This small utility helps to generate seven segment display codes for different I/O connections. For example, AVR/PIC Port A.0 -> D Segment Port A.1 -> B Segment .... Also it can generate Common Cathode or Common Anode table codes.. I Coded it long time ago. I Hope help someone. Thank you
标签： connections different generate display
上传时间： 2014-01-17
上传用户：开怀常笑
Wi-Fi pollution, or an excessive number of access points in the area, especially on the same or neighboring channel, can prevent access and interfere with the use of other access points by others, caused by overlapping channels in the 802.11g/b spectrum
标签： especially pollution excessive the
上传时间： 2017-07-29
上传用户：我们的船长
Abstract-In this paper, simple autonomous chaotic circuits coupled by resistors are investigated. By carrying out computer calculations and circuit experiments, irregular self-switching phenomenon of three spatial patterns characterized by the phase states of quasi-synchronization of chaos can be observed from only four simple chaotic circuits. This is the same phenomenon as chaotic wandering of spatial patterns observed very often from systems with a large number of degrees of freedom. Namely, one of spatial-temporal chaos observed from systems of large size can be also generated in the proposed system consisting of only four chaotic circuits. A six subcircuits case and a coupled chaotic circuits networks are also studied, and such systems are confirmed to produce more complicated spatio-temporal phenomena.
标签： investigated Abstract-In autonomous resistors
上传时间： 2014-06-09
上传用户：h886166
Computing and the way people use C for doing it keeps changing as years go by. So overwhelming has been the response to all the previous editions of “Let Us C” that I have now decided that each year I would come up with a new edition of it so that I can keep the readers abreast with the way C is being used at that point in time.
标签： overwhelming Computing changing people
上传时间： 2013-12-23
上传用户：epson850
GRE 数学圣经，下面是详细的英文介绍： Comprehensive Prep for GRE Math Every year, students pay $1,000 and more to test prep companies to prepare for the math section of the GRE. Now you can get the same preparation in a book. Although the GRE math section is difficult, it is very learnable. GRE Math Bible presents a thorough analysis of GRE math and introduces numerous analytic techniques that will help you immensely, not only on the GRE but in graduate school as well.
标签： GRE Math 数学
上传时间： 2015-08-22
上传用户：东大寺的
/* ********************************************************************************************************* * uC/TCP-IP V2 * The Embedded TCP/IP Suite * * (c) Copyright 2003-2010; Micrium, Inc.; Weston, FL * * All rights reserved. Protected by international copyright laws. * * uC/TCP-IP is provided in source form to registered licensees ONLY. It is * illegal to distribute this source code to any third party unless you receive * written permission by an authorized Micrium representative. Knowledge of * the source code may NOT be used to develop a similar product. * * Please help us continue to provide the Embedded community with the finest * software available. Your honesty is greatly appreciated. * * You can contact us at www.micrium.com. ********************************************************************************************************* */ /* ********************************************************************************************************* * * NETWORK TCP LAYER * (TRANSMISSION CONTROL PROTOCOL) * * Filename : net_tcp.h * Version : V2.10 * Programmer(s) : ITJ ********************************************************************************************************* * Note(s) : (1) Supports Transmission Control Protocol as described in RFC #793 with the following * restrictions/constraints : * * (a) TCP Security & Precedence