Abstract: engineers often wish that radio susceptibility (RS) or radio immunity could be cured with an antibiotic, a vaccine, or someform of cure-all. Unfortunately, solving the RS problem is not that easy. Indeed, the laws of physics apply. In this article we discusssources of RS. We also offer tips and hints to protect systems, power supplies, printed circuit boards (PCBs), and electroniccomponents from radio frequency interference.
标签： Susceptibility Radio 无线电干扰
上传时间： 2014-12-30
上传用户：旗鱼旗鱼
Agilent AN 154 S-Parameter Design Application Note S参数的设计与应用 The need for new high-frequency, solid-state circuitdesign techniques has been recognized both by microwaveengineers and circuit designers. These engineersare being asked to design solid state circuitsthat will operate at higher and higher frequencies.The development of microwave transistors andAgilent Technologies’ network analysis instrumentationsystems that permit complete network characterizationin the microwave frequency rangehave greatly assisted these engineers in their work.The Agilent Microwave Division’s lab staff hasdeveloped a high frequency circuit design seminarto assist their counterparts in R&D labs throughoutthe world. This seminar has been presentedin a number of locations in the United States andEurope.From the experience gained in presenting this originalseminar, we have developed a four-part videotape, S-Parameter Design Seminar. While the technologyof high frequency circuit design is everchanging, the concepts upon which this technologyhas been built are relatively invariant.The content of the S-Parameter Design Seminar isas follows:
标签： S参数
上传时间： 2013-12-19
上传用户：aa54
The exacting technological demands created byincreasing bandwidth requirements have given riseto significant advances in FPGA technology thatenable engineers to successfully incorporate highspeedI/O interfaces in their designs. One aspect ofdesign that plays an increasingly important role isthat of the FPGA package. As the interfaces get fasterand wider, choosing the right package has becomeone of the key considerations for the systemdesigner.
上传时间： 2013-11-07
上传用户：wanghui2438
This document was developed under the Standard Hardware and Reliability Program (SHARP) TechnologyIndependent Representation of Electronic Products (TIREP) project. It is intended for use by VHSIC HardwareDescription Language (VHDL) design engineers and is offered as guidance for the development of VHDL modelswhich are compliant with the VHDL Data Item Description (DID DI-EGDS-80811) and which can be providedto manufacturing engineering personnel for the development of production data and the subsequent productionof hardware. Most VHDL modeling performed to date has been concentrated at either the component level orat the conceptual system level. The assembly and sub-assembly levels have been largely disregarded. Under theSHARP TIREP project, an attempt has been made to help close this gap. The TIREP models are based upon lowcomplexity Standard Electronic Modules (SEM) of the format A configuration. Although these modules are quitesimple, it is felt that the lessons learned offer guidance which can readily be applied to a wide range of assemblytypes and complexities.
上传时间： 2013-11-20
上传用户：pzw421125
CAM350 为PCB 设计和PCB 生产提供了相应的工具（CAM350 for PCB Designers 和CAM350 for CAM engineers），很容易地把PCB设计和PCB生产融合起来。CAM350 v8.7的目标是在PCB设计和PCB制造之间架起一座桥梁随着如今电子产品的朝着小体积、高速度、低价格的趋势发展，导致了设计越来越复杂，这就要求精确地把设计数据转换到PCB生产加工中去。CAM350为您提供了从PCB设计到生产制程的完整流程，从PCB设计数据到成功的PCB生产的转化将变得高效和简化。基于PCB制造过程，CAM350为PCB设计和PCB生产提供了相应的工具（CAM350 for PCB Designers和CAM350 for CAM engineers），很容易地把PCB设计和PCB生产融合起来。平滑流畅地转换完整的工程设计意图到PCB生产中提高PCB设计的可生产性，成就成功的电子产品为PCB设计和制造双方提供有价值的桥梁作用CAM350是一款独特、功能强大、健全的电子工业应用软件。DOWNSTREAM开发了最初的基于PCB设计平台的CAM350，到基于整个生产过程的CAM350并且持续下去。CAM350功能强大，应用广泛，一直以来它的信誉和性能都是无与伦比的。 CAM350PCB设计的可制造性分析和优化工具今天的PCB 设计和制造人员始终处于一种强大的压力之下，他们需要面对业界不断缩短将产品推向市场的时间、品质和成本开销的问题。在48 小时，甚至在24 小时内完成工作更是很平常的事，而产品的复杂程度却在日益增加，产品的生命周期也越来越短，因此，设计人员和制造人员之间协同有效工作的压力也随之越来越大！