Internet of Things (IoT) [26] is a new networking paradigm for cyber-physical systems that allow physical objects to collect and exchange data. In the IoT, physical objects and cyber-agents can be sensed and controlled remotely across existing network infrastructure, which enables the integration between the physical world and computer-based systems and therefore extends the Internet into the real world. IoT can find numerous applications in smart housing, environmental monitoring, medical and health care systems, agriculture, transportation, etc. Because of its significant application potential, IoT has attracted a lot of attention from both academic research and industrial development.
标签： Technologies Internet Things RFID for of
上传时间： 2020-06-08
上传用户：shancjb
Software-defined radios (SDRs) have been around for more than a decade. The first complete Global Positioning System (GPS) implementation was described by Dennis Akos in 1997. Since then several research groups have presented their contributions. We therefore find it timely to publish an up-to-date text on the sub- ject and at the same time include Galileo, the forthcoming European satellite- based navigation system. Both GPS and Galileo belong to the category of Global Navigation Satellite Systems (GNSS).
标签： A_Software-Defined_GPS_and_Galile o_Receiver
上传时间： 2020-06-09
上传用户：shancjb
Since OpenStreetMap (OSM) appeared more than ten years ago, new collaborative mapping approaches have emerged in different areas and have become important components of localised information and services based on localisation. There is now increased awareness of the importance of the space-time attributes of almost every event and phenomenon. Citizens now have endless possibilities to quickly geographically locate themselves with an accuracy previously thought impossible. Based on these societal drivers, we proposed a number of collaborative mapping experiments (“mapping parties”) to delegates of a large open-source geospatial conference and to citizens of the conference’s host city during July 2015.
标签： Information Leveraging Systems Mobile
上传时间： 2020-06-09
上传用户：shancjb
74HC595 A4950 MAX3232 ULN2003AD STM32F207VCT6 AD集成封装库，原理图库器件型号列表：Library Component Count : 53Name Description----------------------------------------------------------------------------------------------------1N4148 High Conductance Fast Diode1N4448 High Conductance Fast Diode1N914 High Conductance Fast Diode1N914A High Conductance Fast Diode1N914B High Conductance Fast Diode1N916 High Conductance Fast Diode1N916A High Conductance Fast Diode1N916B High Conductance Fast Diode2N3904 NPN General Purpose Amplifier74ALS86 74HC595 8M贴片晶振 A4950 直流电机驱动AO4805CAP CapacitorCAP SMD CapacitorCON2 ConnectorCON2*10 ConnectorCON2*12P ConnectorCON2*7 ConnectorCON2*9 ConnectorCON3 ConnectorCON4 ConnectorCON5 ConnectorCON7 ConnectorCap Pol 极性电解电容DIODE DiodeFUSE1 FuseFUSE2 FuseINDUCTOR2 IRF7351PbF N-MOSJS1-12V-FLED MAX487 MAX809RD R0.125 Less than 1/4 Watt Power Resistor.RES2 RGRPI*4 Res1 ResistorSGM8955XN5G/TR 测量放大器SM712 SN74LV4052AD SP3232ESST25VF016B-50-4I-S2AFI2C Real-Time Clock.STM32F107VTC6 STM32F107VTC6SW DIP-4 编码开关SW-PB SwitchTPS54302 45UA静态电流 3ATVS SMBJ30CAULN2003 XC6214XTAL Crystal OscillatorPCB封装库列表：Component Count : 40Component Name-----------------------------------------------4G模块-外置7D181K0603-LED0603C0603R0805C12061210181232255569-2*1P直针5569-2*2P直针AT-26CAP-D8DO-214AANHSOP-8J-SPDT-5JTAGL
上传时间： 2021-11-15
上传用户：ttalli
目前电动汽车主要以锂电池作为动力来源,为了提高锂电池的使用时间和安全性,为锂电池提供安全良好的运行环境,电池管理系统应运而生。BMS主控单元基于S32K144汽车级单片机,通过主从式网络控制结构能够对锂电池的各个参数进行采集与分析。采用扩展卡尔曼滤波对电池的荷电状态(SOC)进行估算,克服普通估算方法无法避免电池内阻误差的缺点,通过Matlab/Simulink软件仿真验证可使估算误差达到2%以内。At present,electric vehicles mainly use lithium batteries as the power source.In order to improve the running time and safety of lithium batteries,a safe and good operating environment for power batteries is provided,and a battery management system(BMS) has emerged.The BMS main control unit is based on the S32K144 automotive-grade control chip.Through the master-slave network control structure,it can collect and analyze the various parameters of the lithium battery.The Extended Kalman Filter(EKF) is used to estimate the state of charge(SOC) of the battery,which overcomes the shortcomings of the internal estimation method that cannot overcome the internal resistance error of the battery.It can be verified by Matlab/Simulink software simulation.The estimation error is within 2%.
上传时间： 2022-03-26
上传用户：XuVshu
对某四轮独立驱动电动汽车轮毂电机进行研究,设计一种永磁无刷直流电机控制器.以STM32F103RBT6芯片为基础,对电机驱动电路、采样电路和保护电路分别进行硬件设计与分析;同时,采用模块化软件设计方案,对该控制器的软件系统进行升级.实验验证表明:所设计的电机控制器能使电机响应迅速、转速稳定、无超调,且电动车动力输出性能良好.A permanent magnet brushless direct current motor controller was designed by studying the hub motor of a four-wheel independent drive electric vehicle.Based on STM32 F103RBT6 chip,the hardware design and analysis of motor drive circuit,sampling circuit and protection circuit were carried out respectively.At the same time,modular software design scheme was adopted to upgrade the software system of the controller.Experimental results show that the designed motor controller can ensure the motor fast response,stable speed,no overshoot,and good power output performances.
