设计了农业温湿度智能控制系统,该系统采用DHT11温湿度传感器作为温湿度采集模块,单片机选用AT89C52代替并调用Virtual terminal模拟串口通信,LCD1604液晶显示器实时显示温湿度,实现了温湿度的测量、显示,可自动控制加热、降温、加湿、通风,实现温湿度控制以及超限报警处理,并利用Proteus与Keil进行实际电路的仿真。试验表明,该系统实现了可靠的温湿度监控。We described the design of an intelligent control system of agriculture temperature and humidity.The system uses DHT11 temperature and humidity sensor as the temperature and humidity acquisition module.The SCM adopts AT89C52 to replace and call the virtual terminal for simulating serial CoMMUnication.LCD1604 displays temperature and humidity in real time,which implements the measurement and display of temperature and humidity.The system is able to automatically control heating,cooling,humidification and ventilation,to achieve temperature and humidity control and over-limit alarm processing.The system also uses Proteus and Keil for actual circuit simulation.The experiment shows that the system is capable of reliable temperature and humidity monitoring.
上传时间： 2022-03-26
上传用户：aben
以仓库智能改造为背景,主要介绍单片机和上位机之间通信网络和通信协议的选择,MODBUS协议通信指令和功能码使用,重点阐述了基于RS-485总线的MODBUS通信协议在上位机和单片机之间的串行通信,实现上位机对单片机设备的远程控制和信息采集的功能。Based on the intelligent warehouse transformation as the background,mainly introduces between MCU and PC CoMMUnication network and the choice of CoMMUnication protocol,instruction and the function code using the MODBUS protocol CoMMUnication,expounds the MODBUS CoMMUnication protocol based on RS-485 bus serial CoMMUnication between PC and single chip microcomputer,PC remote control of single chip computer equipment and the function of information collection.
上传时间： 2022-03-26
上传用户：tigerwxf1
以STM32F103单片机与STM32F103单片机之间进行SPI双机通信为例,直接使用DMA传输进行数据的发送与接收,最后通过实验证明了DMA传输的高效和准确性。with the SPI dual-MIC CoMMUnication between STM32F103 MCU and STM32F103 MCU taken as an example,data transmission and reception are carried out directly by using DMA transmission to prove the efficiency and accuracy of DMA transmission by experiments.
上传时间： 2022-03-27
上传用户：aben
CAN总线是汽车上应用最广泛的车载网络总线,具有实时性强、可靠性高、成本低等优点。鉴于此,介绍了一种利用飞思卡尔系列单片机MC9S12XS128作为控制器,利用其内部的MSCAN模块、CAN收发器TJA1040等外围元件进行CAN总线通信节点设计。该设计能够实现CAN总线数据的发送与接收,可应用于汽车及其他各种CAN总线通信系统。CAN bus is the most widely used on-board network bus in automobiles. It has the advantages of realtime, high reliability and low cost. In view of this,this paper introduces the design of CAN bus CoMMUnication node by using Freescale MC9S12XS128 as controller,using its internal MSCAN module,CAN transceiver TJA1040 and other peripheral components. This design can realize the sending and receiving of CAN bus data,and can be used in automobile and other CAN bus CoMMUnication systems.
上传时间： 2022-03-27
上传用户：yb9018
设计了自动控制系统综合实验案例“基于LabVIEW和单片机的温度控制系统设计”。实验系统硬件部分由单片机、温度传感器、D/A转换模块、调压模块和电烤箱组成,设计了单片机与各个模块之间的接口电路。软件部分采用LabVIEW软件实现控制算法,并设计监控界面实现参数设定、温度数据实时监控等功能。设计了单片机与LabVIEW软件之间的串口通信程序,实现了输入、输出数据的传输。通过综合实验系统设计,使学生得到控制系统设计和实验调试等综合能力的训练。A comprehensive experimental case of the automatic control system is presented,which is the design of the temperature control system based on LabVIEW and SCM.The hardware part of the experimental system is composed of the SCM,temperature sensor,D/A conversion module,voltage regulating module and electric oven.The interface circuit between the SCM and each module is designed.In the software part,LabVIEW software is used to realize the control algorithm,and the monitoring interface is designed to realize the functions of parameter setting,temperature data real-time monitoring,etc.The serial CoMMUnication program between the SCM and LabVIEW software is designed to realize the transmission of input and output data.Through the design of this comprehensive experimental system,students can get the comprehensive ability training for the control system design,experiment debugging,etc.
