虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

NO气体

  • 医用充气式保温毯控制系统设计及仿真

    针对医用充气式保温毯的温度控制要求,提出其温度控制闭环系统的结构,系统的硬件电路主要由温度传感器、单片机及RS232通讯模块等组成。采用PWM方法控制晶闸管导通时间的方式来改变加热丝的加热时间、采用自适应模糊PID控制方法实现保温毯气囊出气温度的自动调节与控制。将整个控制过程分为两个阶段:自动调节初始阶段,加热丝加热的占空比为100%;当温度达到一定值后转入自适应模糊PID控制阶段,由相应控制量来决定加热丝加热的占空比,实现气体温度的调节。通过MATLAB仿真分析表明,所采用的自适应模糊PID控制方法优于常规的PID控制,具有良好的适应性和鲁棒性,可明显提高系统的稳态精度。

    标签: 保温毯 仿真 控制系统设计

    上传时间: 2013-10-13

    上传用户:520

  • FET430PIF自制资料

    The MSP-FET430PIF is a Parallel Port interface (does not include target board) that is used to program and debug MSP430 FET tools and test boards through the JTAG interface. This interface is included in our FET tools, but sold without the development board. This interface uses a Parallel PC Port to communicate to the Debugger Software (IAR Kickstart software included) running on the PC. The interface uses the standard 14 pin header to communicate to the MSP430 device using the standard JTAG protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is extremely low power, no external power supply is required. The tool has an integrated software environment and connects directly to the PC which greatly simplifies the set-up and use of the tool. The flash development tool supports development with all MSP430 flash parts. Features MSP430 debugging interface to connect a MSP430-Flash-device to a Parallel port on a PC Supports JTAG debug protocol (NO support for Spy-Bi-Wire (2-wire JTAG) debug protocol, Spy-Bi-Wire (2-wire JTAG) is supported by MSP-FET430UIF) Parallel Port cable and a 14-conductor target cable Full documentation on CD ROM Integrated IAR Kickstart user interface which includes: Assembler Linker Limulator Source-level debugger Limited C-compiler Technical specifications: Backwardly compatable with existing FET tool boards.

    标签: FET 430 PIF

    上传时间: 2013-10-26

    上传用户:fengweihao158@163.com

  • MSP430 USB JTAG自制资料

    The MSP-FET430U14 is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required. The debugging tool interfaces the MSP430 to the included integrated software environment and includes code to start your design immediately.  The MSP-FET430UIF development tools supports development with all MSP430 flash devices

    标签: JTAG MSP 430 USB

    上传时间: 2013-10-28

    上传用户:13691535575

  • 红外遥控系统原理及单片机软件解码实例

    红外线遥控是目前使用最广泛的一种通信和遥控手段。由于红外线遥控装置具有体积小、功耗低、功能强、成本低等特点,因而,继彩电、录像机之后,在录音机、音响设备、空凋机以及玩具等其它小型电器装置上也纷纷采用红外线遥控。工业设备中,在高压、辐射、有毒气体、粉尘等环境下,采用红外线遥控不仅完全可靠而且能有效地隔离电气干扰。

    标签: 红外遥控 系统原理 单片机软件 解码

    上传时间: 2013-11-18

    上传用户:swaylong

  • PICKIT™ 2 PROGRAMMER-TO-

    PICKIT™ 2 PROGRAMMER-TO-GO USER GUIDE The PICkit 2 Programmer-To-Go functionality allows a PIC MCU memory image to be downloaded into the PICkit 2 unit for later programming into a specific PIC MCU. No software or PC is required to program devices once the PICkit 2 unit is set up for Programming-To-Go. A USB power source for the PICkit 2 is all that is needed.

    标签: PROGRAMMER-TO PICKIT 8482

    上传时间: 2013-10-29

    上传用户:ca05991270

  • Stellaris(群星)单片机的片上FLASH编程(英)

    Stellaris(群星)单片机的片上FLASH编程(英) INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH LUMINARY MICRO PRODUCTS. NO LICENSE,EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THISDOCUMENT. EXCEPT AS PROVIDED IN LUMINARY MICRO’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS,LUMINARY MICRO ASSUMES NO LIABILITY WHATSOEVER, AND LUMINARY MICRO DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY, RELATING TO SALE AND/OR USE OF LUMINARY MICRO’S PRODUCTS INCLUDING LIABILITY OR WARRANTIESRELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHTOR OTHER INTELLECTUAL PROPERTY RIGHT. LUMINARY MICRO’S PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL,LIFE SAVING, OR LIFE-SUSTAINING APPLICATIONS.

