针对嵌入式机器视觉系统向独立化、智能化发展的要求，介绍了一种嵌入式视觉系统--智能相机。基于对智能相机体系结构、组成模块和图像采集、传输和处理技术的分析，对国内外的几款智能相机进行比较。综合技术发展现状，提出基于FPGA+DSP模式的硬件平台，并提出智能相机的发展方向。分析结果表明，该系统设计可以实现脱离PC运行，完成图像获取与分析，并作出相应输出。 Abstract: This paper introduced an embedded vision system-intelligent camera ，which was for embedded machine vision systems to an independent and intelligent development requirements. Intelligent camera architecture， component modules and image acquisition， transmission and processing technology were analyzed. After comparing integrated technology development of several intelligent cameras at home and abroad， the paper proposed the hardware platform based on FPGA+DSP models and made clear direction of development of intelligent cameras. On the analysis of the design， the results indicate that the system can run from the PC independently to complete the image acquisition and analysis and give a corresponding output.
上传时间： 2013-10-24
上传用户：bvdragon
Prakash Rashinkar has over 15 years experience in system design and verificationof embedded systems for communication satellites, launch vehicles and spacecraftground systems, high-performance computing, switching, multimedia, and wirelessapplications. Prakash graduated with an MSEE from Regional Engineering College,Warangal, in India. He lead the team that was responsible for delivering themethodologies for SOC verification at Cadence Design Systems. Prakash is anactive member of the VSIA Functional Verification DWG. He is currently Architectin the Vertical Markets and Design Environments Group at Cadence.
上传时间： 2014-01-24
上传用户：xinhaoshan2016
USB接口控制器参考设计,xilinx提供VHDL代码 usb xilinx vhdl ; This program is free software; you can redistribute it and/or modify ; it under the terms of the GNU General Public License as published by ; the Free Software Foundation; either version 2 of the License, or ; (at your option) any later version. ; ; This program is distributed in the hope that it will be useful, ; but WITHOUT ANY WARRANTY; without even the implied warranty of ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ; GNU General Public License for more details. ; ; You should have received a copy of the GNU General Public License ; along with this program; if not, write to the Free Software ; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
上传时间： 2013-10-12
上传用户：windgate
ref-sdr-sdram-vhdl代码 SDR SDRAM Controller v1.1 readme.txt This readme file for the SDR SDRAM Controller includes information that was not incorporated into the SDR SDRAM Controller White Paper v1.1. The PLL is targeted at APEX(TM) devices. Please regenerate for your chosen architecture. Last updated September, 2002 Copyright ?2002 Altera Corporation. All rights reserved.
上传时间： 2013-11-13
上传用户：takako_yang
要想实现雨量RTU系统的通信功能，首先要实现系统通信模块的通信功能，因此系统中通信模块的设计和功能实现是系统的关键部分。针对这一要求，围绕SIM900A芯片和有效SIM电话卡完成系统通信模块的硬件设计，软件方面使用AT指令集以GSM和GPRS通信方式通过串口调试工具实现系统的通信功能，本文主要介绍GSM短消息方式实现系统的通信功能。通过实验证明，虽然GSM短消息具有短消息长度受限和存在延时的缺陷，但是本文设计的雨量RTU系统通信的成功率和实时性可以达到实际应用的需要，符合设计的要求。
上传时间： 2014-12-29
上传用户：zhishenglu
针对电力系统变压器监控点分散、条件恶劣且不具备一般的网络接入条件的特殊情况，为了便于远程监控，提出并实现了基于GPRS模块的远程图像监控系统通信电路设计。G24通信模块及其外围电路为其主要硬件电路设计部分，以AT指令为其主要软件设计部分。该实际应用表明，该系统具有操作简便、通信可靠的特点，达到了设计要求。
上传时间： 2013-11-10
上传用户：hasan2015
基于对处于偏远地区的光伏发电基站电源运行情况进行远程控制和检测的目的，本系统设计了具有针对性的监测系统，基站电源发电的电压、电流值每5 s钟采集一次，通过GPRS模块无线高速传输到总站计算机进行检测和控制。进行串口通信实时数据采集、存储、查询，并完成对上位机串行口接收数据设置、上位机对下位机工作情况的检测和系统功能的设定。探讨了GPRS模块进行数据传输的过程，MC35i驱动及AT指令的编写和数据传输协议的制定。在大量的实验的基础上，采集到日光强度改变时基站电源运行情况的数据，为提高太阳能电池的利用率提供了实践依据。
上传时间： 2013-11-06
上传用户：破晓sunshine
该对讲机模块是一款性价比极高的全集成对讲机Module，内置高性能射频收发芯片、微控制器以及射频功放(PA)。外部控制器通过标准的异步串行接口（RS232）设置模块的参数、功能，并可通过串口AT指令控制整个模块的收发。 该模块体积小、集成度高、性能稳定、应用灵活，且符合世界大多数国家对讲机标准，很容易通过CE/FCC等认证；采用此模块可做成小型对讲机，也可将模块嵌入到其它手持终端设备以实现无线对讲功能。
上传时间： 2013-11-25
上传用户：caoyuanyuan1818
GPRS模块的AT指令集
上传时间： 2013-11-16
上传用户：wincoder
针对飞行模拟器座舱数据采集的复杂性，设计了一种基于以太网分布式的数据采集控制系统，该系统是RCM5700微处理器模块上的以太网应用。在系统的基础上具体讨论了PoE技术的应用，在传输数据的网线上同时提供电流，提出并实现了一种包括辅助电源在内的完整可靠的PoE供电方案。设计采用美国国家半导体的LM5073和LM5576并根据不同的负载情况，进行稳定可靠的电压转换，以满足数据采集电路的要求。实验结果表明：该设计稳定可靠，满足低于13 W的采集节点供电要求，提高了模拟器信号采集系统的通用性和标准化程度，避免了以往数据采集节点单独繁琐的电源设计。 Abstract: Aiming at the complexity of large avion simulation and controlling，the simulator cabin distribute data collecting and control system was designed. This system is the application of RCM5700 on Ethernet. Based on this system，PoE technique that makes Ethernet can also provide power were expounded with emphasis and included FAUX design the PoE resolution was realized. To achieve the requirement of this system，LM5073 and LM5576 were used to DC-DC switch. From the data of experiment，the design filled the requirement of power-need of node whose power was lower than 13W. The application of the technique can advance the degree of simulation data collections currency and standardization and avoid designing additional power system.
上传时间： 2013-11-09
上传用户：xyipie