NOT supported RFC # 793, Section 3.6 * * (b) TCP Urgent Data NOT supported RFC # 793, Section 3.7 * 'The Communication of * Urgent Information' * * (c) The following TCP options NOT supported : * * (1) Window Scale RFC #1072, Section 2 * RFC #1323, Section 2 * (2) Selective Acknowledgement (SACK) RFC #1072, Section 3 * RFC #2018 * RFC #2883 * (3) TCP Echo RFC #1072, Section 4 * (4) Timestamp RFC #1323, Section 3.2 * (5) Protection Against Wrapped Sequences (PAWS) RFC #1323, Section 4 * * (d) #### IP-Options-to-TCP-Connection RFC #1122, Section 4.2.3.8 * Handling NOT supported * * (e) #### ICMP-Error-Message-to-TCP-Connection RFC #1122, Section 4.2.3.9 * Handling NOT currently supported * * (2) TCP Layer assumes/requires Network Socket Layer (see 'net_sock.h MODULE Note #1a2'). ********************************************************************************************************* */ /*$PAGE*/ /* ********************************************************************************************************* * MODULE * * Note(s) : (1) TCP Layer module is NOT required for UDP-to-Application API configuration. * * See also 'net_cfg.h TRANSPORT LAYER CONFIGURATION' * & 'net_cfg.h USER DATAGRAM PROTOCOL LAYER CONFIGURATION'. * * See also 'net_tcp.h Note #2'. * * (2) The following TCP-module-present configuration value MUST be pre-#define'd in * 'net_cfg_net.h' PRIOR to all other network modules that require TCP Layer * configuration (see 'net_cfg_net.h TCP LAYER CONFIGURATION Note #2b') : * * NET_TCP_MODULE_PRESENT ********************************************************************************************************* */ #ifdef NET_TCP_MODULE_PRESENT /* See Note #2. */ /* ********************************************************************************************************* * EXTERNS ********************************************************************************************************* */ #if ((defined(NET_TCP_MODULE)) && \ (defined(NET_GLOBALS_EXT))) #define NET_TCP_EXT #else #define NET_TCP_EXT extern #endif /*$PAGE*/ /* ********************************************************************************************************* * DEFINES ********************************************************************************************************* */ /* ********************************************************************************************************* * TCP HEADER DEFINES * * Note(s) : (1) The following TCP value MUST be pre-#define'd in 'net_def.h' PRIOR to 'net_buf.h' so that * the Network Buffer Module can configure maximum buffer header size (see 'net_def.h TCP * LAYER DEFINES' & 'net_buf.h NETWORK BUFFER INDEX & SIZE DEFINES Note #1') : * * (a) NET_TCP_HDR_SIZE_MAX 60 (NET_TCP_HDR_LEN_MAX * * NET_TCP_HDR_LEN_WORD_SIZE) * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_LEN_MASK 0xF000u #define NET_TCP_HDR_LEN_SHIFT 12u #define NET_TCP_HDR_LEN_NONE 0u #define NET_TCP_HDR_LEN_MIN 5u #define NET_TCP_HDR_LEN_MAX 15u #define NET_TCP_HDR_LEN_WORD_SIZE CPU_WORD_SIZE_32 #define NET_TCP_HDR_SIZE_MIN (NET_TCP_HDR_LEN_MIN * NET_TCP_HDR_LEN_WORD_SIZE) #if 0 /* See Note #1a. */ #define NET_TCP_HDR_SIZE_MAX (NET_TCP_HDR_LEN_MAX * NET_TCP_HDR_LEN_WORD_SIZE) #endif #define NET_TCP_HDR_SIZE_TOT_MIN (NET_IP_HDR_SIZE_TOT_MIN + NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_SIZE_TOT_MAX (NET_IP_HDR_SIZE_TOT_MAX + NET_TCP_HDR_SIZE_MAX) #define NET_TCP_PSEUDO_HDR_SIZE 12u /* = sizeof(NET_TCP_PSEUDO_HDR) */ #define NET_TCP_PORT_NBR_RESERVED NET_PORT_NBR_RESERVED #define NET_TCP_PORT_NBR_NONE NET_TCP_PORT_NBR_RESERVED #define NET_TCP_HDR_URG_PTR_NONE 0x0000u /* See Note #2. */ /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER FLAG DEFINES * * Note(s) : (1) See 'TCP HEADER Note #2' for flag fields. * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_FLAG_MASK 0x0FFFu #define