Atheros无线芯片AR-6000系列wince 6驱动源代码(这东西我也没用过别问我,我是搜别的wince资源搜到的) AR6K SDIO support. Requires firmware 1.1 on SD13 cards. readme: Atheros Communications AR6001 WLAN Driver for SDIO installation Read Me March 26,2007 (based on k14 fw1.1) Windows CE Embedded CE 6.0 driver installation. 1. Unzip the installation file onto your system (called installation directory below) 2. Create an OS design or open an existing OS design in Platform Builder 6.0. a. The OS must support the SD bus driver and have an SD Host Controller driver (add these from Catalog Items). b. Run image size should be set to allow greater than 32MB. 3. a. From the Project menu select Add Existing Subproject... b. select AR6K_DRV.pbxml c. select open This should create a subproject within your OS Design project for the AR6K_DRV driver. 4. Build the solution. 转自Tony嵌入式,原文地址：http://www.cevx.com/bbs/dispbbs.asp?boardID=4&ID=11762&page=1
标签： wince Requires firmware Atheros
上传时间： 2014-11-11
上传用户：bibirnovis
主要介绍了如何使用E8仿真器在以Renesas芯片为MCU的开发板上进行仿真调试。 第1 章 概要 第2 章 E8 仿真器功能 第3 章 使用前的准备 第4 章 调试的准备 第5 章 调试 第6 章 教程示例 附录A E8 仿真器的构成 附录B 窗口功能一览 附录C 命令行功能 附录D High-performance Embedded Workshop 的注意事项 附录E 有关硬件诊断程序 E.1 为了执行诊断程序的系统设置 E.2 诊断程序的执行 E.3 错误发生时的处理
上传时间： 2013-12-26
上传用户：chens000
Atheros Communications AR6001 WLAN Driver for SDIO installation Read Me March 26,2007 (based on k14 fw1.1) Windows CE Embedded CE 6.0 driver installation. 1. Unzip the installation file onto your system (called installation directory below) 2. Create an OS design or open an existing OS design in Platform Builder 6.0. a. The OS must support the SD bus driver and have an SD Host Controller driver (add these from Catalog Items). b. Run image size should be set to allow greater than 32MB. 3. a. From the Project menu select Add Existing Subproject... b. select AR6K_DRV.pbxml c. select open This should create a subproject within your OS Design project for the AR6K_DRV driver. 4. Build the solution.
标签： Communications installation Atheros Driver
上传时间： 2016-10-27
上传用户：hebmuljb
AR6001 WLAN Driver for SDIO installation Read Me March 26,2007 (based on k14 fw1.1) Windows CE Embedded CE 6.0 driver installation. 1. Unzip the installation file onto your system (called installation directory below) 2. Create an OS design or open an existing OS design in Platform Builder 6.0. a. The OS must support the SD bus driver and have an SD Host Controller driver (add these from Catalog Items). b. Run image size should be set to allow greater than 32MB. 3. a. From the Project menu select Add Existing Subproject... b. select AR6K_DRV.pbxml c. select open This should create a subproject within your OS Design project for the AR6K_DRV driver. 4. Build the solution.
标签： installation Windows Driver March
上传时间： 2014-09-06
上传用户：yuzsu
/* ********************************************************************************************************* * uC/TCP-IP V2 * The Embedded TCP/IP Suite * * (c) Copyright 2003-2010; Micrium, Inc.; Weston, FL * * All rights reserved. Protected by international copyright laws. * * uC/TCP-IP is provided in source form to registered licensees ONLY. It is * illegal to distribute this source code to any third party unless you receive * written permission by an authorized Micrium representative. Knowledge of * the source code may NOT be used to develop a similar product. * * Please help us continue to provide the Embedded community with the finest * software available. Your honesty is greatly appreciated. * * You can contact us at www.micrium.com. ********************************************************************************************************* */ /* ********************************************************************************************************* * * NETWORK TCP LAYER * (TRANSMISSION CONTROL PROTOCOL) * * Filename : net_tcp.h * Version : V2.10 * Programmer(s) : ITJ ********************************************************************************************************* * Note(s) : (1) Supports Transmission Control Protocol as described in RFC #793 with the following * restrictions/constraints : * * (a) TCP Security & Precedence NOT supported RFC # 793, Section 3.6 * * (b) TCP Urgent Data NOT supported RFC # 793, Section 3.7 * 'The Communication of * Urgent Information' * * (c) The following TCP options NOT supported : * * (1) Window Scale RFC #1072, Section 2 * RFC #1323, Section 2 * (2) Selective Acknowledgement (SACK) RFC #1072, Section 3 * RFC #2018 * RFC #2883 * (3) TCP Echo RFC #1072, Section 4 * (4) Timestamp RFC #1323, Section 3.2 * (5) Protection Against Wrapped Sequences (PAWS) RFC #1323, Section 4 * * (d) #### IP-Options-to-TCP-Connection RFC #1122, Section 4.2.3.8 * Handling NOT supported * * (e) #### ICMP-Error-Message-to-TCP-Connection RFC #1122, Section 4.2.3.9 * Handling NOT currently supported * * (2) TCP Layer assumes/requires Network Socket Layer (see 'net_sock.h MODULE Note #1a2'). ********************************************************************************************************* */ /*$PAGE*/ /* ********************************************************************************************************* * MODULE * * Note(s) : (1) TCP Layer module is NOT required for UDP-to-Application API configuration. * * See also 'net_cfg.h TRANSPORT LAYER CONFIGURATION' * & 'net_cfg.h USER DATAGRAM PROTOCOL LAYER CONFIGURATION'. * * See also 'net_tcp.h Note #2'. * * (2) The following TCP-module-present configuration value MUST be pre-#define'd in * 'net_cfg_net.h' PRIOR to all other network modules that require TCP Layer * configuration (see 'net_cfg_net.h TCP LAYER CONFIGURATION Note #2b') : * * NET_TCP_MODULE_PRESENT ********************************************************************************************************* */ #ifdef NET_TCP_MODULE_PRESENT /* See Note #2. */ /* ********************************************************************************************************* * EXTERNS ********************************************************************************************************* */ #if ((defined(NET_TCP_MODULE)) && \ (defined(NET_GLOBALS_EXT))) #define NET_TCP_EXT #else #define NET_TCP_EXT extern #endif /*$PAGE*/ /* ********************************************************************************************************* * DEFINES ********************************************************************************************************* */ /* ********************************************************************************************************* * TCP HEADER DEFINES * * Note(s) : (1) The following TCP value MUST be pre-#define'd in 'net_def.h' PRIOR to 'net_buf.h' so that * the Network Buffer Module can configure maximum buffer header size (see 'net_def.h TCP * LAYER DEFINES' & 'net_buf.h NETWORK BUFFER INDEX & SIZE DEFINES Note #1') : * * (a) NET_TCP_HDR_SIZE_MAX 60 (NET_TCP_HDR_LEN_MAX * * NET_TCP_HDR_LEN_WORD_SIZE) * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_LEN_MASK 0xF000u #define NET_TCP_HDR_LEN_SHIFT 12u #define NET_TCP_HDR_LEN_NONE 0u #define NET_TCP_HDR_LEN_MIN 5u #define NET_TCP_HDR_LEN_MAX 15u #define NET_TCP_HDR_LEN_WORD_SIZE CPU_WORD_SIZE_32 #define NET_TCP_HDR_SIZE_MIN (NET_TCP_HDR_LEN_MIN * NET_TCP_HDR_LEN_WORD_SIZE) #if 0 /* See Note #1a. */ #define NET_TCP_HDR_SIZE_MAX (NET_TCP_HDR_LEN_MAX * NET_TCP_HDR_LEN_WORD_SIZE) #endif #define NET_TCP_HDR_SIZE_TOT_MIN (NET_IP_HDR_SIZE_TOT_MIN + NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_SIZE_TOT_MAX (NET_IP_HDR_SIZE_TOT_MAX + NET_TCP_HDR_SIZE_MAX) #define NET_TCP_PSEUDO_HDR_SIZE 12u /* = sizeof(NET_TCP_PSEUDO_HDR) */ #define NET_TCP_PORT_NBR_RESERVED NET_PORT_NBR_RESERVED #define