上传时间： 2022-03-27
上传用户：qdxqdxqdxqdx
LED 线阵显示装置, 分为 LED 线性旋转显示主机和图文录入器两部分。主机用直流电机带动由红绿 LED 组成的线阵旋转, 同时线阵按照时序依次切换显示状态, 在固定区域利用视觉暂留效果形成 16×16 点阵, 用以显示图文;图文录入器用 HMI 触控屏作为人机交互界面, 实现图文录入和回放功能。主机与图文录入器通过无线通信方式进行信息交互,可由图文录入器控制主机切换不同工作任务, 以及改变线阵显示内容。The LED linear array display device is divided into two parts:the one is the main unit used to display content,and the other one is used to input the contents.The main unit is driven by a DC motor to rotate the linear array composed by red and green light emitting diodes.At the same time,the 16×16 dot matrix that switching the display state according to the time sequence on the main unit displays pictures and texts in the fixed area,by using the visual temporary effect.The HMI touch screen is used as human machine interface to realize the function that input and playback pictures and texts.The two parts of the device communicate with each other through wireless CoMMUnication.The image and text input controller can control the main unit to switch different tasks and change the content of linear array displayed.
标签： stc12c5a60s2 单片机 led
上传时间： 2022-03-28
上传用户：jiabin
近距电能传输——高效安全近距电能传输一般基于电磁感应原理进行。在此技术基础上，当接收器邻近发射器时才会进行电能传输。电磁感应技术的历史长达百年，多年米一直应用于各类电子产品中—如此普及全因其简单、高效以及安全技术概览以下将为你简要介绍无线电能传输技术。System Overview(CoMMUnication)Receiver sends messagesTo provide control information to the transmitterBy load modulation on the power signaTransmitter receives messagesTo receive control information frorn the recelverBy de-modulation of the reflected loadPower Pick Up( Receiver)Secondary coil (L Serial resonance capacitor (C) for efficient power transfer Parallel resonance capacitor(C, )for detection purposes Rectifier: full bridge(diode, or switched)+ capacitor Output switch for(dis)connecting the loadReceiver modulates load by Switching modulation resistor(R,n),or Switching modulation capacitor(Ca)Transmitter de-modulates reflected load by Sensing pnmary coil curent (p)and/o Sensing primary coil voltage (V,
上传时间： 2022-03-31
上传用户：13692533910
在全球气候变暖和石油资源短缺的形势下,推动新能源汽车的发展将成为汽车行业一种新的发展方向。在大力发展新能源电动汽车行业的同时还应兼顾电动汽车充电设施的发展,因此对电动汽车充电桩的设计与研究显得十分必要。对电动汽车直流充电桩的硬件系统进行设计,主要的硬件电路包括安全监测电路、总压采集电路、温湿度检测电路、语音电路。软件包括主要流程图和温湿度检测流程图。Under the situation of global warming and shortage of petroleum resources,promoting the development of new energy vehicles will become a new development direction for the automotive industry.While vigorously developing the new energy electric vehicle industry,we should also take into account the development of electric vehicle charging facilities.Therefore,the design and research of electric vehicle charging piles is very necessary.The hardware system of the electric vehicle DC charging pile is designed.The main hardware circuits include safety monitoring circuit,total voltage collecting circuit,temperature and humidity detecting circuit,voice circuit and CAN CoMMUnication.The software includes a main flow chart and a temperature and humidity detection flow chart.
标签： 电动汽车
上传时间： 2022-04-03
上传用户：jason_vip1
以STM32F103C8T6为核心,设计了无刷直流电机控制器硬件电路。电路主要包括IR2310构成的PWM驱动电路、IRF3808构成的逆变电路、增量式旋转编码构成的速度反馈电路。控制器具有CAN和RS232通信接口,可与计算机或PLC构成速度或位置伺服系统。利用由xPC目标搭建的半实物仿真平台对PI参数进行整定。测试了控制器的速度伺服响应性能,给定速度为2400rpm时,控制器响应时间为0.32s。实验结果表明,系统工作可靠,稳定性好,响应速度快,可以满足上肢康复机器人的机械臂速度控制性能要求。The hardware circuit of Brushless DC motor controller is designed by taking STM32F103C8T6 as the core,which mainly includes PWM driving circuits made up of IR2310,inverter circuit formed by IRF3808,speed feedback circuit composed of incremental rotary encoder and so on.Speed servo control system or position servo control system can be composed of BLDM controller with computer or PLC through CAN CoMMUnication interface or RS232 serial CoMMUnication interface.By using the hardware in the loop simulation platform built by xPC target,the PI parameters are set up.The Speed servo response performance of the controller is tested.When the speed is 2 400 rpm,the response time of the controller is 0...
上传时间： 2022-05-07
上传用户：GGMD
说明： 基于CC2541蓝牙模块与单片机的串口通信，ble蓝牙透传 ，安卓手机app与源码，串口调试助手(Based on CC2541 Bluetooth module and MCU serial CoMMUnication, ble Bluetooth transparent transmission, Android mobile app and source code, serial debugging assistant)
上传时间： 2022-05-16
上传用户：wwa875
