Free Space Optical Communication (FSOC) is an effective alternative technology to meet the Next Generation Network (NGN) demands as well as highly secured (mili- tary) communications. FSOC includes various advantages like last mile access, easy installation, free of Electro Magnetic Interference (EMI)/Electro Magnetic Compatibil- ity (EMC) and license free access etc. In FSOC, the optical beam propagation in the turbulentatmosphereisseverelyaffectedbyvariousfactorssuspendedinthechannel, geographicallocationoftheinstallationsite,terraintypeandmeteorologicalchanges. Therefore a rigorous experimental study over a longer period becomes significant to analyze the quality and reliability of the FSOC channel and the MAXimum data rate that the system can operate since data transmission is completely season dependent.
标签： Communication Optical System Space Free
上传时间： 2020-05-27
上传用户：shancjb
At the macroscopic level of system layout, the most important issue is path loss. In the older mobile radio systems that are limited by receiver noise, path loss determines SNR and the MAXimum coverage area. In cellular systems, where the limiting factor is cochannel interference, path loss determines the degree to which transmitters in different cells interfere with each other, and therefore the minimum separation before channels can be reused.
标签： Characteristics Channel Mobile
上传时间： 2020-05-30
上传用户：shancjb
Intensive development of digital technologies coincided in time with the beginning of the new era in telecommunications. It made possible to formalize many proce- dures of data exchange and to atomize some operations which made providing of serviceandmakeworkofmanytelecommunicationworkersmucheasier. Somenew telecommunication technologies were born out of the necessity for use of specific configurations of network elements and networks, as well as for a possibility of providing MAXimum characteristics of efficiency combined with high requirements to the stability of operation, the overcoming of different catastrophic situations and deadlockconditions,such as failuresand ”pending”of the networkandthe like. The thresholdbetweeninformationsystems andtelecommunicationsystems has become practically invisible. It resulted in such a new term as ”infocommunication”
上传时间： 2020-06-01
上传用户：shancjb
基于TMS320F2812 光伏并网发电模拟装置PROTEL设计原理图+PCB+软件源码+WORD论文文档,硬件采用2层板设计，PROTEL99SE 设计的工程文件，包括完整的原理图和PCB文件，可以做为你的学习设计参考。 摘要：本文实现了一个基于TMS320F2812 DSP芯片的光伏并网发电模拟装置，采用直流稳压源和滑动变阻器来模拟光伏电池。通过TMS320F2812 DSP芯片ADC模块实时采样模拟电网电压的正弦参考信号、光伏电池输出电压、负载电压电流反馈信号等。经过数据处理后，用PWM模块产生实时的SPWM 波，控制MOSFET逆变全桥输出正弦波。本文用PI控制算法实现了输出信号对给定模拟电网电压的正弦参考信号的频率和相位跟踪，用恒定电压法实现了光伏电池最大功率点跟踪（MPPT），从而达到模拟并网的效果。另外本装置还实现了光伏电池输出欠压、负载过流保护功能以及光伏电池输出欠压、过流保护自恢复功能、声光报警功能、孤岛效应的检测、保护与自恢复功能。系统测试结果表明本设计完全满定设计要求。关键词：光伏并网，MPPT，DSP Photovoltaic Grid-connected generation simulator Zhangyuxin，Tantiancheng，Xiewuyang(College of Electrical Engineering, Chongqing University)Abstract: This paper presents a photovoltaic grid-connected generation simulator which is based on TMS320F2812 DSP, with a DC voltage source and a variable resistor to simulate the characteristic of photovoltaic cells. We use the internal AD converter to real-time sampling the referenced grid voltage signal, outputting voltage of photovoltaic, feedback outputting voltage and current signal. The PWM module generates SVPWM according to the calculation of the real-time sampling data, to control the full MOSFET inverter bridge output sine wave. We realized that the output voltage of the simulator can track the frequency and phase of the referenced grid voltage with PI regulation, and the MAXimum photovoltaic power tracking with constant voltage regulation, thereby achieved the purpose of grid-connected simulation. Additionally, this device has the over-voltage and over-current protection, audible and visual alarm, islanding detecting and protection, and it can recover automatically. The testing shows that our design is feasible.Keywords: Photovoltaic Grid-connected，MPPT，DSP 目录引言 11. 方案论证 11.1. 总体介绍 11.2. 光伏电池模拟装置 11.3. DC-AC逆变桥 11.4. MOSFET驱动电路方案 21.5. 逆变电路的变频控制方案 22. 理论分析与计算 22.1. SPWM产生 22.1.1. 规则采样法 22.1.2. SPWM 脉冲的计算公式 32.1.3. SPWM 脉冲计算公式中的参数计算 32.1.4. TMS320F2812 DSP控制器的事件管理单元 42.1.5. 软件设计方法 62.2. MPPT的控制方法与参数计算 72.3. 同频、同相的控制方法和参数计算 8