NET_TCP_PORT_NBR_NONE NET_TCP_PORT_NBR_RESERVED #define NET_TCP_HDR_URG_PTR_NONE 0x0000u /* See Note #2. */ /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER FLAG DEFINES * * Note(s) : (1) See 'TCP HEADER Note #2' for flag fields. * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_FLAG_MASK 0x0FFFu #define NET_TCP_HDR_FLAG_NONE DEF_BIT_NONE #define NET_TCP_HDR_FLAG_RESERVED 0x0FE0u /* MUST be '0'. */ #define NET_TCP_HDR_FLAG_URGENT DEF_BIT_05 /* See Note #2. */ #define NET_TCP_HDR_FLAG_ACK DEF_BIT_04 #define NET_TCP_HDR_FLAG_PUSH DEF_BIT_03 #define NET_TCP_HDR_FLAG_RESET DEF_BIT_02 #define NET_TCP_HDR_FLAG_SYNC DEF_BIT_01 #define NET_TCP_HDR_FLAG_FIN DEF_BIT_00 #define NET_TCP_HDR_FLAG_CLOSE NET_TCP_HDR_FLAG_FIN /* ********************************************************************************************************* * TCP FLAG DEFINES ********************************************************************************************************* */ /* ------------------ NET TCP FLAGS ------------------- */ #define NET_TCP_FLAG_NONE DEF_BIT_NONE #define NET_TCP_FLAG_USED DEF_BIT_00 /* TCP conn cur used; i.e. NOT in free TCP conn pool. */ /* ------------------ TCP TX FLAGS ------------------- */ /* TCP tx flags copied from TCP hdr flags. */ #define NET_TCP_FLAG_TX_FIN NET_TCP_HDR_FLAG_FIN #define NET_TCP_FLAG_TX_CLOSE NET_TCP_FLAG_TX_FIN #define NET_TCP_FLAG_TX_SYNC NET_TCP_HDR_FLAG_SYNC #define NET_TCP_FLAG_TX_RESET NET_TCP_HDR_FLAG_RESET #define NET_TCP_FLAG_TX_PUSH NET_TCP_HDR_FLAG_PUSH #define NET_TCP_FLAG_TX_ACK NET_TCP_HDR_FLAG_ACK #define NET_TCP_FLAG_TX_URGENT NET_TCP_HDR_FLAG_URGENT #define NET_TCP_FLAG_TX_BLOCK DEF_BIT_07 /* ------------------ TCP RX FLAGS ------------------- */ #define NET_TCP_FLAG_RX_DATA_PEEK DEF_BIT_08 #define NET_TCP_FLAG_RX_BLOCK DEF_BIT_15 /*$PAGE*/ /* ********************************************************************************************************* * TCP TYPE DEFINES * * Note(s) : (1) NET_TCP_TYPE_&&& #define values specifically chosen as ASCII representations of the TCP * types. Memory displays of TCP types will display with their chosen ASCII names. ********************************************************************************************************* */ /* ------------------ NET TCP TYPES ------------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x20504354u /* "TCP " in ASCII. */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x43542050u /* "TCP " in ASCII. */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #endif #endif /* ********************************************************************************************************* * TCP SEQUENCE NUMBER DEFINES * * Note(s) : (1) TCP initial transmit sequence number is incremented by a fixed value, preferably a large * prime value or a large value with multiple unique factors. * * (a) One reasonable TCP initial transmit sequence number increment value example : * * 65527 = 37 * 23 * 11 * 7 * * * #### NET_TCP_TX_SEQ_NBR_CTR_INC could be developer-configured in 'net_cfg.h'. * * See also 'NET_TCP_TX_GET_SEQ_NBR() Notes #1b2 & #1c2'. ********************************************************************************************************* */ #define NET_TCP_SEQ_NBR_NONE 0u #define NET_TCP_ACK_NBR_NONE NET_TCP_SEQ_NBR_NONE #define NET_TCP_TX_SEQ_NBR_CTR_INC 65527u /* See Note #1. */ #define NET_TCP_ACK_NBR_DUP_WIN_SIZE_SCALE 4 /*$PAGE*/ /* ********************************************************************************************************* * TCP DATA/TOTAL LENGTH DEFINES * * Note(s) : (1) (a) TCP total length #define's (NET_TCP_TOT_LEN) relate to the total size of a complete * TCP packet, including the packet's TCP header. Note that a complete TCP packet MAY * be fragmented in multiple Internet Protocol packets. * * (b) TCP data length #define's (NET_TCP_DATA_LEN) relate