NET_TCP_HDR_FLAG_NONE DEF_BIT_NONE #define NET_TCP_HDR_FLAG_RESERVED 0x0FE0u /* MUST be '0'. */ #define NET_TCP_HDR_FLAG_URGENT DEF_BIT_05 /* See Note #2. */ #define NET_TCP_HDR_FLAG_ACK DEF_BIT_04 #define NET_TCP_HDR_FLAG_PUSH DEF_BIT_03 #define NET_TCP_HDR_FLAG_RESET DEF_BIT_02 #define NET_TCP_HDR_FLAG_SYNC DEF_BIT_01 #define NET_TCP_HDR_FLAG_FIN DEF_BIT_00 #define NET_TCP_HDR_FLAG_CLOSE NET_TCP_HDR_FLAG_FIN /* ********************************************************************************************************* * TCP FLAG DEFINES ********************************************************************************************************* */ /* ------------------ NET TCP FLAGS ------------------- */ #define NET_TCP_FLAG_NONE DEF_BIT_NONE #define NET_TCP_FLAG_USED DEF_BIT_00 /* TCP conn cur used; i.e. NOT in free TCP conn pool. */ /* ------------------ TCP TX FLAGS ------------------- */ /* TCP tx flags copied from TCP hdr flags. */ #define NET_TCP_FLAG_TX_FIN NET_TCP_HDR_FLAG_FIN #define NET_TCP_FLAG_TX_CLOSE NET_TCP_FLAG_TX_FIN #define NET_TCP_FLAG_TX_SYNC NET_TCP_HDR_FLAG_SYNC #define NET_TCP_FLAG_TX_RESET NET_TCP_HDR_FLAG_RESET #define NET_TCP_FLAG_TX_PUSH NET_TCP_HDR_FLAG_PUSH #define NET_TCP_FLAG_TX_ACK NET_TCP_HDR_FLAG_ACK #define NET_TCP_FLAG_TX_URGENT NET_TCP_HDR_FLAG_URGENT #define NET_TCP_FLAG_TX_BLOCK DEF_BIT_07 /* ------------------ TCP RX FLAGS ------------------- */ #define NET_TCP_FLAG_RX_DATA_PEEK DEF_BIT_08 #define NET_TCP_FLAG_RX_BLOCK DEF_BIT_15 /*$PAGE*/ /* ********************************************************************************************************* * TCP TYPE DEFINES * * Note(s) : (1) NET_TCP_TYPE_&&& #define values specifically chosen as ASCII representations of the TCP * types. Memory displays of TCP types will display with their chosen ASCII names. ********************************************************************************************************* */ /* ------------------ NET TCP TYPES ------------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x20504354u /* "TCP " in ASCII. */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x43542050u /* "TCP " in ASCII. */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #endif #endif /* ********************************************************************************************************* * TCP SEQUENCE NUMBER DEFINES * * Note(s) : (1) TCP initial transmit sequence number is incremented by a fixed value, preferably a large * prime value or a large value with multiple unique factors. * * (a) One reasonable TCP initial transmit sequence number increment value example : * * 65527 = 37 * 23 * 11 * 7 * * * #### NET_TCP_TX_SEQ_NBR_CTR_INC could be developer-configured in 'net_cfg.h'. * * See also 'NET_TCP_TX_GET_SEQ_NBR() Notes #1b2 & #1c2'. ********************************************************************************************************* */ #define NET_TCP_SEQ_NBR_NONE 0u #define NET_TCP_ACK_NBR_NONE NET_TCP_SEQ_NBR_NONE #define NET_TCP_TX_SEQ_NBR_CTR_INC 65527u /* See Note #1. */ #define NET_TCP_ACK_NBR_DUP_WIN_SIZE_SCALE 4 /*$PAGE*/ /* ********************************************************************************************************* * TCP DATA/TOTAL LENGTH DEFINES * * Note(s) : (1) (a) TCP total length #define's (NET_TCP_TOT_LEN) relate to the total size of a complete * TCP packet, including the packet's TCP header. Note that a complete TCP packet MAY * be fragmented in multiple Internet Protocol packets. * * (b) TCP data length #define's (NET_TCP_DATA_LEN) relate to the data size of a complete * TCP packet, equal to the total TCP packet length minus its TCP header size. Note * that a complete TCP packet MAY be fragmented in multiple Internet Protocol packets. ********************************************************************************************************* */ /* See Notes #1a & #1b. */ #define NET_TCP_DATA_LEN_MIN 0u #define NET_TCP_TOT_LEN_MIN (NET_TCP_HDR_SIZE_MIN + NET_TCP_DATA_LEN_MIN) #define NET_TCP_TOT_LEN_MAX (NET_IP_TOT_LEN_MAX - NET_IP_HDR_SIZE_MIN ) #define NET_TCP_DATA_LEN_MAX (NET_TCP_TOT_LEN_MAX - NET_TCP_HDR_SIZE_MIN) /*$PAGE*/ /* ********************************************************************************************************* * TCP SEGMENT SIZE DEFINES * * Note(s) : (1) (a) RFC # 879, Section 3 states that the TCP Maximum Segment Size "counts only * data octets in the segment, ... not the TCP header or the IP header". * * (b) RFC #1122, Section 4.2.2.6 requires that : * * (1) "The MSS value to be sent in an MSS option must be less than or equal to * * (A) MMS_R - 20 * * where MMS_R is the maximum size for a transport-layer message that can * be received." * * (2) "If an MSS option is not received at connection setup, TCP MUST assume a * default send MSS of 536 (576 - 40)." * * See also 'net_ip.h IP DATA/TOTAL LENGTH DEFINES Note #1'. ********************************************************************************************************* */ /* See Note #1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT (NET_IP_MAX_DATAGRAM_SIZE_DFLT - NET_IP_HDR_SIZE_MIN - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_MAX_SEG_SIZE_DFLT_RX NET_TCP_DATA_LEN_MAX /* See Note #1b1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT_TX NET_TCP_MAX_SEG_SIZE_DFLT /* See Note #1b2. */ #define NET_TCP_MAX_SEG_SIZE_NONE 0u #define NET_TCP_MAX_SEG_SIZE_MIN NET_TCP_MAX_SEG_SIZE_DFLT #define NET_TCP_MAX_SEG_SIZE_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_MIN NET_TCP_DATA_LEN_MIN #define NET_TCP_SEG_LEN_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_SYNC 1u #define NET_TCP_SEG_LEN_FIN 1u #define NET_TCP_SEG_LEN_CLOSE NET_TCP_SEG_LEN_FIN #define NET_TCP_SEG_LEN_ACK 0u #define NET_TCP_SEG_LEN_RESET 0u #define NET_TCP_SEG_LEN_PROBE 0u #define NET_TCP_DATA_LEN_TX_SYNC 0u #define NET_TCP_DATA_LEN_TX_FIN 0u #define NET_TCP_DATA_LEN_TX_CLOSE NET_TCP_DATA_LEN_TX_FIN #define NET_TCP_DATA_LEN_TX_ACK 0u #define NET_TCP_DATA_LEN_TX_PROBE_NO_DATA 0u #define NET_TCP_DATA_LEN_TX_PROBE_DATA 1u #define NET_TCP_DATA_LEN_TX_RESET 0u #define NET_TCP_TX_PROBE_DATA 0x00u /* ********************************************************************************************************* * TCP WINDOW SIZE DEFINES * * Note(s) : (1) Although NO RFC specifies the absolute minimum TCP connection window size value allowed, * RFC #793, Section 3.7 'Data Communication : Managing the Window' states that for "the * window ... there is an assumption that this is related to the currently available data * buffer space available for this connection". ********************************************************************************************************* */ #define NET_TCP_WIN_SIZE_NONE 0u #define NET_TCP_WIN_SIZE_MIN NET_TCP_MAX_SEG_SIZE_MIN #define NET_TCP_WIN_SIZE_MAX DEF_INT_16U_MAX_VAL /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER OPTIONS DEFINES * * Note(s) : (1) See the following RFC's for TCP options summary : * * (a) RFC # 793, Section 3.1 'Header Format : Options' * (b) RFC #1122; Sections 4.2.2.5, 4.2.2.6 * * (2) TCP option types are encoded in the first octet for each TCP option as follows : * * -------- * | TYPE | * -------- * * The TCP option type value determines the TCP option format : * * (a) The following TCP option types are single-octet TCP options -- i.e. the option type * octet is the ONLY octet for the TCP option. * * (1) TYPE = 0 End of Options List * (2) TYPE = 1 No Operation * * * (b) All other TCP options MUST be multi-octet TCP options (see RFC #1122, Section 4.2.2.5) : * * ------------------------------ * | TYPE | LEN | TCP OPT | * ------------------------------ * * where * TYPE Indicates the specific TCP