The μPSD32xx family, from ST, consists of Flash programmable system devices with a 8032 MicrocontrollerCore. Of these, the μPSD3234A and μPSD3254A are notable for having a complete implementationof the USB hardware directly on the chip, complying with the Universal Serial Bus Specification, Revision1.1.This application note describes a demonstration program that has been written for the DK3200 hardwaredemonstration kit (incorporating a μPSD3234A device). It gives the user an idea of how simple it is to workwith the device, using the HID class as a ready-made device driver for the USB connection.IN-APPLICATION-PROGRAMMING (IAP) AND IN-SYSTEM-PROGRAMMING (ISP)Since the μPSD contains two independent Flash memory arrays, the Micro Controller Unit (MCU) can executecode from one memory while erasing and programming the other. Product firmware updates in thefield can be reliably performed over any communication channel (such as CAN, Ethernet, UART, J1850)using this unique architecture. For In-Application-Programming (IAP), all code is updated through theMCU. The main advantage for the user is that the firmware can be updated remotely. The target applicationruns and takes care on its own program code and data memory.IAP is not the only method to program the firmware in μPSD devices. They can also be programmed usingIn-System-Programming (ISP). A IEEE1149.1-compliant JTAG interface is included on the μPSD. Withthis, the entire device can be rapidly programmed while soldered to the circuit board (Main Flash memory,Secondary Boot Flash memory, the PLD, and all configuration areas). This requires no MCU participation.The MCU is completely bypassed. So, the μPSD can be programmed or reprogrammed any time, anywhere, even when completely uncommitted.Both methods take place with the device in its normal hardware environment, soldered to a printed circuitboard. The IAP method cannot be used without previous use of ISP, because IAP utilizes a small amountof resident code to receive the service commands, and to perform the desired operations.
标签： Demonstration 3200 USB for
上传时间： 2014-02-27
上传用户：zhangzhenyu
The PL2303 USB to Serial adapter is your smart and convenient accessory forconnecting RS-232 serial devices to your USB-equipped Windows host computer. Itprovides a bridge connection with a standard DB 9-pin male serial port connector inone end and a standard Type-A USB plug connector on the other end. You simplyattach the serial device onto the serial port of the cable and plug the USB connectorinto your PC USB port. It allows a simple and easy way of adding serial connectionsto your PC without having to go thru inserting a serial card and traditional portconfiguration.This USB to Serial adapter is ideal for connecting modems, cellular phones, PDAs,digital cameras, card readers and other serial devices to your computer. It providesserial connections up to 1Mbps of data transfer rate. And since USB does not requireany IRQ resource, more devices can be attached to the system without the previoushassles of device and resource conflicts.Finally, the PL-2303 USB to Serial adapter is a fully USB Specification compliantdevice and therefore supports advanced power management such as suspend andresume operations as well as remote wakeup. The PL-2303 USB Serial cable adapteris designed to work on all Windows operating systems.
上传时间： 2013-11-01
上传用户：ghostparker
USB接口控制器参考设计,xilinx提供VHDL代码 usb xilinx vhdl ; This program is free software; you can redistribute it and/or modify ; it under the terms of the GNU General Public License as published by ; the Free Software Foundation; either version 2 of the License, or ; (at your option) any later version. ; ; This program is distributed in the hope that it will be useful, ; but WITHOUT ANY WARRANTY; without even the implied warranty of ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ; GNU General Public License for more details. ; ; You should have received a copy of the GNU General Public License ; along with this program; if not, write to the Free Software ; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
上传时间： 2013-10-12
上传用户：windgate
USB接口控制器参考设计,xilinx提供VHDL代码 usb xilinx vhdl ; This program is free software; you can redistribute it and/or modify ; it under the terms of the GNU General Public License as published by ; the Free Software Foundation; either version 2 of the License, or ; (at your option) any later version. ; ; This program is distributed in the hope that it will be useful, ; but WITHOUT ANY WARRANTY; without even the implied warranty of ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ; GNU General Public License for more details. ; ; You should have received a copy of the GNU General Public License ; along with this program; if not, write to the Free Software ; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
上传时间： 2013-10-29
上传用户：zhouchang199
LPC2148 USB Audio Device Example This USB example project implements an USB Audio Device that connects via the USB interface to the PC. It may be used on the following devices: LPC2141 LPC2142 LPC2144 LPC2146 LPC2148 An USB Audio Device (HID) does not require any special USB driver, since the USB Audio support is already built into Windows 2000 and Windows XP. Therefore USB Audio devices can be directly connected to the computer. This example project is designed to work with Keil MCB2140 Evaluation Board. Refer to Running USBAudio for information on how to operate this example project.
