Introduction The Sil9135/Sil9135A HDMI Receiver with Enhanced Audio and Deep Color Outputs is a second-generation dual-input High Definition Multimedia Interface(HDMI)receiver. It is software-compatible with the Sil9133receiver, but adds audio support for DTS-HD and Dolby TrueHD. Digital televisions that can display 10-or 12-bit color depth can now provide the highest quality protected digital audio and video over a single cable. The Sil9135and Sil9135A devices, which are functionally identical, can receive Deep Color video up to 12-bit,1080p @60Hz. Backward compatibility with the DVI 1.0specification allows HDMI systems to connect to existing DVI 1.0 hosts, such as HD set-top boxes and PCs. Silicon Image HDMI receivers use the latest generation Transition Minimized Differential Signaling(TMDS) core technology that runs at 25-225 MHz.The chip comes pre-programmed with High-bandwidth?
上传时间： 2022-06-25
上传用户：ibeikeleilei
Datasheet SHT3x-DISHumidity and Temperature Sensor Fully calibrated, linearized, and temperaturecompensated digital output Wide supply voltage range, from 2.4 V to 5.5 V I2C Interface with communication speeds up to 1MHz and two user selectable addresses Typical accuracy of 2 %RH and 0.3 °C Very fast start-up and measurement time Tiny 8-Pin DFN package
上传时间： 2022-06-29
上传用户：ddk
1. General Description BL-M3362NS1 product is designed base on Broadcom BCM43362 chipset. It operates at 2.4GHz band and supports IEEE802.11b/g/n 1T1Rwith wireless data rate up to 72.2Mbps. It supports IEEE802.11isafety protocol, along with IEEE802.11e standard service quality. It supports standard interfaces SDIOV2.0(50 MHz,4-bit and1-bit) and generic SPI(up to 50 MHz), Integrated ARM Cortex?-M3 CPUwith on-chip memory enables running IEEE802.11 firmware that can be field-upgraded with future features.2. The range of applying Imaging platforms(printers, digital still cameras, digital picture frames)Consumer electronic devices(DTV, DVDplayers, Blu-ray players. etc.)Gaming platforms Carinformation MiFi/Mobile Routes Smart PAD Set-TopBoxes
标签： wifi
上传时间： 2022-07-04
上传用户：lostxc
PrefaceDuring the past years, there has been a quickly rising interest in radio access technologies for providingmobile as well as nomadic and fixed services for voice, video, and data. The difference indesign, implementation, and use between telecom and datacom technologies is also becoming moreblurred. One example is cellular technologies from the telecom world being used for broadband dataand wireless LAN from the datacom world being used for voice-over IP.Today, the most widespread radio access technology for mobile communication is digital cellular,with the number of users passing 5 billion by 2010, which is more than half of the world’s population.It has emerged from early deployments of an expensive voice service for a few car-borne users,to today’s widespread use of mobile-communication devices that provide a range of mobile servicesand often include camera, MP3 player, and PDA functions. With this widespread use and increasinginterest in mobile communication, a continuing evolution ahead is foreseen.This book describes LTE, developed in 3GPP (Third Generation Partnership Project) and providingtrue 4G broadband mobile access, starting from the first version in release 8 and through the continuingevolution to release 10, the latest version of LTE. Release 10, also known as LTE-Advanced,is of particular interest as it is the major technology approved by the ITU as fulfilling the IMTAdvancedrequirements. The description in this book is based on LTE release 10 and thus provides acomplete description of the LTE-Advanced radio access from the bottom up.Chapter 1 gives the background to LTE and its evolution, looking also at the different standardsbodies and organizations involved in the process of defining 4G. It also gives a discussion of the reasonsand driving forces behind the evolution.Chapters 2–6 provide a deeper insight into some of the technologies that are part of LTE and itsevolution. Because of its generic nature, these chapters can be used as a background not only for LTEas described in this book, but also for readers who want to understand the technology behind othersystems, such as WCDMA/HSPA, WiMAX, and CDMA2000.Chapters 7–17 constitute the main part of the book. As a start, an introductory technical overviewof LTE is given, where the most important technology components are introduced based onthe generic technologies described in previous chapters. The following chapters provide a detaileddescription of the protocol structure, the downlink and uplink transmission schemes, and the associatedmechanisms for scheduling, retransmission and interference handling. Broadcast operation andrelaying are also described. This is followed by a discussion of the spectrum flexibility and the associated