上传时间： 2022-03-26
上传用户：qingfengchizhu
本系统采用电动机电枢供电回路串接采样电阻的方式来实现对小型直流有刷电动机的转速测量。该系统主要由二阶低通滤波电路,小信号放大电路、单片机测量显示电路、开关稳压电源电路等组成。同时自制电机测速装置,用高频磁环作为载体,用线圈绕制磁环,利用电磁感应原理检测电机运行时的漏磁,将变化的磁场信号转化为磁环上的感应电流。用信号处理单元电路将微弱电信号转化为脉冲信号,送由单片机检测,从而达到准确测量电机的速度的要求。In this system, the sampling resistance of armature power supply circuit is connected in series to measure the speed of small DC brush motor. The system is mainly composed of second-order low-pass filter circuit, small signal amplifier circuit, single-chip measurement and display circuit, switching regulated power supply circuit and so on. At the same time, the self-made motor speed measuring device uses high frequency magnetic ring as the carrier, coil winding magnetic ring, and electromagnetic induction principle to detect the leakage of magnetic field during the operation of the motor, which converts the changed magnetic field signal into the induced current on the magnetic ring. The weak electric signal is transformed into pulse signal by signal processing unit circuit, which is sent to single chip computer for detection, so as to meet the requirement of accurate measurement of motor speed.
标签： 直流电动机
上传时间： 2022-03-26
上传用户：
LED 线阵显示装置, 分为 LED 线性旋转显示主机和图文录入器两部分。主机用直流电机带动由红绿 LED 组成的线阵旋转, 同时线阵按照时序依次切换显示状态, 在固定区域利用视觉暂留效果形成 16×16 点阵, 用以显示图文;图文录入器用 HMI 触控屏作为人机交互界面, 实现图文录入和回放功能。主机与图文录入器通过无线通信方式进行信息交互,可由图文录入器控制主机切换不同工作任务, 以及改变线阵显示内容。The LED linear array display device is divided into two parts:the one is the main unit used to display content,and the other one is used to input the contents.The main unit is driven by a DC motor to rotate the linear array composed by red and green light emitting diodes.At the same time,the 16×16 dot matrix that switching the display state according to the time sequence on the main unit displays pictures and texts in the fixed area,by using the visual temporary effect.The HMI touch screen is used as human machine interface to realize the function that input and playback pictures and texts.The two parts of the device communicate with each other through wireless communication.The image and text input controller can control the main unit to switch different tasks and change the content of linear array displayed.
标签： stc12c5a60s2 单片机 led
上传时间： 2022-03-28
上传用户：jiabin
因此，您想编写一个内核模块。您知道C，您已经编写了一些可以作为进程运行的常规程序，现在您想知道真正的动作在哪里，一个通配指针可以擦掉文件系统，核心转储意味着重新启动。内核模块到底是什么？模块是可以根据需要加载和卸载的代码段。它们扩展了内核的功能，而无需重新引导系统。例如。模块驱动程序的一种类型是设备驱动程序，它允许内核访问没有模块的系统硬件，我们将不得不构建单片内核并将新功能直接添加到内核映像中，除了具有更大的内核之外，这还具有缺点每次我们想要新功能时都要求我们重建并重新启动内核的过程So, you want to write a kernel module. You know C, you, ve written a few normal programs to run as processes, and now you want to get to where the real action is, to where a single wild pointer can wipe out your file system and a core dump means a reboot.What exactly is a kernel module? Modules are pieces of code that can be loaded and unloaded into th upon demand. They extend the functionality of the kernel without the need to reboot the system. For example.one type of module is the device driver, which allows the kernel to access hardware connected to the syste without modules, we would have to build monolithic kernels and add new functionality directly into the em ernel image, Besides having larger kernels
标签： linux
上传时间： 2022-03-30
上传用户：
本文首次设计并验证了基于macom三合一芯片设计的光模块电路,该电路旨在提供一种满足SFF-8472中规定的数字诊断功能的低成本SFP+模块。电路采用激光器驱动、限幅放大器、控制器以及时钟恢复单元集成的单芯片,在保证高精度数字诊断功能基础上,实现了低成本高可靠的特点。该电路在光接收接口组件与激光器驱动和限幅放大器单元的限幅放大器部分之间接入滤波器来提高模块的灵敏度及信号质量。在控制器单元的数字电位器的引脚上采用外加电阻的方式避免出现上电不发光的故障问题。该研究结果为下一代SFP-DD光模块设计与开发工作,奠定了一定的理论与实践基础。This paper designs and validates the optical module circuit based on the MACOM Trinity chip for the first time.This circuit aims to provide a low-cost SFP module which meets the digital diagnosis function specified in SFF-8472.The circuit uses a single chip integrated with laser driver,limiting amplifier,controller and clock recovery unit.On the basis of ensuring high precision digital diagnosis function,it achieves the characteristics of low cost and high reliability.The circuit connects a filter between the optical receiving interface module and the limiting amplifier part of the laser driver and limiting amplifier unit to improve the sensitivity and signal quality of the module.The pin of the digital potentiometer in the controller unit is equipped with an external resistance to avoid the problem of power failure.The research results lay a theoretical and practical foundation for optical module design in high-speed data center.
上传时间： 2022-04-03
上传用户：