标签： Device USB Audio implements
上传时间： 2015-04-16
上传用户：VRMMO
这是一个CAN总线适配器的程序，将CAN节点的数据采集之后通过USB接口传送到上位PC机上去，由于保密性，现在只上传CAN节点的部分程序，供大家参考
上传时间： 2013-11-30
上传用户：阳光少年2016
This document provides guidelines for integrating a discrete high speed USB host controller onto a fourlayer desktop motherboard. The material covered can be broken into three main categories: Board design guidelines, EMI/ESD guidelines and front panel USB guidelines. Section 1.1 Background provides an explanation of the routing experiments and testing performed to validate the feasibility of 480 Megabits per second on an actual motherboard. Section 7 contains a design checklist that lists each design recommendation described in this document. High speed USB operation is described in the USB 2.0 Specification (http://www.usb.org/developers/docs.html).
标签： integrating controller guidelines document
上传时间： 2013-11-27
上传用户：电子世界
This document provides guidelines for integrating a discrete high speed USB host controller onto a fourlayer desktop motherboard. The material covered can be broken into three main categories: Board design guidelines, EMI/ESD guidelines and front panel USB guidelines. Section 1.1 Background provides an explanation of the routing experiments and testing performed to validate the feasibility of 480 Megabits per second on an actual motherboard. Section 7 contains a design checklist that lists each design recommendation described in this document. High speed USB operation is described in the USB 2.0 Specification (http://www.usb.org/developers/docs.html).
标签： integrating controller guidelines document
上传时间： 2015-11-18
上传用户：xhz1993
Universal Serial Bus (USB) is a communications architecture that gives a personal computer (PC) the ability to interconnect a variety of devices using a simple four- wire cable. The USB is actually a two-wire serial communication link that runs at either 1.5 or 12 megabits per second (mbs). USB protocols can configure devices at startup or when they are plugged in at run time. These devices are broken into various device classes. Each device class defines the common behavior and protocols for devices that serve similar functions. Some examples of USB device classes are shown in the following table
标签： communications architecture Universal computer
上传时间： 2015-12-08
上传用户：stvnash
CAN51开发板功能 1、 USB或DC＋5V供电； 2、 89c52＋sja1000＋tja1050（tja1040）（p82c250）；89c52＋mcp2515＋tja1050（tja1040）（p82c250）；通过跳键选择sja1000或 mcp2515，用户任选一种CAN控制芯片； 3、 支持RS232/422/485总线与CAN总线相互转换； 4、 CAN总线波特率可调：20，40，50，80，100，125，200，250，400，500，666，800，1000Kbit/s 5、 提供电路图； 6、 提供源程序：basican和pelican模式（CAN2.0A和CAN2.0B），c语言和汇编语言，程序注释详尽； 7、 成对购买开发板可以实现：A开发板发送数据，B开发板接收数据，并把接收到的数据通过串口上传到计算机显示；A开发板上短路键的状态，可以通过CAN总线发送给B开发板，通过B开发板LED灯的亮灭，显示A开发板上短路键的状态； 8、 提供技术支持，接受CAN开发项目；
上传时间： 2016-11-22
上传用户：fxf126@126.com
