A kinematically redundant manipulator is a serial robotic arm that has more independently driven joints than are necessary to define the desired pose (position and orientation) of its end-effector. With this definition, any planar manipulator (a manipulator whose end-effector motion is restrained in a plane) with more than three joints is a redundant manipulator. Also, a manipulator whose end-effector can accept aspatialposeisaredundant manipulator ifithas morethan sixindependently driven joints. For example, the manipulator shown in Fig. 1.1 has two 7-DOF arms mounted on a torso with three degrees of freedom (DOFs). This provides 10 DOFs for each arm. Since the end-effector of each arm can have a spatial motion with six DOFs, the arms are redundant.
标签： Autonomous Modeling Planning Robots Path
上传时间： 2020-06-10
上传用户：shancjb
Design for manufacturability and statistical design encompass a number of activities and areas of study spanning the integrated circuit design and manufacturing worlds. In the early days of the planar integrated circuit, it was typical for a handful of practitioners working on a particular design to have a fairly complete understanding of the manufacturing process, the resulting semiconductor active and passive devices, as well as the resulting circuit - often composed of as few as tens of devices. With the success of semiconductor scaling, predicted and - to a certain extent even driven - by Moore’s law, and the vastly increased complexity of modern nano-meter scale processes and the billion-device circuits they allow, there came a necessary separation between the various disciplines.
标签： Manufacturability Statistical Design for and
上传时间： 2020-06-10
上传用户：shancjb
结构体的具体尺寸如下所示：a=1.20h=0.620其中介质锥的介电常数E=2.0。选定工作频率为f=15GHz相对应的真空中的波长为0=20mm，这样结构体的儿何尺寸己经完全确定，下面介绍求解的全过程选定求解方式为（Solution Type）Driven modal1.建立所求结构体的几何模型（单位：mm）。由于此结构体的几何形状较简单，使用工具栏中的Draw命令可直接画出，这里不再赘述述。画出的结构体如图4.1.2所示。2.充结构体的材料选定结构体中的锥体部分，添加其介电常数Er=20的介质材料注：如果HSS中没有提供与所需参数完全相同的材料，用户可以通过新建材料或修改已有材料，使其参数满足用户需求设定结构体的边界条件及其激励源a.选定结构体的贴片部分，设定其为理想导体（PerE）。b.画出尺寸为X×Y×Z=70mm×70mm×40mm的长方体作为辐射边界，并设定其边界条件为辐射边界条件（Radiation Boundary）。c.由于要求出结构体的RCS，因此设定激励源为平面入射波（Incident Wave Source）。如图4.1.3所示。4.设定求解细节，检验并求解a.设定求解过程的工作频率为f=15GHz.其余细节设定如图4.1.4所示。b.设定远区辐射场的求解（Far Field Radiation Sphere栏的设定）。c.使用 Validation check命令进行检验，无错误发生，下一步运行命令 Analyze，对柱锥结构体进行求解。如图4.1.5和4.1.6所示。
上传时间： 2022-03-10
上传用户：
以STC12C5A60S2单片机为控制核心,采用2.4G(JF24D)无线遥控模块进行无线发射与接收,设计了一种双电机遥控船模控制系统.该系统通过切换档杆实现前进后退,方向盘左右转动、暂停按钮等控制直流电机的正转、反转、暂停,使得电机驱动的遥控船模实现前进后退、左右转向、暂停等功能,有效解决了驱动功率小和船模之间相互干扰等问题,可广泛应用于遥控船模领域.Using STC12C5A60S2 single-chip microcomputer as the controller and 2.4 G(JF24D)wireless remote control module for wireless transmission and reception, a dual-motor remote control ship model control system is designed. The system realizes forward and backward by switching the gear lever. The steering wheel rotates left and right and the pause button controls the forward, reverse and pause of the dc motor. The remote controller of ship model driven by the motor realizes forward and backward, left and right steering, pause and other functions. The ship model control system can effectively solve the problems of small driving power and mutual interference between ship models, and can be widely used in the field of remote controller of ship model.
上传时间： 2022-03-27
上传用户：
LED 线阵显示装置, 分为 LED 线性旋转显示主机和图文录入器两部分。主机用直流电机带动由红绿 LED 组成的线阵旋转, 同时线阵按照时序依次切换显示状态, 在固定区域利用视觉暂留效果形成 16×16 点阵, 用以显示图文;图文录入器用 HMI 触控屏作为人机交互界面, 实现图文录入和回放功能。主机与图文录入器通过无线通信方式进行信息交互,可由图文录入器控制主机切换不同工作任务, 以及改变线阵显示内容。The LED linear array display device is divided into two parts:the one is the main unit used to display content,and the other one is used to input the contents.The main unit is driven by a DC motor to rotate the linear array composed by red and green light emitting diodes.At the same time,the 16×16 dot matrix that switching the display state according to the time sequence on the main unit displays pictures and texts in the fixed area,by using the visual temporary effect.The HMI touch screen is used as human machine interface to realize the function that input and playback pictures and texts.The two parts of the device communicate with each other through wireless communication.The image and text input controller can control the main unit to switch different tasks and change the content of linear array displayed.
标签： stc12c5a60s2 单片机 led
上传时间： 2022-03-28
上传用户：jiabin
pads layout是pads2007的核心模块，是复杂的、高速印制电路板的最终选择的设计环境。它是一个强有力的基于形状化(shape-ased)、规则驱动(rules-driven)的布局布线设计解决方案，它采用自动和交互式的布线方法，采用先进的目标连接与嵌入(OLE)自动化功能，有机地集成了前后端的设计工具，包括最终的测试、准备和生产制造过程。
上传时间： 2013-06-17
上传用户：eeworm
