Abstract: Engineers often wish that radio susceptibility (RS) or radio immunity could be cured with an antibiotic, a vaccine, or someform of cure-all. Unfortunately, solving the RS problem is not that easy. Indeed, the laws of physics apply. In this article we discusssources of RS. We also offer tips and hints to protect systems, power supplies, printed circuit boards (PCBs), and electroniccomponents from radio frequency interference.
标签： Susceptibility Radio 无线电干扰
上传时间： 2014-12-30
上传用户：旗鱼旗鱼
针对UHF读写器设计中，在符合EPC Gen2标准的情况下，对标签返回的高速数据进行正确解码以达到正确读取标签的要求，提出了一种新的在ARM平台下采用边沿捕获统计定时器数判断数据的方法，并对FM0编码进行解码。与传统的使用定时器定时采样高低电平的FM0解码方法相比，该解码方法可以减少定时器定时误差累积的影响；可以将捕获定时器数中断与数据判断解码相对分隔开，使得中断对解码影响很小，实现捕获与解码的同步。通过实验表明，这种方法提高了解码的效率，在160 Kb/s的接收速度下，读取一张标签的时间约为30次/s。 Abstract: Aiming at the requirement of receiving correctly decoded data from the tag under high-speed communication which complied with EPC Gen2 standard in the design of UHF interrogator， the article introduced a new technology for FM0 decoding which counted the timer counter to judge data by using the edge interval of signal capture based on the ARM7 platform. Compared with the traditional FM0 decoding method which used the timer timed to sample the high and low level， the method could reduce the accumulation of timing error and could relatively separate capture timer interrupt and the data judgment for decoding， so that the disruption effect on the decoding was small and realizd synchronization of capture and decoding. Testing result shows that the method improves the efficiency of decoding， at 160 Kb/s receiving speed， the time of the interrogator to read a tag is about 30 times/s.
上传时间： 2013-11-10
上传用户：liufei
Single-Ended and Differential S-Parameters Differential circuits have been important incommunication systems for many years. In the past,differential communication circuits operated at lowfrequencies, where they could be designed andanalyzed using lumped-element models andtechniques. With the frequency of operationincreasing beyond 1GHz, and above 1Gbps fordigital communications, this lumped-elementapproach is no longer valid, because the physicalsize of the circuit approaches the size of awavelength.Distributed models and analysis techniques are nowused instead of lumped-element techniques.Scattering parameters, or S-parameters, have beendeveloped for this purpose [1]. These S-parametersare defined for single-ended networks. S-parameterscan be used to describe differential networks, but astrict definition was not developed until Bockelmanand others addressed this issue [2]. Bockelman’swork also included a study on how to adapt single-ended S-parameters for use with differential circuits[2]. This adaptation, called “mixed-mode S-parameters,” addresses differential and common-mode operation, as well as the conversion betweenthe two modes of operation.This application note will explain the use of single-ended and mixed-mode S-parameters, and the basicconcepts of microwave measurement calibration.
上传时间： 2014-03-25
上传用户：yyyyyyyyyy
One of the strengths of Synplify is the Finite State Machine compiler. This is a powerfulfeature that not only has the ability to automatically detect state machines in the sourcecode, and implement them with either sequential, gray, or one-hot encoding. But alsoperform a reachability analysis to determine all the states that could possibly bereached, and optimize away all states and transition logic that can not be reached.Thus, producing a highly optimal final implementation of the state machine.