option type * LEN Indicates the total TCP option length, in octets, including * the option type & the option length octets * TCP OPT Additional TCP option octets, if any, that contain the remaining * TCP option information * * The following TCP option types are multi-octet TCP options where the option's second * octet specify the total TCP option length, in octets, including the option type & the * option length octets : * * (1) TYPE = 2 Maximum Segment Size See RFC # 793, Section 3.1 'Header Format : * Options : Maximum Segment Size'; * RFC #1122, Section 4.2.2.6; * RFC # 879, Section 3 * * (2) TYPE = 3 Window Scale See 'net_tcp.h Note #1c1' * (3) TYPE = 4 SACK Allowed See 'net_tcp.h Note #1c2' * (4) TYPE = 5 SACK Option See 'net_tcp.h Note #1c2' * (5) TYPE = 6 Echo Request See 'net_tcp.h Note #1c3' * (6) TYPE = 7 Echo Reply See 'net_tcp.h Note #1c3' * (7) TYPE = 8 Timestamp See 'net_tcp.h Note #1c4' * * (3) TCP header allows for a maximum option list length of 40 octets : * * NET_TCP_HDR_OPT_SIZE_MAX = NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN * * = 60 - 20 * * = 40 * * (4) 'NET_TCP_OPT_SIZE' MUST be pre-defined PRIOR to all definitions that require TCP option * size data type. ********************************************************************************************************* */ /*$PAGE*/ #define NET_TCP_HDR_OPT_END_LIST 0u #define NET_TCP_HDR_OPT_NOP 1u #define NET_TCP_HDR_OPT_MAX_SEG_SIZE 2u #define NET_TCP_HDR_OPT_WIN_SCALE 3u #define NET_TCP_HDR_OPT_SACK_PERMIT 4u #define NET_TCP_HDR_OPT_SACK 5u #define NET_TCP_HDR_OPT_ECHO_REQ 6u #define NET_TCP_HDR_OPT_ECHO_REPLY 7u #define NET_TCP_HDR_OPT_TS 8u #define NET_TCP_HDR_OPT_PAD NET_TCP_HDR_OPT_END_LIST #define NET_TCP_HDR_OPT_LEN_END_LIST 1u #define NET_TCP_HDR_OPT_LEN_NOP 1u #define NET_TCP_HDR_OPT_LEN_MAX_SEG_SIZE 4u #define NET_TCP_HDR_OPT_LEN_WIN_SCALE 3u #define NET_TCP_HDR_OPT_LEN_SACK_PERMIT 2u #define NET_TCP_HDR_OPT_LEN_ECHO_REQ 6u #define NET_TCP_HDR_OPT_LEN_ECHO_REPLY 6u #define NET_TCP_HDR_OPT_LEN_TS 10u #define NET_TCP_HDR_OPT_LEN_SACK_MIN 6u #define NET_TCP_HDR_OPT_LEN_SACK_MAX 38u #define NET_TCP_HDR_OPT_LEN_MIN 1u #define NET_TCP_HDR_OPT_LEN_MIN_LEN 2u #define NET_TCP_HDR_OPT_LEN_MAX 38u typedef CPU_INT32U NET_TCP_OPT_SIZE; /* TCP opt size data type (see Note #4). */ #define NET_TCP_HDR_OPT_SIZE_WORD (sizeof(NET_TCP_OPT_SIZE)) #define NET_TCP_HDR_OPT_SIZE_MAX (NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_OPT_NBR_MIN 0u #define NET_TCP_HDR_OPT_NBR_MAX (NET_TCP_HDR_OPT_SIZE_MAX / NET_TCP_HDR_OPT_SIZE_WORD) #define NET_TCP_HDR_OPT_IX NET_TCP_HDR_SIZE_MIN /*$PAGE*/ /* ********************************************************************************************************* * TCP OPTION CONFIGURATION TYPE DEFINES * * Note(s) : (1) NET_TCP_OPT_CFG_TYPE_&&& #define values specifically chosen as ASCII representations of * the TCP option configuration types. Memory displays of TCP option configuration buffers * will display the TCP option configuration TYPEs with their chosen ASCII names. ********************************************************************************************************* */ /* ---------------- TCP OPT CFG TYPES ----------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_OPT_CFG_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x2053534Du /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x204E4957u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x504B4353u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x4B434153u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x51455245u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4F484345u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x20205354u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x534D2053u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x4957204Eu /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x4353504Bu /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x41534B43u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x52455145u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x43454F48u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x53542020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #endif #endif /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION TIMEOUT DEFINES * * Note(s) : (1) (a) (1) RFC #1122, Section 4.2.2.13 'DISCUSSION' states that "the graceful close algorithm * of TCP requires that the connection state remain defined on (at least) one end of * the connection, for a timeout period of 2xMSL ... During this period, the (remote * socket, local socket) pair that defines the connection is busy and cannot be reused". * * (2) The following sections reiterate that the TIME-WAIT state timeout scalar is two * maximum segment lifetimes (2 MSL) : * * (A) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check Sequence Number : TIME-WAIT STATE' * (B) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check FIN Bit : TIME-WAIT STATE' * * (b) (1) RFC #793, Section 3.3 'Sequence Numbers : Knowing When to Keep Quiet' states that * "the Maximum Segment Lifetime (MSL) is ... to be 2 minutes. This is an engineering * choice, and may be changed if experience indicates it is desirable to do so". * * (2) Microsoft Corporation's Windows XP defaults MSL to 15 seconds. ********************************************************************************************************* */ /* Max seg timeout (see Note #1b) : */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC ( 0u ) /* ... min = 0 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC ( 2u * DEF_TIME_NBR_SEC_PER_MIN) /* ... max = 2 minutes */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_DFLT_SEC ( 15u ) /* ... dflt = 15 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_SCALAR 2u /* ... scalar (see Note #1a). */ #define NET_TCP_CONN_TIMEOUT_CONN_DFLT_SEC (120u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt conn timeout = 120 minutes */ #define NET_TCP_CONN_TIMEOUT_USER_DFLT_SEC ( 30u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt user timeout = 30 minutes */ /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION STATES * * Note(s) : (1) See the following RFC's for TCP state machine summary : * * (a) RFC # 793; Sections 3.2, 3.4, 3.5, 3.9 * (b) RFC #1122; Sections 4.2.2.8, 4.2.2.10, 4.2.2.11, 4.2.2.13, 4.2.2.18, 4.2.2.20 * * (2) (a) #### Additional closing-data-available state used for closing connections to allow the * application layer to receive any remaining data. * * See also 'net_tcp.c NetTCP_RxPktConnHandlerFinWait1() Note #2f5A2', * 'net_tcp.c NetTCP_RxPktConnHandlerFinWait2() Note #2f5B', * 'net_tcp.c NetTCP_RxPktConnHandlerClosing() Note #2d2B2a1B', * & 'net_tcp.c NetTCP_RxPktConnHandlerLastAck() Note #2d2A1b'. ********************************************************************************************************* */ #define NET_TCP_CONN_STATE_NONE 0u #define NET_TCP_CONN_STATE_FREE 1u #define NET_TCP_CONN_STATE_CLOSED 10u #define NET_TCP_CONN_STATE_LISTEN 20u #define NET_TCP_CONN_STATE_SYNC_RXD 30u #define NET_TCP_CONN_STATE_SYNC_RXD_PASSIVE 31u #define NET_TCP_CONN_STATE_SYNC_RXD_ACTIVE 32u #define NET_TCP_CONN_STATE_SYNC_TXD 35u #define NET_TCP_CONN_STATE_CONN 40u #define NET_TCP_CONN_STATE_FIN_WAIT_1 50u #define NET_TCP_CONN_STATE_FIN_WAIT_2 51u #define NET_TCP_CONN_STATE_CLOSING 52u #define NET_TCP_CONN_STATE_TIME_WAIT 53u #define NET_TCP_CONN_STATE_CLOSE_WAIT 55u #define NET_TCP_CONN_STATE_LAST_ACK 56u #define NET_TCP_CONN_STATE_CLOSING_DATA_AVAIL 59u /* See Note #2a. */ /* ********************************************************************************************************* * TCP CONNECTION QUEUE STATES ********************************************************************************************************* */ #define NET_TCP_RX_Q_STATE_NONE 0u #define NET_TCP_RX_Q_STATE_CLOSED 100u #define NET_TCP_RX_Q_STATE_CLOSING 101u #define NET_TCP_RX_Q_STATE_SYNC 110u #define NET_TCP_RX_Q_STATE_CONN 111u #define NET_TCP_TX_Q_STATE_NONE 0u #define NET_TCP_TX_Q_STATE_CLOSED 200u #define NET_TCP_TX_Q_STATE_CLOSING 201u #define NET_TCP_TX_Q_STATE_SYNC 210u #define NET_TCP_TX_Q_STATE_CONN 211u #define NET_TCP_TX_Q_STATE_SUSPEND 215u #define NET_TCP_TX_Q_STATE_CLOSED_SUSPEND 220u #define NET_TCP_TX_Q_STATE_CLOSING_SUSPEND 221u /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION CODE DEFINES **************
上传时间： 2015-11-22
上传用户：the same kong
是否要先打开ALLEGRO? 不需要(当然你的机器须有CADENCE系统)。生成完封装后在你的输出目录下就会有几千个器件（全部生成的话）,默认输出目录为c:\MySym\. Level里面的Minimum, Nominal, Maximum 是什么意思？ 对应ipc7351A的ABC封装吗？ 是的 能否将MOST, NOMINAL, LEAST三种有差别的封装在命名上也体现出差别？ NOMINAL 的名称最后没有后缀，MOST的后缀自动添加“Ｍ”，LEAST的后缀自动添加“L”，你看看生成的库名称就知道了。（直插件以及特别的器件，如BGA等是没有MOST和LEAST级别的，对这类器件只有NOMINAL） IC焊盘用长方形好像比用椭圆形的好，能不能生成长方形的？ 嗯。。。。基本上应该是非直角的焊盘比矩形的焊盘好，我记不得是AMD还是NS还是AD公司专门有篇文档讨论了这个问题，如果没有记错的话至少有以下好处：信号质量好、更省空间（特别是紧密设计中）、更省锡量。我过去有一篇帖子有一个倒角焊盘的SKILL，用于晶振电路和高速器件（如DDR的滤波电容)，原因是对宽度比较大的矩形用椭圆焊盘也不合适，这种情况下用自定义的矩形倒角焊盘就比较好了－－－你可以从网上另外一个DDR设计的例子中看到。 当然，我已经在程序中添加了一选择项，对一些矩形焊盘可以选择倒角方式. 刚才试了一下，感觉器件的命名的规范性不是太好，另好像不能生成器件的DEVICE文件，我没RUN完。。。 这个程序的命名方法基本参照IPC-7351，每个人都有自己的命名嗜好，仍是不好统一的；我是比较懒的啦，所以就尽量靠近IPC-7351了。 至于DEVICE，的选项已经添加 (这就是批量程序的好处，代码中加一行，重新生产的上千上万个封装就都有新东西了)。 你的库都是"-"的,请问用过ALLEGRO的兄弟,你们的FOOTPRINT认"-"吗?反正我的ALLEGRO只认"_"(下划线) 用“－”应该没有问题的，焊盘的命名我用的是"_"（这个一直没改动过）。 部分丝印画在焊盘上了。 丝印的问题我早已知道，只是尽量避免开（我有个可配置的SilkGap变量）,不过工作量比较大，有些已经改过，有些还没有；另外我没有特别费功夫在丝印上的另一个原因是，我通常最后用AUTO-SILK的来合并相关的层，这样既方便快捷也统一各个器件的丝印间距，用AUTO-SILK的话丝印线会自动避开SOLDER-MASK的。 点击allegro后命令行出现E- Can't change to directory: Files\FPM，什么原因？ 我想你一定是将FPM安装在一个含空格的目录里面了，比如C:\Program Files\等等之类，在自定义安装目录的时候该目录名不能含有空格，且存放生成的封装的目录名也不能含有空格。你如果用默认安装的话应该是不会有问题的, 默认FPM安装在C:\FPM，默认存放封装的目录为C:\MYSYM 0.04版用spb15.51生成时.allegro会死机.以前版本的Allegro封装生成器用spb15.51生成时没有死机现象 我在生成MELF类封装的时候有过一次死机现象，估计是文件操作错误导致ALLEGRO死机，原因是我没有找到在ｓｋｉｌｌ里面直接生成SHAPE焊盘的方法（FLASH和常规焊盘没问题）, 查了下资料也没有找到解决方法，所以只得在外部调用SCRIPT来将就一下了。（下次我再查查看），用SCRIPT的话文件访问比较频繁（幸好目前MELF类的器件不多）. 解决办法： １、对MELF类器件单独选择生成，其它的应该可以一次生成。 ２、试试最新的版本(当前0.05) 请说明运行在哪类器件的时候ALLEGRO出错，如果不是在MELF附近的话，请告知，谢谢。 用FPM0.04生成的封装好像文件都比较大，比如CAPC、RES等器件，都是300多K，而自己建的或采用PCB Libraries Eval生成的封装一般才几十K到100K左右，不知封装是不是包含了更多的信息？ 我的每个封装文件包含了几个文字层（REF,VAL,TOL,DEV,PARTNUMBER等),SILK和ASSEM也是分开的，BOND层和高度信息，还有些定位线(在DISP层）,可能这些越来越丰富的信息加大了生成文件的尺寸.你如果想看有什么内容的话，打开所有层就看见了（或REPORT） 非常感谢 LiWenHui 发现的BUG, 已经找到原因，是下面这行： axlDBChangeDesignExtents( '((-1000 -1000) (1000 1000))) 有尺寸空间开得太大，后又没有压缩的原因，现在生成的封装也只有几十K了，0.05版已经修复这个BUG了。 Allegro封装生成器0.04生成do-27封装不正确,生成封装的焊盘的位号为a,c.应该是A,B或者1,2才对. 呵呵，DIODE通常管脚名为AC(A = anode, C = cathode) 也有用AK 或 12的， 极少见AB。 除了DIODE和极个别插件以及BGA外，焊盘名字以数字为主, 下次我给DIODE一个选择项，可以选择AC 或 12 或 AK, 至于TRANSISTER我就不去区分BCE/CBE/ECB/EBC/GDS/GSD/DSG/DGS/SGD/SDG等了，这样会没完没了的，我将对TRANSISTER强制统一以数字编号了，如果用家非要改变，只得在生成库后手工修改。
标签： Footprint Maker 0.08 FPM skill
上传时间： 2018-01-10
上传用户：digitzing
At present, there is a strong worldwide push toward bringing fiber closer to indi- vidual homes and businesses. Fiber-to-the-Home/Business (FTTH/B) or close to it networks are poised to become the next major success story for optical fiber com- munications. In fact, FTTH connections are currently experiencing double-digit or even higher growth rates, e.g., in the United States the annual growth rate was 112% between September 2006 and September 2007, and their presence can add value of U.S. $4,000–15,000 to the selling price of a home.
标签： Technologies Broadband Networks Access
上传时间： 2020-05-26
上传用户：shancjb