to the data size of a complete * TCP packet, equal to the total TCP packet length minus its TCP header size. Note * that a complete TCP packet MAY be fragmented in multiple Internet Protocol packets. ********************************************************************************************************* */ /* See Notes #1a & #1b. */ #define NET_TCP_DATA_LEN_MIN 0u #define NET_TCP_TOT_LEN_MIN (NET_TCP_HDR_SIZE_MIN + NET_TCP_DATA_LEN_MIN) #define NET_TCP_TOT_LEN_MAX (NET_IP_TOT_LEN_MAX - NET_IP_HDR_SIZE_MIN ) #define NET_TCP_DATA_LEN_MAX (NET_TCP_TOT_LEN_MAX - NET_TCP_HDR_SIZE_MIN) /*$PAGE*/ /* ********************************************************************************************************* * TCP SEGMENT SIZE DEFINES * * Note(s) : (1) (a) RFC # 879, Section 3 states that the TCP Maximum Segment Size "counts only * data octets in the segment, ... not the TCP header or the IP header". * * (b) RFC #1122, Section 4.2.2.6 requires that : * * (1) "The MSS value to be sent in an MSS option must be less than or equal to * * (A) MMS_R - 20 * * where MMS_R is the maximum size for a transport-layer message that can * be received." * * (2) "If an MSS option is not received at connection setup, TCP MUST assume a * default send MSS of 536 (576 - 40)." * * See also 'net_ip.h IP DATA/TOTAL LENGTH DEFINES Note #1'. ********************************************************************************************************* */ /* See Note #1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT (NET_IP_MAX_DATAGRAM_SIZE_DFLT - NET_IP_HDR_SIZE_MIN - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_MAX_SEG_SIZE_DFLT_RX NET_TCP_DATA_LEN_MAX /* See Note #1b1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT_TX NET_TCP_MAX_SEG_SIZE_DFLT /* See Note #1b2. */ #define NET_TCP_MAX_SEG_SIZE_NONE 0u #define NET_TCP_MAX_SEG_SIZE_MIN NET_TCP_MAX_SEG_SIZE_DFLT #define NET_TCP_MAX_SEG_SIZE_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_MIN NET_TCP_DATA_LEN_MIN #define NET_TCP_SEG_LEN_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_SYNC 1u #define NET_TCP_SEG_LEN_FIN 1u #define NET_TCP_SEG_LEN_CLOSE NET_TCP_SEG_LEN_FIN #define NET_TCP_SEG_LEN_ACK 0u #define NET_TCP_SEG_LEN_RESET 0u #define NET_TCP_SEG_LEN_PROBE 0u #define NET_TCP_DATA_LEN_TX_SYNC 0u #define NET_TCP_DATA_LEN_TX_FIN 0u #define NET_TCP_DATA_LEN_TX_CLOSE NET_TCP_DATA_LEN_TX_FIN #define NET_TCP_DATA_LEN_TX_ACK 0u #define NET_TCP_DATA_LEN_TX_PROBE_NO_DATA 0u #define NET_TCP_DATA_LEN_TX_PROBE_DATA 1u #define NET_TCP_DATA_LEN_TX_RESET 0u #define NET_TCP_TX_PROBE_DATA 0x00u /* ********************************************************************************************************* * TCP WINDOW SIZE DEFINES * * Note(s) : (1) Although NO RFC specifies the absolute minimum TCP connection window size value allowed, * RFC #793, Section 3.7 'Data Communication : Managing the Window' states that for "the * window ... there is an assumption that this is related to the currently available data * buffer space available for this connection". ********************************************************************************************************* */ #define NET_TCP_WIN_SIZE_NONE 0u #define NET_TCP_WIN_SIZE_MIN NET_TCP_MAX_SEG_SIZE_MIN #define NET_TCP_WIN_SIZE_MAX DEF_INT_16U_MAX_VAL /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER OPTIONS DEFINES * * Note(s) : (1) See the following RFC's for TCP options summary : * * (a) RFC # 793, Section 3.1 'Header Format : Options' * (b) RFC #1122; Sections 4.2.2.5, 4.2.2.6 * * (2) TCP option types are encoded in the first octet for each TCP option as follows : * * -------- * | TYPE | * -------- * * The TCP option type value determines the TCP option format : * * (a) The following TCP option types are single-octet TCP options -- i.e. the option type * octet is the