UHF(Ultra High Frequency，超高频)RFID(Radio Frequency Identification，射频身份识别)技术是近几年刚刚开始兴起并得到迅速推广应用的一门新技术。该技术已被广泛应用于工业自动化、商业自动化、交通运输控制管理等众多领域。但是，基于超高频频段读写器的研制在我国尚处于起步阶段，传统的超高频读写器都是在单片机的基础上实现的，这类读写器很难实现复杂的多任务功能；随着经济的飞速发展，能够与网络互联并且带有操作系统的超高频读写器越来越受人们的青睐与追求。针对这些问题，本文设计并实现了一种基于ARMS3C2410微处理器和Linux操作系统的超高频读写器，主要内容有： (1)分析了射频识别技术的发展历程和前景，以嵌入式技术为研究背景，结合软硬件开发平台，给出了一种基于ARM和Linux的超高频读写器设计思路，指出了选题研究的目的和意义。 (2)阐述了超高频读写器的原理及其应用，分析了读写器和标签之间进行数据传输时所用到的相关技术；在给出超高频读写器主要技术性能指标及功能要求的基础上给出了基于ARMS3C2410和Linux超高频读写器系统的总体设计，同时对系统构建过程中所用到的软硬件进行了器件选型。 (3)实现了超高频读写器系统硬件电路的模块设计，主要包括主控电路模块、存储电路模块、电源模块、以太网模块、液晶显示模块以及射频收发模块；阐述了各模块的组成原理与实现方法，完成了硬件电路的原理图绘制及PCB制板。 (4)根据系统的软件需求，构建了一个进行嵌入式开发所需的软件平台。建立了交叉编译环境以及NFS开发调试环境；移植了系统启动所需的引导程序bootloader；实现了嵌入式Linux操作系统内核、文件系统的配置与移植；给出了Linux系统下典型设备(触摸屏、网络接口、LCD)驱动程序的移植方法。 (5)结合实验测试环境，对超高频读写器输出功率，读写器发送命令以及标签应答波形进行了测试与分析；对读写器的整机性能进行了联机测试，给出了读写器系统的实际运行效果图，同时对测试结果进行了总结。 实际应用结果表明，基于ARMS3C2410微处理器和Linux操作系统的超高频读写器能够实现接入网络的功能，其读写速度、识别率以及识别距离等技术性能指标均达到或优于设计标准要求，该读写器在与PC机连接的情况下能进行数据处理，样机系统运行稳定可靠，达到了预期的设计目标。
上传时间： 2013-07-25
上传用户：saharawalker
The MAX2870 ultra-wideband phase-locked loop (PLL) and voltagecontrol oscillator (VCO) can operate in both integer-N and fractional-Nmodes, similar to the Analog Devices ADF4350 wideband synthesizer.This application note compares the MAX2870 and ADF4350 registers andloop filter design in detail. Users who already familiar with ADF4350 canuse this application note as a quick design reference.
上传时间： 2014-12-23
上传用户：变形金刚
Abstract: The MAX3108 is a complete high-performance universal asynchronous receiver-transmitter (UART) in a tiny 2.1mm ×
标签： Programming Rates Baud 3108
上传时间： 2014-12-23
上传用户：清风冷雨
Application considerations and circuits for the LT1001 and LT1002 single and dual precision amplifiers are illustrated in a number of circuits, including strain gauge signal conditioners, linearized platinum RTD circuits, an ultra precision dead zone circuit for motor servos and other examples.
上传时间： 2013-10-18
上传用户：dreamboy36
The LM20, LM45, LM50, LM60, LM61, and LM62 are analog output temperature sensors. They have various output voltage slopes (6.25mV/°C to 17mV/°C) and power supply voltage ranges (2.4V to 10V).The LM20 is the smallest, lowest power consumption analog output temperature sensor National Semiconductor has released. The LM70 and LM74 are MICROWIRE/SPI compatible digital temperature sensors. The LM70 has a resolution of 0.125°C while the LM74 has a resolution of 0.625°C. The LM74 is the most accurate of the two with an accuracy better than ±1.25°C. The LM75 is National’s first digital output temperature sensor, released several years ago.
上传时间： 2014-12-23
上传用户：yl8908
The LTC®3414 offers a compact and efficient voltage regulatorsolution for point of load conversion in electronicsystems that require low output voltages (down to 0.8V)from a 2.5V to 5V power bus. Internal power MOSFETswitches, with only 67mW on-resistance, allow theLTC3414 to deliver up to 4A of output current with efficiencyas high as 94%. The LTC3414 saves space by operatingwith switching frequencies as high as 4MHz, enabling theuse of tiny inductors and capacitors.
上传时间： 2014-01-03
上传用户：dongbaobao
Automotive batteries, industrial power supplies, distributedsupplies and wall transformers are all sources ofwide-ranging high voltage inputs. The easiest way to stepdown these sources is with a high voltage monolithicstep-down regulator that can directly accept a wide inputrange and produce a well-regulated output. The LT®3493accepts inputs from 3.6V to 36V and LT3481 acceptsinputs from 3.6V to 34V. Both provide excellent lineand load regulation and dynamic response. The LT3481offers a high effi ciency solution over a wide load range andkeeps the output ripple low during Burst Mode® operationwhile the LT3493 provides a tiny solution with minimalexternal components. The LT3493 operates at 750kHzand the LT3481 has adjustable frequency from 300kHzto 2.8MHz. High frequency operation enables the use ofsmall, low cost inductors and ceramic capacitors.
上传时间： 2014-12-24
上传用户：Pzj
Handheld designers often grapple with ways to de-bounceand control the on/off pushbutton of portable devices.Traditional de-bounce designs use discrete logic, fl ipflops, resistors and capacitors. Other designs includean onboard microprocessor and discrete comparatorswhich continuously consume battery power. For highvoltage multicell battery applications, a high voltageLDO is needed to drive the low voltage devices. All thisextra circuitry not only increases required board spaceand design complexity, but also drains the battery whenthe handheld device is turned off. Linear Technology addressesthis pushbutton interface challenge with a pairof tiny pushbutton controllers.
上传时间： 2013-11-18
上传用户：ZJX5201314
The LTC®3569 is a compact power solution for handhelddevices. Its tiny 3mm × 3mm QFN package includesthree buck regulators with individually programmableoutput voltages. One regulator supports load currentsup to 1200mA, while the other two support currents to600mA. Two regulators can be paralleled for increasedload capability. Each current-mode regulator is internallycompensated with excellent load and line regulation. Acomplete 2- or 3-output solution requires a minimumof external passive components.
上传时间： 2013-10-11
上传用户：yxgi5
An essential component of a noise-free audio device isa clean power supply, but few switching regulators canoperate at high efficiency while keeping the switchingfrequency out of the audio band. The LTC®3620 fills thisvoid. It is a high efficiency 15mA buck regulator with aprogrammable minimum switching frequency, making itpossible to virtually eliminate audible switching noise. Theinternal synchronous switches and low quiescent currentof this buck regulator provide the ability to maintain highefficiency, while its small footprint makes it ideal for tiny,low power audio applications.
上传时间： 2013-10-21
上传用户：非衣2016