eeworm.com VIP专区 单片机源码系列 1资源包含以下内容：1. 51单片机C语言入门教程.rar2. 用C51编写单片机延时函数.rar3. DS18B20温度转换与显示.rar4. AT45DB161D的测试程序.rar5. DATLV5618.rar6. SD_Card.zip7. KEILC51中文使用手册.rar8. 步进电机带调速程序.rar9. ISO14443.rar10. FM1702SL.rar11. 51系列单片机设计实例.rar12. 4X4矩阵键盘控制实验.rar13. 读卡程序.rar14. 万年历.rar15. C8051F大学课程.rar16. 基于AT89C2051的红外遥控学习器源程序.rar17. C语言实战105例源码.zip18. DIY小型LED点阵显示系统.rar19. IO模拟SPI实验.rar20. 温度监控系统的设计.rar21. F020.rar22. 51单片机常用汇编子程序.rar23. 基于DS18B20的可控温度报警器.rar24. c8051f310xmodembootloader.rar25. AVR单片机例程-微雪电子.rar26. TCP-IP_C51源程序.zip27. 基于ARM7最小系统的设计.rar28. sample_code_SHTxx.rar29. C计算器源代码.rar30. AT89C2051单片机做节日彩灯控制电路程序.rar31. 多功能遥控小车的硬件软件设计程序.rar32. 采用mega8和18b20的温度采集程序.rar33. modbus51.rar34. MEGA16读AD7705程序.rar35. 4位数码管动态显示实验.rar36. AVR单片机I2C总线实验.rar37. SPI接口实验LED显示.rar38. 时钟日历芯片PCF8563的应用程序（C语言）.rar39. 25811226hongwaigooog.rar40. 17869333sensor.rar41. 《AVR单片机原理及应用》.rar42. 16×16.zip43. 单片机应用技术（C语言版）[王静霞][程序源代码].zip44. SHT75.rar45. ARM论文集.rar46. psoc介绍及示例程序.zip47. 485通信仿真源码.rar48. 51单片机及其C语言程序开发实例光盘资料.rar49. 51单片机.rar50. 10红外解码.rar51. 《51单片机C语言快速上手》.rar52. 51单片机播放音乐电路仿真和代码.rar53. C语言程序设计实训100例——基于8051Proteus仿真.zip54. ST7565_Driver_menu.rar55. 红外抄表器.rar56. CAN现场总线.rar57. AD采样测量电压.rar58. LCD12864上显示波形.rar59. 基于AVR单片机GPS控制系统C程序.rar60. STM32F107_ETH_LwIP_V1.0.0.rar61. Si4432-T-B1版本资料.rar62. 模拟SPI控制nRF24L01程序.rar63. DS1302时钟DS18B20.rar64. 1602字符液晶滚动演示程序.zip65. 《PLC实用子程序》源代码下载.rar66. 超声波程序.rar67. 交通灯设计.rar68. Zigbee模块的详细电路原理图和C代码.rar69. 四轴飞行器代码.rar70. 用labview和pic单片机打造虚拟数字示波器上位机源程序.rar71. 用labview和pic单片机打造虚拟示波器下位机源程序.rar72. 1700语音芯片SPI控制程序.rar73. AVR触摸键盘.rar74. 基于AVR单片机的三相spwm波.rar75. 74HC165读按键.rar76. I2C协议.rar77. 51的GPS开发的NMEA数据读取与解析.rar78. 基于DS18B20的温度实时采集与显示系统的设计与实现.rar79. 基于单片机的PID温度控制系统.rar80. 33个毕业设计单片机类.rar81. 单片机外围电路设计.rar82. STM32SDCardSourceCodeFATFS.rar83. 基于ATM89C51单片机的IC卡读写器的设计.zip84. 51单片机时钟+秒表程序.rar85. 24l01 7对1 多机通信.rar86. 范例程序 SONiX.rar87. 单片机脉搏测量仪.doc88. 中颖单片机SH88F516例程.rar89. L298N直流电机步进电机两用驱动器.rar90. ARM LPC2478 CAN收发程序.rar91. 8051单片机C语言彻底应用.pdf92. STC单片机控制5线四相24BYJ-48 5V DC 步进电机正反转驱动程序.rar93. 基于单片机的红外遥控风扇硬件电路与程序.rar94. STM8示例程序.rar95. 12864菜单.rar96. 步进电机控制程序.rar97. ad9850.rar98. 51单片机LCD160128驱动程序.rar99. 51单片机I2C总线E2ROM驱动程序.rar100. scsi_port_guild.rar
上传时间： 2013-05-15
上传用户：eeworm
eeworm.com VIP专区 单片机源码系列 2资源包含以下内容：1. 1602.rar2. SST25VF016B_SOFT.C.H.rar3. DS1302.rar4. nRF24z1的c51参考代码.rar5. Lcd(12864).rar6. PLL-MB1504-ASM.rar7. PWM.rar8. ds12887.rar9. CAN.rar10. ISD4004.rar11. STC_EEPROM.rar12. CH452L.rar13. A7102-433.rar14. hdlc_receive_code.rar15. hdmi.rar16. 51-nRF24L01code.rar17. protel99-se.rar18. 18b20.rar19. DS18B20.rar20. dianjisudu.rar21. uCos.rar22. wang-pro-1.rar23. MAX232.rar24. 单片机C语言程序设计实训100例.rar25. 实用的51子程序库.rar26. PT2262soft.rar27. 12864.rar28. FWLib.rar29. ADC_of_CC2430.rar30. ds18b20.rar31. dac0832ppt.rar32. pad.rar33. LED.rar34. qt_example.rar35. H-Bridge.rar36. LCD(1602).rar37. FATFS(10.4).rar38. adc0809.rar39. DA0832.rar40. key8x8.rar41. FAT32.rar42. dsp.rar43. IPv4-IPv6-6to4.rar44. 嵌入式C语言程序设计——使用MCS-51.rar45. 51单片机C语言常用模块与综合系统设计实例精讲.rar46. 由零开始开发STM8.pdf47. Draw2DGraph.rar48. PCF8563.rar49. LCD1602.rar50. C8051F350.rar51. M16-Mp3.rar52. codewarrior_Samples.rar53. MSP430z_f247.rar54. loadfi.rar55. ARM.rar56. JTAG.rar57. SMDK2410_ZY_V11.rar58. CNC.rar59. USB_mouse.zip60. tinyos-2.x.rar61. j_11970_93small_rtos.rar62. CH374EVT.ZIP.ZIP63. LCD.rar64. TLC5615C.rar65. ADS7843(C51).rar66. GSM@C51.rar67. RF905.rar68. s3c2440_driver.rar69. C8051Fapplication.rar70. 声控小车.rar71. MEGA8USB5andavr.rar72. fat.rar73. Keil.rar74. U_Boot_Manual.rar75. 51mcu.rar76. LM1875gongfang.rar77. fs_sample1.rar78. MPC03-LV(20051210).rar79. 51.rar80. MINIGUI-PROG-GUIDE-V2.0-4C.rar81. protelxilinx.zip82. Nucleus.rar83. DigitalPersona.rar84. 12864LCD.rar85. 5110.rar86. C52-PS2.rar87. plc.rar88. C51.rar89. 8253.rar90. H.264编码解码器源码(c语言).zip91. C51.rar92. Intelligence_alam_code.zip93. dianyuan.rar94. 嵌入式电子钟.rar95. dra_psm.rar96. WavecomQ2406.rar97. Nios.rar98. HGui4.1.rar99. avr_iar_winavr.rar100. IIC.rar
上传时间： 2013-05-15
上传用户：eeworm