ONLY octet for the TCP option. * * (1) TYPE = 0 End of Options List * (2) TYPE = 1 No Operation * * * (b) All other TCP options MUST be multi-octet TCP options (see RFC #1122, Section 4.2.2.5) : * * ------------------------------ * | TYPE | LEN | TCP OPT | * ------------------------------ * * where * TYPE Indicates the specific TCP option type * LEN Indicates the total TCP option length, in octets, including * the option type & the option length octets * TCP OPT Additional TCP option octets, if any, that contain the remaining * TCP option information * * The following TCP option types are multi-octet TCP options where the option's second * octet specify the total TCP option length, in octets, including the option type & the * option length octets : * * (1) TYPE = 2 Maximum Segment Size See RFC # 793, Section 3.1 'Header Format : * Options : Maximum Segment Size'; * RFC #1122, Section 4.2.2.6; * RFC # 879, Section 3 * * (2) TYPE = 3 Window Scale See 'net_tcp.h Note #1c1' * (3) TYPE = 4 SACK Allowed See 'net_tcp.h Note #1c2' * (4) TYPE = 5 SACK Option See 'net_tcp.h Note #1c2' * (5) TYPE = 6 Echo Request See 'net_tcp.h Note #1c3' * (6) TYPE = 7 Echo Reply See 'net_tcp.h Note #1c3' * (7) TYPE = 8 Timestamp See 'net_tcp.h Note #1c4' * * (3) TCP header allows for a maximum option list length of 40 octets : * * NET_TCP_HDR_OPT_SIZE_MAX = NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN * * = 60 - 20 * * = 40 * * (4) 'NET_TCP_OPT_SIZE' MUST be pre-defined PRIOR to all definitions that require TCP option * size data type. ********************************************************************************************************* */ /*$PAGE*/ #define NET_TCP_HDR_OPT_END_LIST 0u #define NET_TCP_HDR_OPT_NOP 1u #define NET_TCP_HDR_OPT_MAX_SEG_SIZE 2u #define NET_TCP_HDR_OPT_WIN_SCALE 3u #define NET_TCP_HDR_OPT_SACK_PERMIT 4u #define NET_TCP_HDR_OPT_SACK 5u #define NET_TCP_HDR_OPT_ECHO_REQ 6u #define NET_TCP_HDR_OPT_ECHO_REPLY 7u #define NET_TCP_HDR_OPT_TS 8u #define NET_TCP_HDR_OPT_PAD NET_TCP_HDR_OPT_END_LIST #define NET_TCP_HDR_OPT_LEN_END_LIST 1u #define NET_TCP_HDR_OPT_LEN_NOP 1u #define NET_TCP_HDR_OPT_LEN_MAX_SEG_SIZE 4u #define NET_TCP_HDR_OPT_LEN_WIN_SCALE 3u #define NET_TCP_HDR_OPT_LEN_SACK_PERMIT 2u #define NET_TCP_HDR_OPT_LEN_ECHO_REQ 6u #define NET_TCP_HDR_OPT_LEN_ECHO_REPLY 6u #define NET_TCP_HDR_OPT_LEN_TS 10u #define NET_TCP_HDR_OPT_LEN_SACK_MIN 6u #define NET_TCP_HDR_OPT_LEN_SACK_MAX 38u #define NET_TCP_HDR_OPT_LEN_MIN 1u #define NET_TCP_HDR_OPT_LEN_MIN_LEN 2u #define NET_TCP_HDR_OPT_LEN_MAX 38u typedef CPU_INT32U NET_TCP_OPT_SIZE; /* TCP opt size data type (see Note #4). */ #define NET_TCP_HDR_OPT_SIZE_WORD (sizeof(NET_TCP_OPT_SIZE)) #define NET_TCP_HDR_OPT_SIZE_MAX (NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_OPT_NBR_MIN 0u #define NET_TCP_HDR_OPT_NBR_MAX (NET_TCP_HDR_OPT_SIZE_MAX / NET_TCP_HDR_OPT_SIZE_WORD) #define NET_TCP_HDR_OPT_IX NET_TCP_HDR_SIZE_MIN /*$PAGE*/ /* ********************************************************************************************************* * TCP OPTION CONFIGURATION TYPE DEFINES * * Note(s) : (1) NET_TCP_OPT_CFG_TYPE_&&& #define values specifically chosen as ASCII representations of * the TCP option configuration types. Memory displays of TCP option configuration buffers * will display the TCP option configuration TYPEs with their chosen ASCII names. ********************************************************************************************************* */ /* ---------------- TCP OPT CFG TYPES ----------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_OPT_CFG_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x2053534Du /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x204E4957u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x504B4353u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x4B434153u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x51455245u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4F484345u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x20205354u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x534D2053u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x4957204Eu /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x4353504Bu /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x41534B43u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x52455145u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x43454F48u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x53542020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #endif #endif /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION TIMEOUT DEFINES * * Note(s) : (1) (a) (1) RFC #1122, Section 4.2.2.13 'DISCUSSION' states that "the graceful close algorithm * of TCP requires that the connection state remain defined on (at least) one end of * the connection, for a timeout period of 2xMSL ... During this period, the (remote * socket, local socket) pair that defines the connection is busy and cannot be reused". * * (2) The following sections reiterate that the TIME-WAIT state timeout scalar is two * maximum segment lifetimes (2 MSL) : * * (A) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check Sequence Number : TIME-WAIT STATE' * (B) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check FIN Bit : TIME-WAIT STATE' * * (b) (1) RFC #793, Section 3.3 'Sequence Numbers : Knowing When to Keep Quiet' states that * "the Maximum Segment Lifetime (MSL) is ... to be 2 minutes. This is an engineering * choice, and may be changed if experience indicates it is desirable to do so". * * (2) Microsoft Corporation's Windows XP defaults MSL to 15 seconds. ********************************************************************************************************* */ /* Max seg timeout (see Note #1b) : */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC ( 0u ) /* ... min = 0 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC ( 2u * DEF_TIME_NBR_SEC_PER_MIN) /* ... max = 2 minutes */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_DFLT_SEC ( 15u ) /* ... dflt = 15 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_SCALAR 2u /* ... scalar (see Note #1a). */ #define NET_TCP_CONN_TIMEOUT_CONN_DFLT_SEC (120u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt conn timeout = 120 minutes */ #define NET_TCP_CONN_TIMEOUT_USER_DFLT_SEC ( 30u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt user timeout = 30 minutes */ /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION STATES * * Note(s) : (1) See the following RFC's for TCP state machine summary : * * (a) RFC # 793; Sections 3.2, 3.4, 3.5, 3.9 * (b) RFC #1122; Sections 4.2.2.8, 4.2.2.10, 4.2.2.11, 4.2.2.13, 4.2.2.18, 4.2.2.20 * * (2) (a) #### Additional closing-data-available state used for closing connections to allow the * application layer to receive any remaining data. * * See also 'net_tcp.c NetTCP_RxPktConnHandlerFinWait1() Note #2f5A2', * 'net_tcp.c NetTCP_RxPktConnHandlerFinWait2() Note #2f5B', * 'net_tcp.c NetTCP_RxPktConnHandlerClosing() Note #2d2B2a1B', * & 'net_tcp.c NetTCP_RxPktConnHandlerLastAck() Note #2d2A1b'. ********************************************************************************************************* */ #define NET_TCP_CONN_STATE_NONE 0u #define NET_TCP_CONN_STATE_FREE 1u #define NET_TCP_CONN_STATE_CLOSED 10u #define NET_TCP_CONN_STATE_LISTEN 20u #define NET_TCP_CONN_STATE_SYNC_RXD 30u #define NET_TCP_CONN_STATE_SYNC_RXD_PASSIVE 31u #define NET_TCP_CONN_STATE_SYNC_RXD_ACTIVE 32u #define NET_TCP_CONN_STATE_SYNC_TXD 35u #define NET_TCP_CONN_STATE_CONN 40u #define NET_TCP_CONN_STATE_FIN_WAIT_1 50u #define NET_TCP_CONN_STATE_FIN_WAIT_2 51u #define