menscore,pfirst->womenscore,pfirst->totalscore); pfirst = pfirst->next; } printf("\n\n\n\t\t\t\t\t\t\t按任意建结束"); getchar(); } void create() { pfirst = (struct schoolstruct *)malloc(sizeof(struct schoolstruct)); pfirst->next = head->next ; head->next = pfirst ; pfirst->count = 1; pfirst->menscore = 0; pfirst->womenscore = 0; pfirst->totalscore = 0; } void Save() {FILE *fp; if((fp = fopen("school.dat","wb"))==NULL) {printf("can't open school.dat\n"); fclose(fp); return; } fwrite(pfirst,sizeof(SCH),10,fp); fclose(fp); printf("文件已经成功保存\n"); } void main() { system("cls"); printf("\n\t\t\t 运动会分数统计\n"); printf("输入学校数目 (x>= 5):"); scanf("%d",&nsc); printf("输入男选手的项目(x<=20):"); scanf("%d",&msp); printf("输入女选手项目(<=20):"); scanf("%d",&wsp); ntsp = msp + wsp; phead = (int *)calloc(ntsp,sizeof(int)); pafirst = phead; pasecond = phead; input(); calculate(); output(); Save(); }
标签： 源代码
上传时间： 2016-12-28
上传用户：150501
#include "string.h" #include "ctype.h" #include "stdio.h" search(char pd[]) {FILE *fp; int time=0,i=0,j=0,add[80],k=0,m; char *ch, str[900]; m=strlen(pd); if((fp=fopen("haha.txt","r"))==NULL) { printf("Cannot open this file\n"); exit(0); } for(;!feof(fp);i++) { str[i]=fgetc(fp); if(tolower(str[i])==tolower(pd[k])) {k++; if(k==m) if(!isalpha(i-m)&&!isalpha((str[i++]=fgetc(fp)))) { time++; add[j]=i-m+1; j++; k=0; } else k=0; } } if(time) { printf("The time is:%d\n",time); printf("The adders is:\n"); for(i=0;i
标签： 查询学会少年宫
上传时间： 2016-12-29
上传用户：767483511
#include "string.h" #include "ctype.h" #include "stdio.h" search(char pd[]) {FILE *fp; int time=0,i=0,j=0,add[80],k=0,m; char *ch, str[900]; m=strlen(pd); if((fp=fopen("haha.txt","r"))==NULL) { printf("Cannot open this file\n"); exit(0); } for(;!feof(fp);i++) { str[i]=fgetc(fp); if(tolower(str[i])==tolower(pd[k])) {k++; if(k==m) if(!isalpha(i-m)&&!isalpha((str[i++]=fgetc(fp)))) { time++; add[j]=i-m+1; j++; k=0; } else k=0; } } if(time) { printf("The time is:%d\n",time); printf("The adders is:\n"); for(i=0;i<j;i++) printf("%5d",add[i]); if(i%5==0) printf("\n"); getch(); fclose(fp); } else printf("Sorry!Cannot find the word(^_^)"); } main() { char pd[10],choose='y'; int flag=1; while(flag) {printf("In put the word you want to seqarch:"); scanf("%s",pd); search(strlwr(pd)); printf("\nWould you want to continue?(Y/N):"); getchar(); scanf("%c",&choose); if((tolower(choose))=='n') flag=0; else flag=1; } printf("Thanks for your using!Bye-bye!\n"); getch(); }
标签： 学生专用
上传时间： 2016-12-29
上传用户：767483511
#define TM1638_STB PORTC_Bit1 #define TM1638_CLK PORTC_Bit2 #define TM1638_DIO_IN DDRC_Bit3=0 #define TM1638_DIO_OUT DDRC_Bit3=1 #define TM1638_DIO PORTC_Bit3 #define TM1638_DIO_DataIN PINC_Bit3 void TM1638_Write(unsigned char DATA) //写数据函数 { unsigned char i; TM1638_DIO_OUT; for(i=0;i<8;i++) { TM1638_CLK=0; delay_us(1); if(DATA&0X01) TM1638_DIO=1; else TM1638_DIO=0; DATA>>=1; TM1638_CLK=1; delay_us(1); } } unsigned char TM1638_Read(void) //读数据函数 { unsigned char i; unsigned char temp=0; TM1638_DIO_IN; for(i=0;i<8;i++) { temp>>=1; TM1638_CLK=0; delay_us(1); if(TM1638_DIO_DataIN==1) temp|=0x80; TM1638_CLK=1; delay_us(1); } return temp; }
上传时间： 2017-01-12
上传用户：ds68
1．Describe a Θ(n lg n)-time algorithm that, given a set S of n integers and another integer x, determines whether or not there exist two elements in S whose sum is exactly x. (Implement exercise 2.3-7.) #include<stdio.h> #include<stdlib.h> void merge(int arr[],int low,int mid,int high){ int i,k; int *tmp=(int*)malloc((high-low+1)*sizeof(int)); int left_low=low; int left_high=mid; int right_low=mid+1; int right_high=high; for(k=0;left_low<=left_high&&right_low<=right_high;k++) { if(arr[left_low]<=arr[right_low]){ tmp[k]=arr[left_low++]; } else{ tmp[k]=arr[right_low++]; } } if(left_low<=left_high){ for(i=left_low;i<=left_high;i++){ tmp[k++]=arr[i]; } } if(right_low<=right_high){ for(i=right_low;i<=right_high;i++) tmp[k++]=arr[i]; } for(i=0;i<high-low+1;i++) arr[low+i]=tmp[i]; } void merge_sort(int a[],int p,int r){ int q; if(p<r){ q=(p+r)/2; merge_sort(a,p,q); merge_sort(a,q+1,r); merge(a,p,q,r); } } int main(){ int a[8]={3,5,8,6,4,1,1}; int i,j; int x=10; merge_sort(a,0,6); printf("after Merging-Sort:\n"); for(i=0;i<7;i++){ printf("%d",a[i]); } printf("\n"); i=0;j=6; do{ if(a[i]+a[j]==x){ printf("exist"); break; } if(a[i]+a[j]>x) j--; if(a[i]+a[j]<x) i++; }while(i<=j); if(i>j) printf("not exist"); system("pause"); return 0; }
上传时间： 2017-04-01
上传用户：糖儿水嘻嘻