标签： tms320f2812 光伏 并网发电 模拟 protel pcb
上传时间： 2021-11-02
上传用户：
ICN6201/02 is a bridge chip which receives MIPI® DSI inputs and sends LVDS outputs. MIPI® DSI supports up to 4 lanes and each lane operates at 1Gbps MAXimum; the totally MAXimum input bandwidth is 4Gbps; and the MIPI defined ULPS(ultra-low-power state) is also supported. ICN6201 decodes MIPI® DSI 18bepp RGB666 and 24bpp RGB888 packets.The LVDS output 18 or 24 bits pixel with 25MHz to 154MHz, by VESA or JEIDA format.ICN6201/02 support video resolution up to FHD (1920x1080) and WUXGA (1920x1200).ICN6201 adopts QFN48 package and ICN6202 adopts QFN40 package
标签： icn6202
上传时间： 2022-06-10
上传用户：kingwide
The information disclosed to you hereunder (the Materials ) is provided solely for the selection and use of Xilinx products. To the MAXimum extent permitted by applicable law: (1) Materials are made available"AS IS"and with all faults, Xilinx hereby DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR ST ATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether in contract or tort. includina nealigence. or under anv other theorv of liabilitv) for any loss or damage of any kind or nature related to, arising under, or in connection with, the Materials (including vour use of the Materials), including for any direct, indirect, special, incidental, or consequential loss or damage (including loss of data, profits, qoodwill, or any type of loss or damage suffered as a result of anv action brought by a third party)
上传时间： 2022-06-18
上传用户：
在光伏发电系统中，光伏电池的利用率除了与光伏电池的内部特性有关外，还受使用环境如辐照度、负载和温度等因素的影响。在不同的外界条件下，光伏电池可运行在不同且惟一的最大功率点（MAXimum Power Point，MPP）上，因此，对于光伏发电系统来说，应该寻求光伏电池的最优工作状态，以最大限度地将光能转化为电能，即需要采用最大功率点跟踪（MAXimum Power Point Tracking，MPPT）技术.本文根据光伏电池最大输出功率与光照度的关系，建立了基于Boost电路的MPPT仿真模型，采用扰动观测法，通过调整DC-DC电路的占空比实现了最大功率点追踪。使用Matlab/Simulink 工具，在辐照度恒定和阶跃变化的情况下，对MPPT进行了仿真分析。1光伏电池的特性光伏电池实际上就是一个大面积平面二极管，其工作可以图1的单二极管等效电路来描述1，光伏电池的特性方程如式（1）所示。
上传时间： 2022-06-21
上传用户：
化石能源日趋枯竭，核能发展受限，能源问题愈来愈成为全人类所不可避免的一个严峻挑战。光伏发电技术是太阳能利用的主要形式。基于提高太阳能转换效率的最大功率点跟踪（MAXimum power point tracking，简称MPPT）的提出与应用为光伏发电系统的优化利用提供了坚实的基础。本文针对MPPT技术开展了细致的工作计划，完成了以MPPT控制器为核心的光伏发电系统设计和仿真，较好地解决了能量转换低下的问题。首先，总体介绍了光伏发电系统。其次，阐述了光伏发电系统基本原理。然后就MPPT控制器的实现部分-DCDC变换电路，阐述了电路CCM工作模式，利用两种方法对Buck和Boost电路进行了建模和仿真分析.Boost电路设计简便、可升压，且能够保证一直工作于CCM下，具有更实用的特点，更进一步地，说明了传统MPPT算法的实现原理和控制流程，仿真研究表明改进型变步长扰动观察法在光强变化时具有较好的跟踪控制性能，但是温度变化时跟踪效果差。针对传统算改进型扰动观察发法不能很好地响应环境的变化同时存在严重振荡，偏差较大的情况，提出一种人工智能控制方法--模糊控制法，进行系统分析，模糊控制规则确定以及FIS编辑器参数设置等，完成了系统的设计。最后搭建出光伏发电MPPT人工智能控制系统的仿真模型，设置相关参数。通过仿真结果的比较和分析验证了模糊控制法的有效性和可行性。
上传时间： 2022-06-21
上传用户：
The following table covers the main features offered by the MT7628KN and MT7628AN. Overall, the MT7628KN supports the requirements of an entry level AP/router, while the more advanced MT7628AN supports a number of interfaces together with a large MAXimum RAM capacity.Features· Embedded MIPS24KEc (575/580 MHz) with 64KBl-Cache and 32KB D-Cache·2T2R 2.4GHz with 300 Mbps PHY data rate· Legacy 802.11b/g and HT 802.11n modes·20/40 MHz channel bandwidth· Reverse Data Grant(RDG)· Maximal Ratio Combining(MRC)· Space Time Block Coding(STBC)· MCM 8 Mbytes DDR1 KGD(MT7628KN)·16-bit DDR1/2 up to 128/256 Mbytes(MT7628AN/KN)· SPI/SD-XC/eMMC·x1 USB 2.0 Host,x1 Ple Root Complex·5-port 10/100 FE PHY
标签： mt7628
上传时间： 2022-07-25
上传用户：
此强而有力的工具将会增加网站联机速度。它最佳化了操作系统的设定及连结。Amplify修改了MTU(MAXimum Transmission Unit)、RWIN(Receive Window)，TTL(Time to Live)、PMTU's(Path MAXimum Transmission Unit)。这些改改将的减少数据处理的分割次数，可以将资料快速的呈现在使用者面前。
标签：
上传时间： 2013-06-29
上传用户：eeworm
