是否要先打开ALLEGRO? 不需要(当然你的机器须有CADENCE系统)。生成完封装后在你的输出目录下就会有几千个器件（全部生成的话）,默认输出目录为c:\MySym\. Level里面的Minimum, Nominal, Maximum 是什么意思？ 对应ipc7351A的ABC封装吗？ 是的 能否将MOST, NOMINAL, LEAST三种有差别的封装在命名上也体现出差别？ NOMINAL 的名称最后没有后缀，MOST的后缀自动添加“Ｍ”，LEAST的后缀自动添加“L”，你看看生成的库名称就知道了。（直插件以及特别的器件，如BGA等是没有MOST和LEAST级别的，对这类器件只有NOMINAL） IC焊盘用长方形好像比用椭圆形的好，能不能生成长方形的？ 嗯。。。。基本上应该是非直角的焊盘比矩形的焊盘好，我记不得是AMD还是NS还是AD公司专门有篇文档讨论了这个问题，如果没有记错的话至少有以下好处：信号质量好、更省空间（特别是紧密设计中）、更省锡量。我过去有一篇帖子有一个倒角焊盘的SKILL，用于晶振电路和高速器件（如DDR的滤波电容)，原因是对宽度比较大的矩形用椭圆焊盘也不合适，这种情况下用自定义的矩形倒角焊盘就比较好了－－－你可以从网上另外一个DDR设计的例子中看到。 当然，我已经在程序中添加了一选择项，对一些矩形焊盘可以选择倒角方式. 刚才试了一下，感觉器件的命名的规范性不是太好，另好像不能生成器件的DEVICE文件，我没RUN完。。。 这个程序的命名方法基本参照IPC-7351，每个人都有自己的命名嗜好，仍是不好统一的；我是比较懒的啦，所以就尽量靠近IPC-7351了。 至于DEVICE，的选项已经添加 (这就是批量程序的好处，代码中加一行，重新生产的上千上万个封装就都有新东西了)。 你的库都是"-"的,请问用过ALLEGRO的兄弟,你们的FOOTPRINT认"-"吗?反正我的ALLEGRO只认"_"(下划线) 用“－”应该没有问题的，焊盘的命名我用的是"_"（这个一直没改动过）。 部分丝印画在焊盘上了。 丝印的问题我早已知道，只是尽量避免开（我有个可配置的SilkGap变量）,不过工作量比较大，有些已经改过，有些还没有；另外我没有特别费功夫在丝印上的另一个原因是，我通常最后用AUTO-SILK的来合并相关的层，这样既方便快捷也统一各个器件的丝印间距，用AUTO-SILK的话丝印线会自动避开SOLDER-MASK的。 点击allegro后命令行出现E- Can't change to directory: Files\FPM，什么原因？ 我想你一定是将FPM安装在一个含空格的目录里面了，比如C:\Program Files\等等之类，在自定义安装目录的时候该目录名不能含有空格，且存放生成的封装的目录名也不能含有空格。你如果用默认安装的话应该是不会有问题的, 默认FPM安装在C:\FPM，默认存放封装的目录为C:\MYSYM 0.04版用spb15.51生成时.allegro会死机.以前版本的Allegro封装生成器用spb15.51生成时没有死机现象 我在生成MELF类封装的时候有过一次死机现象，估计是文件操作错误导致ALLEGRO死机，原因是我没有找到在ｓｋｉｌｌ里面直接生成SHAPE焊盘的方法（FLASH和常规焊盘没问题）, 查了下资料也没有找到解决方法，所以只得在外部调用SCRIPT来将就一下了。（下次我再查查看），用SCRIPT的话文件访问比较频繁（幸好目前MELF类的器件不多）. 解决办法： １、对MELF类器件单独选择生成，其它的应该可以一次生成。 ２、试试最新的版本(当前0.05) 请说明运行在哪类器件的时候ALLEGRO出错，如果不是在MELF附近的话，请告知，谢谢。 用FPM0.04生成的封装好像文件都比较大，比如CAPC、RES等器件，都是300多K，而自己建的或采用PCB Libraries Eval生成的封装一般才几十K到100K左右，不知封装是不是包含了更多的信息？ 我的每个封装文件包含了几个文字层（REF,VAL,TOL,DEV,PARTNUMBER等),SILK和ASSEM也是分开的，BOND层和高度信息，还有些定位线(在DISP层）,可能这些越来越丰富的信息加大了生成文件的尺寸.你如果想看有什么内容的话，打开所有层就看见了（或REPORT） 非常感谢 LiWenHui 发现的BUG, 已经找到原因，是下面这行： axlDBChangeDesignExtents( '((-1000 -1000) (1000 1000))) 有尺寸空间开得太大，后又没有压缩的原因，现在生成的封装也只有几十K了，0.05版已经修复这个BUG了。 Allegro封装生成器0.04生成do-27封装不正确,生成封装的焊盘的位号为a,c.应该是A,B或者1,2才对. 呵呵，DIODE通常管脚名为AC(A = anode, C = cathode) 也有用AK 或 12的， 极少见AB。 除了DIODE和极个别插件以及BGA外，焊盘名字以数字为主, 下次我给DIODE一个选择项，可以选择AC 或 12 或 AK, 至于TRANSISTER我就不去区分BCE/CBE/ECB/EBC/GDS/GSD/DSG/DGS/SGD/SDG等了，这样会没完没了的，我将对TRANSISTER强制统一以数字编号了，如果用家非要改变，只得在生成库后手工修改。
标签： Footprint Maker 0.08 FPM skill
上传时间： 2018-01-10
上传用户：digitzing
AEC-Q100 qualified • 12 V and 24 V battery systems compliance • 3.3 V and 5 V logic compatible I/O • 8-channel configurable MOSFET pre-driver – High-side (N-channel and P-channel MOS) – Low-side (N-channel MOS) – H-bridge (up to 2 H-bridge) – Peak & Hold (2 loads) • Operating battery supply voltage 3.8 V to 36 V • Operating VDD supply voltage 4.5 V to 5.5 V • All device pins, except the ground pins, withstand at least 40 V • Programmable gate charge/discharge currents for improving EMI behavior
标签： configurable Automotive pre-driver suitable channel systems MOSFET fully High side
上传时间： 2019-03-27
上传用户：guaixiaolong
function [R,k,b] = msc(A) % 多元散射校正 % 输入待处理矩阵，通过多元散射校正，求得校正后的矩阵 %% 获得矩阵行列数 [m,n] = size(A); %% 求平均光谱 M = mean(A,2); %% 利用最小二乘法求每一列的斜率k和截距b for i = 1:n a = polyfit(M,A(:,i),1); if i == 1 k = a(1); b = a(2); else k = [k,a(1)]; b = [b,a(2)]; end end %% 求得结果 for i = 1:n Ai = (A(:,i)-b(i))/k(i); if i == 1 R = Ai; else R = [R,Ai]; end end
上传时间： 2020-03-12
上传用户：15275387185
Homogeneous Partitioning of the Surveillance Volume discusses the implementation of the first of three sequentially complementary approaches for increasing the probability of target detection within at least some of the cells of the surveillance volume for a spatially nonGaussian or Gaussian “noise” environment that is temporally Gaussian. This approach, identified in the Preface as Approach A, partitions the surveillance volume into homogeneous contiguous subdivisions.
