针对 PID参数复杂繁琐的整定过程这一问题，提出了基于MATLAB/Simulink仿真环境，模拟工程稳定边界法的船载雷达伺服系统PID参数整定策略和步骤，并进行了仿真实验。结果表明该方法具有良好的收敛性，使得控制系统动态性能得到有效改善，并且很大程度上减少了工作量。
上传时间： 2013-10-25
上传用户：fang2010
S3010舵机技术参数
上传时间： 2013-11-20
上传用户：comer1123
目前在食品工业领域中涉及新产品开发、食品包装、微波食品加工、、MW 食品测试、 MW 烤炉设计和测试、新材料研究、MW 和RF 相关应用等，而在研究开发过程中对重要参数—— 温度及压力的测量一直是个难题，具调查了解国内现阶段大都采用热电偶或红外测温仪测量温 度，由于热电偶容易受电磁、微波、射频等干扰，所以不能实现时实测量，采集的温度数据可用 性不高，而红外测量虽然能时实测量，但是它是非接触测量受很多因素干扰（特别是水蒸汽）， 而且测量精度也不满足研究要求，所以两种方法都不能很好的解决温度测量问题，给研究工作带 来很多不便。 加拿大Opsens公司的光纤传感器很好地解决了温度及压力测量问题，Opsens传感器完全抗电磁、 微波、射频等干扰，多通道在线时实监测微波中食物内、外各个部位温度差异与变化，给研究食 物在不同温度下的成分及含量提供可靠准确的数据，同时通过RS232与计算机连接由软件控制可 以很直观地观察温度、压力曲线变化。
上传时间： 2014-06-01
上传用户：laomv123
根据通信协议完成了主机和水质传感器之间通信，并对读取到的数据处理后利用MSChart控件实时显示，从而达到水质参数实时显示和实时监控。通过与随机采集处理软件实验比对表明，采集处理结果正确，达到了实时采集监控的目标。
标签： Levelogger Solinst 3001 参数采集
上传时间： 2013-10-30
上传用户：破晓sunshine
该系统采用自校正控制原理和常规PID控制相结合的算法!能快速整定出PID控制器的参数
上传时间： 2013-10-21
上传用户：Shaikh
The CC1101 is a low-cost sub- 1 GHztransceiver designed for very low-powerwireless applications. The circuit is mainlyintended for the ISM (Industrial, Scientific andMedical) and SRD (Short Range Device)frequency bands at 315, 433, 868, and 915MHz, but can easily be programmed foroperation at other frequencies in the 300-348MHz, 387-464 MHz and 779-928 MHz bands.CC1101 is an improved and code compatibleversion of the CC1100 RF transceiver. Themain improvements on the CC1101 include:
上传时间： 2013-11-12
上传用户：363186
过去，RF功率的性能完全取决于线性效率。如今，开发者遇到更加复杂的挑战：需要满足多种标准、信号变化和严格的带宽要求等。针对这一问题，飞思卡尔半导体(NYSE：FSL)日前推出新型硅片RF LDMOS功率晶体管Airfast RF功率解决方案，将性能和能效提升至新的高度。飞思卡尔通过新的产品系列解决了这种模式转变带来的问题，该产品系列基于一种更加全面、完整的系统级RF功率技术方法。
上传时间： 2013-11-25
上传用户：drink！
The main objective of this book is to present all the relevant informationrequired for RF and micro-wave power amplifier design includingwell-known and novel theoretical approaches and practical design techniquesas well as to suggest optimum design approaches effectively combininganalytical calculations and computer-aided design. This bookcan also be very useful for lecturing to promote the analytical way ofthinking with practical verification by making a bridge between theoryand practice of RF and microwave engineering. As it often happens, anew result is the well-forgotten old one. Therefore, the demonstrationof not only new results based on new technologies or circuit schematicsis given, but some sufficiently old ideas or approaches are also introduced,that could be very useful in modern practice or could contributeto appearance of new ideas or schematic techniques.
标签： Amplifier Microwave Design Power
上传时间： 2013-12-22
上传用户：vodssv
When I started writing the first edition of RF Power Amplifiers for Wireless Communications,some time back in 1997, it seemed that I was roaming a largely uninhabitedlandscape. For reasons still not clear to me there were few, if any, otherbooks dedicated to the subject of RF power amplifiers. Right at the same time, however,hundreds of engineers were being assigned projects to design PAs for wirelesscommunications products. It was not, therefore, especially difficult to be successfulwith a book that was fortuitously at the right place and the right time.
标签： Communications Amplifiers Wireless Edition
上传时间： 2013-11-12
上传用户：YYRR
RF circuit design theory and application(射频电路设计)
标签： application circuit design theory
上传时间： 2014-12-30
上传用户：aeiouetla
