water temperature control system uses the Single Chip Microcomputer to carry on temperature real-time gathering and controling. DS18B20, digitized temperature sensor, provides the temperature signal by "a main line". In -10～+85℃ the scope, DS18B20’s inherent measuring accuracy is 0.5 ℃. The water temperature real-time control system uses the electricity nichrome wire carring on temperature increiseament and operates the electric fan to realize the temperature decrease control. The system has the higher measuring accuracy and the control precision, it also can complete the elevation of temperature and the temperature decrease control.
标签： temperature Microcomputer real-tim control
上传时间： 2015-12-10
上传用户：nairui21
The 3850 group (spec.A QzROM version) is the 8-bit Microcomputer based on the 740 family core technology.
标签： Microcomputer the version family
上传时间： 2014-01-01
上传用户：ynwbosss
This program is a series of 51 single-chip Microcomputer simulation IIC bus, the memory of the 24 operations
标签： Microcomputer single-chip simulation the
上传时间： 2013-12-18
上传用户：yan2267246
一 摘要 单片计算机即单片微型计算机。（Single-Chip Microcomputer ）,是 集CPU ,RAM ,ROM , 定时，计数和多种接口于一体的微控制器。他体积小，成本低，功能强，广泛应用于智能产 品和工业自动化上。而51 单片机是各单片机中最为典型和最有代表性的一种。这次毕业设 计通过对它的学习，应用，从而达到学习、设计、开发软、硬的能力。 电信类的论文 毕业设计之用
标签： Microcomputer Single-Chip CPU RAM
上传时间： 2016-07-20
上传用户：hasan2015
【作者中文名】 杨继赢 【作者英文名】 YANG Ji-ying 【作者单位】 广东工业大学 【文献出处】 微计算机信息, Microcomputer Information, 编辑部邮箱 2008年 21期 期刊荣誉：中文核心期刊要目总览 ASPT来源刊 CJFD收录刊 【关键词】 智能终端 以太网 MIZILinux嵌入式操作系统 【英文关键词】 intelligent terminal Ethernet MIZI Linux Embedded OS 【摘要】 本文采用目前广泛应用的工业以太网为通讯方式,提出以ARM9开发板和MIZI Linux嵌入式操作系统为平台的通信设计方案。在掌握ARM9和MIZI Linux特点的基础上,构建MIZI Linux嵌入式操作系统下应用程序的软硬件开发平台。本方案采用DM9000芯片来控制以太网,在实现通讯模块调用的基础上,进行Linux下的Socket网络通信编程,实现智能终端的以太网通信功能。
标签： Microcomputer Information Ji-ying YANG
上传时间： 2013-12-21
上传用户：xc216
单片计算机即单片微型计算机。（Single-Chip Microcomputer ）,是 集CPU ,RAM ,ROM , 定时，计数和多种接口于一体的微控制器。他体积小，成本低，功能强，广泛应用于智能产 品和工业自动化上。而51 单片机是各单片机中最为典型和最有代表性的一种。这次毕业设 计通过对它的学习，应用，从而达到学习、设计、开发软、硬的能力。
标签： Microcomputer Single-Chip CPU RAM
上传时间： 2013-12-25
上传用户：stewart·
Microcomputer lcd12864 driver program
上传时间： 2013-07-25
上传用户：脚趾头
为了提高PCB板制作的效率，改变传统的化学腐蚀制板工艺，使用机械仿形铣制作电路板的方法，设计了以ATMEGA16单片机为核心部件的PCB板雕刻机控制系统。其中包括PCB雕刻机的基本功能、主要硬件电路设计和软件的实现流程，并给出了相关设计电路。重点分析了雕刻机步进电机的驱动电路以及主轴电机的驱动电路，该雕刻机经实际运行，系统工作良好，可有效提高PCB板的制作效率。 Abstract: In order to improve the efficiency of production of PCB board and change the traditional chemical etching plates， using of mechanical copying milling method makes circuit boards，this paper introduces the PCB engraving machine control system used ATMEGA16 Microcomputer as the core components. It includes basic function， the hardware circuit design and software realization process， and gives the corresponding circuit design.It analyses the drive circuit of engrawing machine stepper motor and spindle motor in detail. This engraving machine by practical operation， the system works well， which can effectively improve the production efficiency of PCB board.
上传时间： 2013-10-17
上传用户：liangliang123
便携式信号采集在机器健康诊断系统中有较高的应用价值。机器健康诊断的信号特点是包括低频信号。本文研究是为了实现简易而且低成本的低频便携式信号采集。以Microchip公司单片机PIC18F1320为核心设计信号采集电路，实现了信号的采集和保存。系统采用串行电可擦除芯片24LC32A保存数据，经过有线通信，信号数据由串行口通过MAX232芯片输送到微型计算机接收和保存，最后绘制出信号波形。 微型计算机程序采用Visual Basic编程。研究成功采样频率为3 kHz的复杂信号，证明该方案符合设计要求。 Abstract: Portable signal acquisition is useful in machine health monitoring systems. The signal characteristics of machine health monitoring includes low frequency signals. The goal of this study is to realize simple, inexpensive and portable low frequency signal sampling. This paper provides the project of signal acquisition system design based on PIC18F1320 microcontroller manufactured by the Microchip Technology Incorporation to achieve signal sampling and storage. The system adopted EEPROM 24LC32A to store the signal data. The Microcomputer received data via wired link with the MAX232 IC through the serial port. The Microcomputer program, programmed in Visual Basic, received the data, stored it and plotted the signal. The study successfully samples 3kHz complicated signals and thus meets the design requirement.
上传时间： 2013-11-19
上传用户：moerwang
实时时钟是微机保护装置的重要部件，在讨论PCF8583结构与功能的基础上，提出采用dsPIC33F系列微处理器与串行I2C时钟PCF8583的接口设计方案，给出了相应的接口电路与软件流程。该设计方案结构简单，可靠性高，开发周期短，具有一定的实用与参考价值。所设计的微机保护装置已投入现场运行，效果良好。 Abstract: Real-time clock chip is an important part in Microcomputer protection device.Based on discussing the structure and function of PCF8583，a new interface scheme which uses dsPIC33F microprocessor and serial clock chip（I2C）PCF8583is proposed.The method of the circuit design and the main software flow are introduced in this paper.The scheme has simple structure，higher reliability and shorter exploitation cycle，so has definite practicality or reference value.The Microcomputer protection device has been put into operation with better effects.
上传时间： 2013-11-18
上传用户：Thuan