标签： Receivers Adaptive Antennas and
上传时间： 2020-05-26
上传用户：shancjb
The term economics is generally understood to mean sound management. This is associated with openness, good faith, accurate figures and integrity in company accounts, with transparency ensured through satisfactory standards of good practice in relation to investors and the clients who have placed their trust in an organization’s managers.
标签： Communication Networks Economy
上传时间： 2020-05-26
上传用户：shancjb
It is more than a decade since GSM was first commercially available. After some unexpected delay, it seems that finally UMTS is here to stay as a 3G system standardised by 3GPP, at least for another ten years. UMTS will enable multi-service, multi-rate and flexible IP native-based mobile technologies to be used in wide area scenarios and also pave the way for a smooth transition from circuit switched voice networks to mobile packet services.
标签： Management Strategies Resource Radio
上传时间： 2020-06-01
上传用户：shancjb
The first gem of wisdom I ever acquired about consulting, obtained many years ago from a former schoolmate, was to ensure that everything is plugged in: no continuity, no data. Wires carry voltages and currents from one place to another. Their behavior is reasonably simple and predictable—at least for sufficiently low data rates and short lengths—and they can be seen, grabbed, traced, and tugged.
标签： RF Engineering
上传时间： 2020-06-01
上传用户：shancjb
This paper presents a Hidden Markov Model (HMM)-based speech enhancement method, aiming at reducing non-stationary noise from speech signals. The system is based on the assumption that the speech and the noise are additive and uncorrelated. Cepstral features are used to extract statistical information from both the speech and the noise. A-priori statistical information is collected from long training sequences into ergodic hidden Markov models. Given the ergodic models for the speech and the noise, a compensated speech-noise model is created by means of parallel model combination, using a log-normal approximation. During the compensation, the mean of every mixture in the speech and noise model is stored. The stored means are then used in the enhancement process to create the most likely speech and noise power spectral distributions using the forward algorithm combined with mixture probability. The distributions are used to generate a Wiener filter for every observation. The paper includes a performance evaluation of the speech enhancer for stationary as well as non-stationary noise environment.
标签： Telecommunications Processing Signal for
上传时间： 2020-06-01
上传用户：shancjb
Telecommunications is today widely understood to mean the electrical means of communicating over a distance. The first form of telecommunications was that of the Telegraph, which was invented quite independently in 1837 by two scientists, Wheatstone and Morse. Telegraphy was on a point-to-point unidirectional basis and relied on trained operators to interpret between the spoken or written word and the special signals sent over the telegraph wire. However, the use of telegraphy did greatly enhance the operations of railways and, of course, the dissemination of news and personal messages between towns.
标签： Telecommunications Understanding Networks
上传时间： 2020-06-01
上传用户：shancjb
This is a book on wireless communication. That usually means communica- tion by radio, though ultrasound and infrared light are also used occasion- ally. The term “wireless” has come to mean nonbroadcast communication, usually between individuals who very often use portable or mobile equip- ment. The term is rather vague, of course, and there are certainly borderline applications that are called wireless without falling exactly into the above definition.
标签： Communication Technology Wireless
上传时间： 2020-06-01
上传用户：shancjb