NET_TCP_CONN_STATE_CLOSING 52u #define NET_TCP_CONN_STATE_TIME_WAIT 53u #define NET_TCP_CONN_STATE_CLOSE_WAIT 55u #define NET_TCP_CONN_STATE_LAST_ACK 56u #define NET_TCP_CONN_STATE_CLOSING_DATA_AVAIL 59u /* See Note #2a. */ /* ********************************************************************************************************* * TCP CONNECTION QUEUE STATES ********************************************************************************************************* */ #define NET_TCP_RX_Q_STATE_NONE 0u #define NET_TCP_RX_Q_STATE_CLOSED 100u #define NET_TCP_RX_Q_STATE_CLOSING 101u #define NET_TCP_RX_Q_STATE_SYNC 110u #define NET_TCP_RX_Q_STATE_CONN 111u #define NET_TCP_TX_Q_STATE_NONE 0u #define NET_TCP_TX_Q_STATE_CLOSED 200u #define NET_TCP_TX_Q_STATE_CLOSING 201u #define NET_TCP_TX_Q_STATE_SYNC 210u #define NET_TCP_TX_Q_STATE_CONN 211u #define NET_TCP_TX_Q_STATE_SUSPEND 215u #define NET_TCP_TX_Q_STATE_CLOSED_SUSPEND 220u #define NET_TCP_TX_Q_STATE_CLOSING_SUSPEND 221u /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION CODE DEFINES **************
上传时间： 2015-11-22
上传用户：the same kong
NCS8803 3.2.1 功能：是一颗将HDMI信号转EDP信号的转接芯片。其应用如下： 3.2.2产品特征 输入：HDMI 输出：Embedded-DisplayPort (eDP) EDP接口 1/2/4-lane eDP @ 1.62/2.7Gbps per lane HD to WQXGA (2560*1600) supported 内置EDP协议 HDMI Input HDMI 1.4a supported 支持RGB444/YCbCr444/YCbCr422 像素时钟： 340MHz 支持双通道音频输入； 参考时钟 任何频率，在19MHz到100MHz之间，单端时钟输入 内置5000 ppm SSC与否 通信方式 IIC 电源 1.2V core supply 2.5V or 3.3V IO supply 功耗：150Mw 封装：QFN-56 (7mm x 7mm) 3.2.4 应用产品：广告机，平板、医疗器械、车机、显示器、小电视、车载电视等 3.2.5 应用平台：RK、全志、M-star、炬力等 3.3.6 推广注意事项A:确认客户使用屏的分辨率，最常用的是1366x768@60Hz和1920x1080@60Hz BNCS8803支持4-lane DP / eDP输出通常支持WQXGA所需 (2560 * 1600)及以上60 hz的帧速率 C.确认客户的信号源，要是标准的HDMI信号,其他的都不行； D.此芯片支持缩放功能，分数缩放比例2:1至1:2； E、此芯片不是纯硬件转换芯片，需要通过IIC或者SPI进行初始化，初始化一般使用客户CPU进行，这样方便控制时序也节省成本，如果不使用客户CPU进行初始化就要另外加MCU进行配置。 设计注意事项： A、NCS8801S设计的时候要特别注意输入输出的走线问题，要做好屏蔽以免信号受到干扰。 B、注意电源滤波 C、设计的时候预留LVDS信号要预留阻抗匹配电阻 D、设计的时候复位脚最好由客户CPU的GPIO口进行控制，以便控制整个方案的时序，避免后面出现问题。
上传时间： 2022-07-08
上传用户：ibeikeleilei
VIP专区-嵌入式/单片机编程源码精选合集系列（2）资源包含以下内容：1. 用C进行嵌入式开发的一个完整的面向中级用户的讨论.2. 一个免费的嵌入式操作系统。.3. MSP430f149上LCD显示的程序.4. msp430 falsh自编程.5. MSP430浮点库.6. tcpip堆栈.7. 图像编码.8. 熟悉非常简单CPU模拟器 1、将所给模拟器的源程序编译成执行程序。 2、运行并观察非常简单CPU模拟器.9. 单个汉字库字摸提取程序.10. 软件红外线接收程序.11. I2C总线读写程序.12. 24C02读写程序.13. lcd 测试程序.14. ac97 测试.15. usb 检验程序.16. 8位RISC CPU的VERILOG编程 SOURCECODE.17. Verilog DHL教程.18. sdram的verilog的源码实现.19. 嵌入式系统.20. PALM PDB文件阅读器源代码.21. IRDA 1.0 标准协议源代码.22. cygnal 源代码.23. AD7708数据采集软件.24. uc/gui的使用说明文档.25. 嵌入式操作系统文档.26. UCL compress and decompress tool, very useful for embedded system.27. AD芯片TLC2543的转换例程。.28. 44b0x开发板使用教程源码.29. 用c++编写嵌入式多任务操作系统.30. 嵌入式系统开发圣经.31. MISRA C Compliance Matrix.32. C for Embedded Systems.33. 这是关于LCD常识的资料.34. 这是一篇关于RS－485接口应用的文章.35. 嵌入式系统讲义幻灯片课件.36. 这是一个在WindowsCE 环境下访问Sql 数据库的源代码.37. 这是一个在WindowsCE 环境下进行图形绘制的源程序。.38. 单片RS232-PPP/TCP/IP协议转换模块.39. Nucleus 使用说明.40. 该工程是从ecos嵌入式系统下移植过来的一个小型的fat16文件系统.
上传时间： 2013-04-15
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（5）资源包含以下内容：1. 嵌入式数据库系统.2. 一个演示实时多任务系统运行的仿真程序源码.3. 伟福仿真器软件使用.4. 一个完美的门禁考勤系统数据存储方案.5. 华邦CPU编程器仿真器设计.6. 给大家发一个４４b0x开发板的源代码.7. 一个s3c44b0上的启动兼测试程序.8. s3c44b0的一个bios源程序.9. DVB I2C读写驱动程序.10. 一种QPSK调制解调算法的误码率仿真.11. 嵌入式可编程器件CPLD的典型实例 压缩包.12. 外部中断INT0模拟1200bps串口通讯。一次MCU可以可以接收并通过MCU向下位机发送30个字节。.13. 老外个人做的MP3/优盘。使用ATMEL MEGA系列的MCU.14. 关于PS/2和USB键盘、鼠标的各种扫描码的资料。.15. TMS320F240 DSK板原理图.16. 本文从理论上推导出CRC 算法实现原理.17. 一个TCPIP应用于MSP430的源程序.18. 8位LED显示芯片7219的C原程序.19. 嵌人式系统编程学习.20. sonix 常用mcu的硬件资料.21. D1302充电程序.22. 对24C02的读、写.23. 嵌入式浏览器Dillo源码.24. 手写识别Chinput源码.25. 嵌入式设计应用范例系列一。.26. 基于PPC的BootLoader.27. 数模转换程序.28. 串行打印机程序！.29. 下载用上位机程序.30. LCD点阵12864 C语言.31. 用c写的液晶驱动.32. EMBEDDED SOFTWARE DEVELOPMENT WITH ECOS.33. Nucleus PLUS源码分析.34. 44bx中文手册.35. bsp基本概念.36. FAT32文件系统详细介绍.37. Flash文件系统实现论文.38. i.MX开发板原理图.39. Linux MTD源代码分析.40. ULIP及vxsim网络仿真的实现.