    标签: Stellaris FLASH 单片机 编程

    上传时间: 2013-10-22

    上传用户:JamesB

  • Stellaris(群星)单片机加上32KB串行SRAM(英

    Stellaris(群星)单片机加上32KB串行SRAM(英) INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH LUMINARY MICRO PRODUCTS. NO LICENSE,EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THISDOCUMENT. EXCEPT AS PROVIDED IN LUMINARY MICRO’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS,LUMINARY MICRO ASSUMES NO LIABILITY WHATSOEVER, AND LUMINARY MICRO DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY, RELATING TO SALE AND/OR USE OF LUMINARY MICRO’S PRODUCTS INCLUDING LIABILITY OR WARRANTIESRELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHTOR OTHER INTELLECTUAL PROPERTY RIGHT. LUMINARY MICRO’S PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL,LIFE SAVING, OR LIFE-SUSTAINING APPLICATIONS.

    标签: Stellaris SRAM 32 KB

    上传时间: 2013-11-22

    上传用户:lixqiang

  • AT89C2051驱动步进电机的电路和源码

    AT89C2051驱动步进电机的电路和源码:AT89C2051驱动步进电机的电路和源码 程序:stepper.c stepper.hex/* * STEPPER.C * sweeping stepper's rotor cw and cww 400 steps * Copyright (c) 1999 by W.Sirichote */#i nclude c:\mc5151io.h /* include i/o header file */ #i nclude c:\mc5151reg.hregister unsigned char j,flag1,temp; register unsigned int cw_n,ccw_n;unsigned char step[8]={0x80,0xc0,0x40,0x60,0x20,0x30,0x10,0x90} #define n 400/* flag1 mask byte 0x01 run cw() 0x02 run ccw() */main(){ flag1=0; serinit(9600); disable(); /* no need timer interrupt */ cw_n = n; /* initial step number for cw */ flag1 |=0x01; /* initial enable cw() */while(1){ { tick_wait(); /* wait for 10ms elapsed */energize(); /* round-robin execution the following tasks every 10ms */ cw(); ccw(); } }}cw(){ if((flag1&0x01)!=0) { cw_n--; /* decrement cw step number */ if (cw_n !=0) j++; /* if not zero increment index j */ else {flag1&=~0x01; /* disable cw() execution */ ccw_n = n; /* reload step number to ccw counter */ flag1 |=0x02; /* enable cww() execution */ } }

    标签: C2051 2051 89C AT

    上传时间: 2013-11-21

    上传用户:boyaboy

  • ADC单片机的应用

    ADC 单片机的应用随着数字化时代的来临,使得现代家庭的生活愈来愈便利。以前的洗衣机,有好几个旋钮,使用者只能选择几项功能,转来转去,操作非常麻烦;自从加上了单片机之后,我们可以发现,洗衣机的功能变强了,但是操作变简单了,只要按几下按钮,就等着洗完衣服。除了洗衣机之外,家里的冰箱、电磁炉、电子锅、热水瓶等电器产品也都渐渐走向了数字化。数字化有以下优点:一是容易操作和控制,另一个是可以使用单片机来控制其功能,使其功能增强及使用方便。自然界的各种信号,如温度、湿度、压力、光、声音、气体都是模拟信号,要对自然界里的信号做处理,就需要一个传感器将自然界的各种信号,转换成电压或是电流信号,再将这些模拟信号,通过一个模拟-数字转换器(ADC),转成数字信号,由单片机来对数字信号做处理。要是将ADC 内建于单片机中,则使用上更加便利,也可大幅度降低成本。将模拟信号数字化有利于处理、运算及显示,尤其是我们日常生活中的各种家电产品如:冷气机、除湿机、电冰箱、洗衣机、微波炉、电磁炉等,不胜枚举。

    标签: ADC 单片机

    上传时间: 2013-10-20

    上传用户:debuchangshi

  • 1A SIMPLE STEP-DOWN SWITCHING

    The TL2575 and TL2575HV represent superior alternatives to popular three-terminal linear regulators. Due totheir high efficiency, the devices significantly reduce the size of the heatsink and, in many cases, no heatsink isrequired. Optimized for use with standard series of inductors available from several different manufacturers, theTL2575 and TL2575HV greatly simplify the design of switch-mode power supplies by requiring a minimaladdition of only four to six external components for operation.

    标签: STEP-DOWN SWITCHING SIMPLE 1A

    上传时间: 2013-11-20

    上传用户:jelenecheung