Most designers wish to utilize as much of a device as possible in order to enhance the overallproduct performance, or extend a feature set. As a design grows, inevitably it will exceed thearchitectural limitations of the device. Exactly why a design does not fit can sometimes bedifficult to determine. Programmable logic devices can be configured in almost an infinitenumber of ways. The same design may fit when you use certain implementation Switches, andfail to fit when using other Switches. This application note attempts to clarify the CPLD softwareimplementation (CPLDFit) options, as well as discuss implementation tips in CoolRunnerTM-IIdesigns in order to maximize CPLD utilization.
上传时间： 2014-01-11
上传用户：a471778
微电脑型RS-485显示电表（24*48mm/48*96mm） 特点： 5位数RS-485显示电表 显示范围-19999-99999位數 通訊协议Modbus RTU模式 宽范围交直流兩用電源設計 尺寸小,穩定性高 主要规格： 显示范围:-19999~99999 digit RS-485传输速度: 19200/9600/4800/2400 selective RS-485通讯位址: "01"-"FF" RS-485通讯协议: Modbus RTU mode 显示幕: Red high efficiency LEDs high 10.16 mm (0.4") (MMX-RS-11X) Red high efficiency LEDs high 20.32 mm (0.8") (MMX-RS-12X) Red high efficiency LEDs high 10.16 mm (0.4")x2 (MMX-RS-22X) 参数设定方式: Touch Switches 记忆方式: Non-volatile E²PROM memory 绝缘耐压能力: 2KVac/1 min. (input/power) 使用环境条件: 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2015-01-03
上传用户：feitian920
微电脑型单相交流集合式电表（单相二线系统） 特点： 精确度0.25%满刻度±1位数 可同时量测与显示交流电压,電流,頻率,瓦特,(功率因數/視在功率) 交流電壓,電流,瓦特皆為真正有效值(TRMS) 交流電流,瓦特之小數點可任意設定 瓦特單位W或KW可任意設定 CT比可任意設定(1至999) 輸入與輸出絕緣耐压 2仟伏特/1分鐘( 突波測試強度4仟伏特(1.2x50us) 數位RS-485界面 (Optional) 主要规格： 精确度: 0.1% F.S.±1 digit (Frequency) 0.25% F.S.±1 digit(ACA,ACV,Watt,VA) 0.25% F.S. ±0.25o(Power Factor) (-.300~+.300) 输入负载: <0.2VA (Voltage) <0.2VA (Current) 最大过载能力: Current related input: 3 x rated continuous 10 x rated 30 sec. 25 x rated 3sec. 50 x rated 1sec. Voltage related input: maximum 2 x rated continuous 过载显示: "doFL" 显示值范围: 0~600.0V(Voltage) 0~999.9Hz(Frequency)(<20% for voltage input) 0~19999 digit adjustable(Current,Watt,VA) 取样时间: 2 cycles/sec. RS-485通讯位址: "01"-"FF" RS-485传输速度: 19200/9600/4800/2400 selective RS-485通信协议: Modbus RTU mode 温度系数: 100ppm/℃ (0-50℃) 显示幕: Red high efficiency LEDs high 10.16 mm(0.4") 参数设定方式: Touch Switches 记忆型式: Non-volatile E²PROM memory 绝缘抗阻: >100Mohm with 500V DC 绝缘耐压能力: 2KVac/1 min. (input/output/power) 1600 Vdc (input/output) 突波测试: ANSI c37.90a/1974,DIN-IEC 255-4 impulse voltage 4KV(1.2x50us) 使用环境条件: 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2015-01-03
上传用户：几何公差
集合式直流电能表（小功率的） 特点： 精确度0.05%满刻度±1位数 可同时量测与显示/直流电压/电流/瓦特（千瓦）/瓦特小时（千瓦小时） 电压输入（DC0-99.99V/0-600.0V）自动变档功能 显示范围0-9999(电流/瓦特/千瓦),0至99999999(八位數瓦特小时)可任意规划 数位RS-485 界面 (Optional) 主要规格： 辅助电源消耗功率：＜0.35VA(DC12V/DC24V) ＜0.5VA（DC48V） ＜1.5VA（AC90-240V(50/60Hz)） 精确度: 0.05% F.S. ±1 digit (23 ±5℃) 输入范围：Auto range(DC0-99.99V/0-600.0V(DC voltage)) 输入抗阻：＞5MΩ（DC voltage） 取样时间：10 cycles/second(total) 过载显示: " doFL " 显示值范围: 0-9999 digit（DCA/W(KW)） 0-9999999.999 digit(WH/(KWH)) RS-485传输速度: 19200/9600/4800/2400 selective RS-485通讯位址: "01"-"FF"（0-255） RS-485通信协议: Modbus RTU mode 温度系数: 50ppm/℃ (0-50℃) 显示幕:Bight Red LEDs high 10.16 mm(0.4") 参数设定方式: Touch Switches 记忆方式: Non-volatile E²PROM memory 绝缘耐压能力:2KVac/1min.(input/output)（RS-485(Isolating)） 1600 Vdc (input/output) （RS-485(Isolating)） 使用环境条件: 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2013-11-20
上传用户：s363994250
Spartan 3 Digilent Demo:This demo drives the perphrials on the Spartan 3 board. This drives a simple pattern to the VGA port, connects the Switches to the LEDs, buttons to each anode of the seven segment decoder. The seven segment decoder has a simple counter running on it, and when SW0 is in the up position the seven segment decoder will display scan codes from the PS2 port. This demo how ever does not drive the RS-232 port or the memory. This is a simple design done entirely VHDL not microblaze.
标签： Spartan drives This perphrials
上传时间： 2014-05-29
上传用户：SimonQQ
To increase simulation speed, ModelSim® can apply a variety of optimizations to your design. These include, but are not limited to, mergingprocesses, pulling constants out of loops, clock suppression, and signal collapsing. You control the level of optimization by specifying certain Switches when you invoke the compiler.
标签： optimizations simulation ModelSim increase
上传时间： 2013-12-25
上传用户：pkkkkp
This directory contains example ADSPBF535 code, written in assembly, that changes the frequency and voltage using the push button Switches on the board.
标签： directory frequency contains assembly
上传时间： 2014-01-03
上传用户：evil
The first task at hand is to set up the endpoints appropriately for this example. The following code Switches the CPU clock speed to 48 MHz (since at power-on default it is 12 MHz), and sets up EP2 as a Bulk OUT endpoint, 4x buffered of size 512, and EP6 as a Bulk IN endpoint, also 4x buffered of size 512. This set-up utilizes the maximum allotted 4-KB FIFO space. It also sets up the FIFOs for manual mode, word-wide operation, and goes through a FIFO reset and arming sequence to ensure that they are ready for data operations
标签： appropriately The endpoints following
上传时间： 2013-12-02
上传用户：dianxin61
Flex chip implementation File: UP2FLEX JTAG jumper settings: down, down, up, up Input: Reset - FLEX_PB1 Input n - FLEX_SW Switches 1 to 8 Output: Countdown - two 7-segment LEDs. Done light - decimal point on Digit1. Operation: Setup the binary input n number. Press the Reset switch. See the countdown from n down to 0 on the 7-segment LEDs. Done light lit when program terminates.
标签： down implementation settings UP2FLEX
上传时间： 2014-01-21
上传用户：sclyutian
这个Matlab程序包，涵盖了很多著名的电力电子，包含的电力设备有：rectifier,ac controllers,convertors,Switches等等。涉及整流器,交流控制器,变换器。
上传时间： 2014-01-22
上传用户：lindor