标签： Synplicity Machine Verilog Design
上传时间： 2013-10-20
上传用户：苍山观海
在Multisim 10软件环境下，设计一种由运算放大器构成的精确可控矩形波信号发生器，结合系统电路原理图重点阐述了各参数指标的实现与测试方法。通过改变RC电路的电容充、放电路径和时间常数实现了占空比和频率的调节，通过多路开关投入不同数值的电容实现了频段的调节，通过电压取样和同相放大电路实现了输出电压幅值的调节并提高了电路的带负载能力，可作为频率和幅值可调的方波信号发生器。Multisim 10仿真分析及应用电路测试结果表明，电路性能指标达到了设计要求。 Abstract: Based on Multisim 10， this paper designed a kind of rectangular-wave signal generator which could be controlled exactly composed of operational amplifier， the key point was how to implement and test the parameter indicators based on the circuit diagram. The duty and the frequency were adjusted by changing the time constant and the way of charging and discharging of the capacitor， the width of frequency was adjusted by using different capacitors provided with multiple switch， the amplitude of output voltage was adjusted by sampling voltage and using in-phase amplifier circuit，the ability of driving loads was raised， the circuit can be used as squarewave signal generator whose frequency and amplitude can be adjusted. The final simulation results of Multisim 10 and the tests of applicable circuit show that the performance indicators of the circuit meets the design requirements.
上传时间： 2014-01-21
上传用户：shen007yue
This simple SDI Notepad-like application demonstrates how, taking advantage of the MFC support for Unicode, to Turkmenize labels of the specified menu items. Actually, Turkmen is not supported by Windows 2000, therefore, to create such resources as menu so that strings in Turkmen could be displayed I had to invent an additional technique 这是一个与记事本类似的简单的SDI应用程序，演示了怎样使用MFC来支持 Unicode，对指定的菜单条目进行Turkmenize标签化。实际上，Windwos 2000并不支持Turknen,因此,创建了那些菜单资源以便那些字符串可以在Turknen中显示,为此我必须开发其它的技术。 来源: http://www.codeguru.com/advancedui/SDI_Note.html
标签： Notepad-like demonstrates application advantage
上传时间： 2013-11-26
上传用户：txfyddz
FPFilter is a sample disk filter driver that demonstrates how a disk failure prediction filter driver could be implemented. A failure prediction filter driver can predict when a disk may fail and notify the disk driver stack of this condition.
标签： filter disk demonstrates prediction
上传时间： 2015-03-30
上传用户：变形金刚
Although there has been a lot of AVL tree libraries available now, nearly all of them are meant to work in the random access memory(RAM). Some of them do provide some mechanism for dumping the whole tree into a file and loading it back to the memory in order to make data in that tree persistent. It serves well when there s just small amount of data. When the tree is somewhat bigger, the dumping/loading process could take a lengthy time and makes your mission-critical program less efficient. How about an AVL tree that can directly use the disk for data storage ? If there s something like that, we won t need to read through the whole tree in order to pick up just a little bit imformation(a node), but read only the sectors that are neccssary for locating a certain node and the sectors in which that node lies. This is my initial motivation for writing a storage-media independent AVL Tree. However, as you step forth, you would find that it not only works fine with disks but also fine with memorys, too.
标签： available libraries Although nearly
上传时间： 2014-01-22
上传用户：zhoujunzhen
Many applications use connection/object pool. A program may require a IMAP connection pool and LDAP connection pool. One could easily implement a IMAP connection pool, then take the existing code and implement a LDAP connection pool. The program grows, and now there is a need for a pool of threads. So just take the IMAP connection pool and convert that to a pool of threads (Copy, paste, find, replace????). Need to make some changes to the pool implementation? Not a very easy task, since the code has been duplicated in many places. Re-inventing source code is not an intelligent approach in an object oriented environment which encourages re-usability. It seems to make more sense to implement a pool that can contain any arbitrary type rather than duplicating code. How does one do that? The answer is to use type parameterization, more commonly referred to as templates.
标签： connection pool applications program
上传时间： 2013-12-25
上传用户：playboys0
This build is for developing a "binary-to-BCD" converter for use in // displaying numerals in base-10 so that people can read and interpret the // numbers more readily than they could if the numbers were displayed in // binary or hexadecimal format. Also, a "BCD-to-binary" converter is // tested in this build.
标签： binary-to-BCD developing displaying for
上传时间： 2015-07-07
上传用户：lmeeworm