随着电子设备的越来越小、越来越复杂，使得致力于电子产品开发每一个人员都需要解决批量生产的问题。如果到了完成制造之后发现设计失败了，则你将错过推向市场的大好时间。所有的责任并不在于制造加工人员，而是这个项目的全体人员。多年的实践已经证明了，你需要清楚地了解到有关制造加工方面的需求是什么，有什么方面的限制，在PCB设计阶段或之后的处理过程是什么。为了在制造加工阶段能够协同工作，你需要在设计和制造之间建立一个有机的联系桥梁。你应该始终保持清醒的头脑，记住从一开始，你的设计就应该是容易制造并能够取得成功的。CAM350 在设计领域是一个物有所值的制造分析工具。CAM350 能够满足你在制造加工方面的需求，如果你是一个设计人员，你能够建立你的设计，将任务完成后提交给产品开发过程中的下一步工序。现在采用CAM350，你能够处理面向制造方面的一些问题，进行一些简单地处理，但是对于PCB设计来说是非常有效的，这就被成为"可制造性(Manufacturable)"。可制造性设计(Designing for Fabrication)使用DFF Audit，你能够确保你的设计中不会包含任何制造规则方面的冲突(Manufacturing Rule Violations)。DFF Audit 将执行超过80 种裸板分析检查，包括制造、丝印、电源和地、信号层、钻孔、阻焊等等。建立一种全新的具有艺术特征的Latium 结构，运行DFF Audit 仅仅需要几分钟的时间，并具有很高的精度。在提交PCB去加工制造之间，就能够定位、标识并立刻修改所有的冲突，而不是在PCB板制造加工之后。DFF Audit 将自动地检查酸角(acid traps)、阻焊条(soldermask slivers)、铜条(copper slivers)、残缺热焊盘(starved thermals)、焊锡搭桥(soldermask coverage)等等。它将能够确保阻焊数据的产生是根据一定安全间距，确保没有潜在的焊锡搭桥的条件、解决酸角(Acid Traps)的问题，避免在任何制造车间的CAM部门产生加工瓶颈。
上传时间： 2013-11-07
上传用户：chongchongsunnan
Abstract: The reality of modern, small form-factor ceramic capacitors is a good reminder to always readthe data sheet. This tutorial explains how ceramic capacitor type designations, such as X7R and Y5V,imply nothing about voltage coefficients. engineers must check the data to know, really know, how aspecific capacitor will perform under voltage.
上传时间： 2013-11-04
上传用户：梧桐
Abstract: How can an interface change a happy face to a sad face? engineers have happy faces when an interface works properly.Sad faces indicate failure somewhere. Because interfaces between microprocessors and ICs are simple—even easy—they are oftenignored until interface failure causes sad faces all around. In this article, we discuss a common SPI error that can be almostimpossible to find in a large system. Links to interface tutorial information are provided for complete information. Noise as a systemissue and ICs to minimize its effects are also described.
上传时间： 2013-11-18
上传用户：zgz317
DSP音频处理示例The benefits of real-time analysis provided by DSP/BIOS are often required in programs that were engineered without it. When the program is not built from the ground up using the DSP/BIOS kernel and real-time analysis features, the lack of familiarity prevents engineers from reaping the benefits of this very powerful tool set, especially in the final stage of development when real-time analysis is needed most. This application note provides an example of the necessary steps required to utilize DSP/BIOS features in order to bring these solutions to bear in an existing application.
标签： DSP real-time benefits analysis
上传时间： 2014-01-06
上传用户：003030
vTools is a toolbox for Matlab 5.3 developed within the Department of Electrical Systems and Automation (DSEA) of the University of Pisa (Italy) with the aim to offering to the Matlab users (especially control engineers and control engineering students) a completely graphical toolbox for linear system analysis and robust control synthesis
标签： Department Electrical developed Systems
上传时间： 2013-12-25
上传用户：tyler
This book is a hands-on introduction to the principles and practice of embedded system design using the PIC microcontroller. Packed with helpful examples and illustrations, it gives an in-depth treatment of microcontroller design, programming in both assembly language and C, and features advanced topics such as networking and real-time operating systems. It is accompanied by a CD-ROM containing copies of all programs and software tools used in the text and a `student version of the C complier Designing Embedded Systems with PIC Microcontrollers: Principles and Applications is ideal for students of electronics, mechatronics and computer engineering. engineers in industry and informed hobbyists will also find this book a valuable resource when designing and implementing both simple and sophisticated embedded systems using the PIC Microcontroller.
标签： introduction principles hands-on embedded
上传时间： 2014-01-17
上传用户：wuyuying