上传时间： 2022-07-08
上传用户：lostxc
CodeWarrior Development Studio（开发工作室）是完整的用于编程应用中硬件bring-up的集成开发环境。 采用CodeWarrior IDE，开发人员可以得益于采用各种处理器和平台（从Motorola到TI到Intel）间的通用功能性。根据Gartner Dataquest的报告，CodeWarrior编译器和调试器在商用嵌入式软件开发工具的使用率方面排名第一。
标签： codewarrior
上传时间： 2022-07-08
上传用户：qingfengchizhu
软件说明: 使用方法:(同BMP2PCB,只能导入黑白BMP文件.)关于比例:方法1) 对于经过图像处理软件处理过的BMP文件,由于比例已改变,可以先在PROTEL99SE的PCB里 按PCB实物大小画好KEEP层的外框,以便确定板大小, Place Graphics Options选项中,Placement Mode设置为Placement Rectang; 导入BMP时,图片的起点定位KEEP外框的左下角,终点定位在KEEP外框的右上角即可.方法2) 对于1:1扫描BMP文件,设置选项里,Place Graphics Options选项中, Placement Mode设置为Cursor;Scale设置为3.35;怎样在中文汉化版里编辑菜单：1. 打开PROTEL99SE，在PCB环境里，点左上角下键头，选择第二项；2. 点菜单右上角的MENU按钮，选EDIT;3. 点击菜单右上角的MENU按钮，选Expand ALL;4. 在菜单中找到选择向导 这一项，在其下面点击右键，选ADD(添加)；5. 在下面TEXT栏目里修改名成为：Klipper (Y for pop up){Y};6. 在Klipper下面点击右键，选ADD(添加);7. 在下面TEXT栏目里修改成为&Copy to Windows Clipboard,并在PROCES栏目后面 点BROWSE指向Klipper99se:copyToWindowsclipboaed, PARAM栏目里点后面的INFO指向$Description=copy to zhe windows clipboard;8. 重复6，7步骤：依次建立下： 键名称(TEXT)： Klipper 以下为子菜单： &Copy to Windows Clipboard ; BROWSE : Klipper99se:copyToWindows clipboaed, PARAM: $Description=copy to zhe windows (复制到WINDOWS剪贴板) &Paste From Windows Clipboard; PROCES: Klipper99se:PasteFromWindowsClipoard; PARAM: $Description=Paste From the Windows Clipoard; (WINDOWS剪贴板粘帖) Place &Graphic; PROCES: Klipper99se:PlaceGraphic; PARAM: $Description=Place Graphic using Klipper; (放置BMP图片) &Klipper Preferences PROCES: Klipper99se:KlipperPreferences; PARAM: $Description=Klipper Sst up; (设置参数)
标签： protel99SE
上传时间： 2022-07-12
上传用户：20125101110
ILI9881D Data Sheet for all customerAmorphous TFT LCD Single-Chip Driver 800(RGB)X1280 Resoltion,16.7M-Color Without internal Gramtwo data lanes supports up to 850Mbps on the mipi DSI link
上传时间： 2022-07-19
上传用户：bluedrops
Simulation can provide a lot of information about what the system is doing. We canadd the effect of different element, like Encoder resolution, ADC sampling rate, etc and understand how does it affect the system. Another benefit is the possibility to slow down the process, to gain insight on what happens of fast systems or, vice versa, speed up slow process.Because National Instruments is a unique company in the fact the we provide a fullhardware solution couple with a full development platform, we can use this tools in very particular ways For example, it is possible to combine the LabVIEW Control Design and Simulation Module along with the FPGA module to quickly prototype a controller. One of the main benefits of this approach is that there is no need to compile the FPGA code, which allows for a quick algorithm design turnaround and debugging.
标签： pid控制
上传时间： 2022-07-20
上传用户：yui0900826
The GD32F103xx device is a 32-bit general-purpose microcontroller based on the ARM?Cortex?-M3 RISC core with best ratio in terms of processing power, reduced power consumption and peripheral set. The Cortex?-M3 is a next generation processor core whichis tightly coupled with a Nested Vectored Interrupt Controller (NVIC), SysTick timer and advanced debug support.The GD32F103xx device incorporates the ARM ' Cortex?-M3 32-bit processor core operating at 108 MHz frequency with Flash accesses zero wait states to obtain maximumefficiency. It provides up to 3 MB on-chip Flash memory and up to 96 KB SRAM memory. An extensive range of enhanced I/Os and peripherals connected to two APB buses. The devices offer up to three 12-bit ADCs, up to two 12-bit DACs, up to ten general-purpose
标签： gd32f103
上传时间： 2022-07-23
上传用户：aben
一般调用元件的话，使用PartGallery的search功能都能找到相应的器件。注意MaST IOLAMS这里有两种不同语言描述的元件，一般不能同时在一张原理图中使用。在PartGallery中browse目录按照大的应用领域和市场领域划分。比喻Elctrical目录下包含一些电气行业相关的模型。1.翻转元件：选中该元件（可选多个），按R键，可实现90度翻转。按F键可实现180度翻转。2.电容或电感初始电压或电流值设置：在电容或电感元件的属性里有一项ic设置，默认未设置（undef），设置其为想要的值即可。3.Saber中，设置元件属性时，不能带任何单位符号，如电阻的“9，”电压的“V”时间的“S等，否则saber会报错。4.Saber中，仿真文件名不能和元件库中的元件同名，否则会报错。5.Saber中，原理图名称最好不要与路径名中有重复，否则会报错。6.原理图放大或缩小：按“page up或”“page down即可7.局部放大显示波形：直接拖动鼠标放大，或按“page up即可8.恢复波形显示原始大小：按“page down，”在右键菜单里点“zoom→tofi即可”9.按鼠标中键可拖动整个原理图包括波形显示图。
标签： saber
上传时间： 2022-07-23
上传用户：yb9018