上传时间： 2013-07-19
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（7）资源包含以下内容：1. 嵌入式WEB程序.2. goahead webserver源码.3. 开发嵌入式实时系统很好的参考.4. Port串行通信.5. pstn实用拨号规则.6. 9600bps的模拟串口程序.7. 代语音的报警器.8. 工业用控制器源程序..9. RTOS 51代码.10. 一款低价位时钟芯片的C驱动程序.11. 各种Eeprom的C驱动程序（可配置）.12. 《Programming Embedded Systems in C and C++》嵌入式C/C++编程.13. 《The Art of Designing Embedded Systems(设计嵌入式系统的艺术)》,不可多得的好书.14. 最新ATX电源图.15. 实时多任务操作系统源代码M430/OS V1.20.16. mcs51汇编子程序.17. mcs51测试子程序.18. mcs51子程序集.19. mcs51子程序.20. 工控modbus协议通讯.21. PLC中查表功能函数.22. PLC中参数保存到EEpRom中源码.23. 6502 Assembly Code Examples.24. VC分割窗口源程序.25. 引脚说明.26. LPC922 I2c接口从机代码.27. LPC922 I2c接口硬件主方式代码.28. LPC922 PWM测试程序.29. 自己写的51接收遥控器解码.30. OMB COMMON CLASSES 源代码.31. Linux下通过jtag烧写flash的源代码.32. PIC16CXX C语言工具.33. MODEM AT 指令集.34. rtx-tiny源码.35. 很有用的bootloader源码.36. AVR的IIC接口程序.37. PCF8583和MCS51的接口（IIC）的程序.38. 基于AT91RM9200中断例程.39. 一种标准的PC AT键盘来提供大多数微控制器所需的某些人机接口方法.40. 如何实现作为多用途I2C外设器件的AT90S12.
上传时间： 2013-06-30
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（33）资源包含以下内容：1. Embedded Web Server Architecture for Web-based Element and Network Management关于嵌入式Web服务器的完整论文.2. 这是一个电子时钟程序,里面有显示时间子程序,还有调整,键盘等子程序!.3. 这是一个可调的PWM波程序,稍作修改就可以控制电机转速或其他设备!.4. 这是实验室在进行嵌入式开发的时候的首选.5. LCD 仿真器 一、概述 LCD仿真器是一种电子产品的辅助开发工具。目前LCD（液晶屏）在各种电子产品的使用越来越广泛.6. 提供了与《嵌入式实时操作系统及应用开发》教材配套的实验系统软件.7. 摩托罗拉公司发布的QL4的Lin总线kit,freescale网站上花钱买的.8. RTLinux的介绍.9. 嵌入式系统教学教案.10. 在UNIX 系统下得到字符点阵信息嵌入式系统设计中消除内存丢失的策略matlab循环变量小技巧hard disk 1.8# device driverC程序中如何转换GB2312.11. 针对周立功2104板子的一个秒表程序,可以通过按键分别查看秒表的时间,分,秒..12. 难得一见的"EDA技术与PLD设计"课程的课件.13. C语言函数库文件.14. 本程序用汇编语言编写.15. 嵌入式系统设计中消除内存丢失的策略.16. 这是有关DM642开发板的相关幻灯片.17. 周立功2106板子的启动程序代码,包括初始化,中断向量表,和头文件..18. 嵌入式资料光盘,刚刚下的,还没有来得及看,如果感兴趣可以先看看,含有资料文档..19. 320X240LCD仿真程序 320x240lcd仿真程序.20. 嵌入式我们老师的课件.优点用处..呵呵....呵呵后.21. MiniGui API函数大全及详细介绍。.22. S3C2410开发板与PC机的通信 客户端和 服务器端的代码 以及makefile文件 服务器为开发板 执行 S3 PC机为客户机 执行host.c.23. GIMP Dynamic Text是GIMP的插件程序.24. keil c公司网站下载的一些实例教程程序!.25. 移植到ＧＢＡ上运行的ＬＩＮＵＸ的代码.26. 用protel 99 设计的可编程彩灯控制器 可显示16个画面 8*8矩阵.27. ucos for vc ucos compiled and run in vc.28. 嵌入式的综合内容.29. 基于ARMs3c44b0的键盘输入输出i/o的在 led上显示出来的程序.30. PC-Lint是一个历史悠久.31. PC-Lint是一种静态代码检测工具.32. C++ 的难学.33. TCP/IP Lean: Web Servers for Embedded Systems, Second Edition.34. 一个多功能的遥控编码程序,其中有较为详细的键盘扫描程序和用于推动红外发射的发码程序.35. eCos/RedBoot for勤研ARM AnywhereII(4510) 含全部源代码.36. Windows CE是微软为嵌入式设备打造的操作系统.37. 现在开发的硬件良好产品 结合C和ASM一起开发 可以混合用C里的函数库.38. Altera recommends the following system configuration: * Pentium II 400 with 512-MB system memory (fa.39. Cyclone1C20的Nios开发板完整原理图Protel格式.40. Interface Fiche Technique : Langage de programmation : Visual Basic 5.0 Support : Une version de Win.
上传时间： 2013-04-15
上传用户：eeworm
