虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

commons-pool-current

  • Dual USB High-Side Power Switch

    The SP2526A device is a dual +3.0V to +5.5V USB Supervisory Power Control Switch ideal for self-powered and bus-powered Universal Serial Bus (USB) applications. Each switch has low on-resistance (110mΩ typical) and can supply 500mA minimum. The fault currents are limited to 1.0A typical and the flag output pin for each switch is available to indicate fault conditions to the USB controller. The thermal shutdown feature will prevent damage to the device when subjected to excessive current loads. The undervoltage lockout feature will ensure that the device will remain off unless there is a valid input voltage present.

    标签: High-Side Switch Power Dual USB

    上传时间: 2019-03-06

    上传用户:bhitr

  • BTS50_datasheet

    The BTS5016SDA is a one channel high-side power switch in PG-TO252-5-11 package providing embedded protective functions. The power transistor is built by a N-channel vertical power MOSFET with charge pump. The design is based on Smart SIPMOS chip on chip technology. The BTS5016SDA has a current controlled input and offers a diagnostic feedback with load current sense and a defined fault signal in case of overload operation, overtemperature shutdown and/or short circuit shutdown.

    标签: datasheet BTS 50

    上传时间: 2019-03-27

    上传用户:guaixiaolong

  • L9352B

    Description The L9352B is an integrated quad low-side power switch to drive inductive loads like valves used in ABS systems. Two of the four channels are current regulators with current range from 0 mA to 2.25 A. All channels are protected against fail functions. They are monitored by a status output.

    标签: L9352B

    上传时间: 2019-03-27

    上传用户:guaixiaolong

  • AZ1117H

    The AZ1117 is a series of low dropout three-terminal regulators with a dropout of 1.15V at 1A output current. The AZ1117 series provides current limiting and thermal shutdown. Its circuit includes a trimmed bandgap reference to assure output voltage accuracy to be within 1% for 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 5.0V and adjustable versions or 2% for 1.2V version. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal shutdown provides protection against any combination of overload and ambient temperature that would create excessive junction temperature.  The AZ1117 has an adjustable version, that can provide the output voltage from 1.25V to 12V with only 2 external resistors.

    标签: 1117H 1117 AZ

    上传时间: 2019-04-11

    上传用户:heaven0o0o0

  • Delphi三层数据库连接池 (1)

    Delphi三层数据库连接池 (1) Connection Pool for Delphi release notes ------------------------------------------------------------------------------- This document contains: - Short description of the product - Other text files - TRIAL version limitations - Delphi - versions supported - Installation of Connection Pool for Delphi - Installation of Connection Pool for Delphi help file - Ordering information - Support and Web resources - Thanks To

    标签: Delphi 数据库 连接

    上传时间: 2019-12-12

    上传用户:me2008

  • AD826

    High-Speed, Low-Power Dual Operational Amplifier The AD826 features high output current drive capability of 50 mA min per amp, and is able to drive unlimited capacitive loads. With a low power supply current of 15 mA max for both amplifiers, the AD826 is a true general purpose operational amplifier. The AD826 is ideal for power sensitive applications such as video cameras and portable instrumentation. The AD826 can operate from a single +5 V supply, while still achieving 25 MHz of band width. Furthermore the AD826 is fully specified from a single +5 V to ±15 V power supplies. The AD826 excels as an ADC/DAC buffer or active filter in data acquisition systems and achieves a settling time of 70 ns to 0.01%, with a low input offset voltage of 2 mV max. The AD826 is available in small 8-lead plastic mini-DIP and SO packages.

    标签: 826 AD

    上传时间: 2020-04-19

    上传用户:su1254

  • AD810

    PRODUCT DESCRIPTION The AD810 is a composite and HDTV compatible, current feedback, video operational amplifier, ideal for use in systems such as multimedia, digital tape recorders and video cameras. The 0.1 dB flatness specification at bandwidth of 30 MHz (G = +2) and the differential gain and phase of 0.02% and 0.04° (NTSC) make the AD810 ideal for any broadcast quality video system. All these specifications are under load conditions of 150 Ω (one 75 Ω back terminated cable). The AD810 is ideal for power sensitive applications such as video cameras, offering a low power supply current of 8.0 mA max. The disable feature reduces the power supply current to only 2.1 mA, while the amplifier is not in use, to conserve power. Furthermore the AD810 is specified over a power supply range of ±5 V to ±15 V.

    标签: 810 AD

    上传时间: 2020-04-19

    上传用户:su1254

  • AD8001AR

    transimpedance linearization circuitry. This allows it to drive video loads with excellent differential gain and phase perfor mance on only 50 mW of power. The AD8001 is a current feedback amplifier and features gain flatness of 0.1 dB to 100 MHz while offering differential gain and phase error of 0.01% and 0.025°. This makes the AD8001 ideal for professional video electronics such as cameras and video switchers. Additionally, the AD8001’s low distortion and fast settling make it ideal for buffer high-speed A-to-D converters. The AD8001 offers low power of 5.5 mA max (VS = ±5 V) and can run on a single +12 V power supply, while being capable of delivering over 70 mA of load current. These features make this amplifier ideal for portable and battery-powered applications where size and power are critical. The outstanding bandwidth of 800 MHz along with 1200 V/µs of slew rate make the AD8001 useful in many general purpose high-speed applications where dual power supplies of up to ±6 V and single supplies from 6 V to 12 V are needed. The AD8001 is available in the industrial temperature range of –40°C to +85°C.

    标签: 8001 AD AR

    上传时间: 2020-04-21

    上传用户:su1254

  • Designing Developing and Facilitating Smart Cities

    The concept of “smart city” is often used implying that the reader has a clear and common notion of what it means. However, in the current literature it is very hard to find a precise definition. What is even more interesting, it is not so easy to find a precise definition of what a city is.

    标签: Facilitating Developing Designing Cities Smart

    上传时间: 2020-05-25

    上传用户:shancjb

  • Photonics for Smart Cities

    We review the current applications of photonic technologies to Smart Cities. Inspired by the future needs of Smart Cities, we then propose potential applications of advanced photonic technologies. We find that photonics already has a major impact on Smart Cities, in terms of smart lighting, sensing, and communication technologies. We further find that advanced photonic technologies could lead to vastly improved infrastructure, such as smart water‐supply systems. We conclude by proposing directions for future research that will have the greatest impact on realizing Smart City initiatives.

    标签: Photonics Cities Smart

    上传时间: 2020-05-26

    上传用户:shancjb