为解决当前计算机串行通讯接口只有USB,难以满足旧型号设备或某些单片机要求RS232通讯的问题,设计出两款RS232/USB电路。采用CH341A与MAX223集成电路芯片构建标准9线RS232/USB通用接口转换器,无需编程。采用CH341A与PIC16F877A构建单片机与计算机之间的USB通讯电路,软件遵循RS232通讯协议,硬件进行电平转换。实际使用表明,这两款产品与计算机端Windows 操作系统下的串口应用程序完全兼容,且通讯过程中无握手失败现象。 Abstract: To solve the problem that current computer serial communication only with USB interface can not satisfy with the old type equipments or MCU to communicate with RS232, two kinds of RS232/USB circuit were designed.CH341A and MAX223 INTEGRATED circuit chips were used to create a standard 9-line RS232/USB universal interface convertor without programme. CH341A and PIC16F877A chips were adopted to build the USB communication circuit between computers and MCU. The software follows RS232 communication protocol, and the hardware converts electrical levels. Actual practices indicate that the two manufactures are compatible with serial application program of Windows operation system completely,and get avoid of handshake lost.
上传时间: 2013-11-03
上传用户:siying
,我说说AVR 的集成开发环境。也就是常说的IDE(INTEGRATED Development Environment)。图片比较多,虽然用软件处理过体积,网页可能还是比较慢,还请见谅。 现今世界上的AVR 开发环境可以说是百花齐放了,互相当然各有长短,我们看看都有哪些: 首当其冲的应该还是IAR,为什么呢,因为当初AVR 还在ATMEL 胎中酝酿的时候,IAR 公司 参与了AVR 的设计,因此可以认为IAR 有更为正统的血液,它最了解AVR,它的编译器编出来的 代码应该最优秀。好比你生的孩子还是你最了解——至少相当长一段时间是这样的。事实上,IAR for AVR 确实展现了这个实力,它的功能确实最为强大,无论是源代码编写还是软件乃至硬件仿 真,编译出来的代码也十分优秀。但是事物总是相对存在的,优点有时就意味着缺点。IAR 功能 全面而强悍,代价就是它的软件界面比较复杂,设置选项多,网上的资料也比较少,最要命的是 这个软件非常的贵,好吧你说你有破解版,但是破解文件一般并不通用,而且破解方法一般都稍 显繁琐。以上几条,对于新接触AVR 的人来说,几乎是迈不过的坎。
标签: AVR
上传时间: 2013-10-15
上传用户:weiwolkt
介绍一种基于C8051单片机的动态心电监护系统。该系统由两部分组成:以C8051F320单片机为核心的数据采集装置和以PC机为平台的分析处理系统。硬件电路功耗低,由单片机自带的USB接口将数据传送给PC机。软件平台采用LabVIEW可视化虚拟仪器系统开发平台,将传统仪器的功能模块集成到计算机中,用户可通过修改虚拟仪器的程序改变其功能。采用USB接口实时传输心电数据,并将数据采集模块设计为计算机外设,使该系统高速快捷、小巧便携。 Abstract: In this design,a low-cost ECG electrocardiogram monitoring system is introduced,which consists of two parts:data acquisition device based on C8051F320and PC terminal as the analysis and processing system.The system is low-power consumption,the data is transmitted to the PC terminal by USB interface of the C8051F320.By using the visible virtual instrument system developing platform LabVIEW,the traditional instruments function modules are INTEGRATED into the computer,so the user can modify virtual instrument software to change its function to meet their needs.Using USB in-terface to realize real-time ECG data transmission,in addition,ECG data acquisition module is designed as the computer peripheral,which makes the syetem high-speed and portable.
上传时间: 2013-11-13
上传用户:zhangzhenyu
介绍了一种基于C8051F020单片机的多路压力测量仪。该测量仪选用电阻应变式压力传感器采集压力信号,并经放大电路处理后送入C8051F020单片机,再由C8051F020单片机内部的A/D转换器将采集到的压力信号进行模数转化,然后分别对数据进行存储和显示。该测量仪能测量6路压力信号,并且各测量点都能单独检测和设置。由于采用了C8051F020单片机,简化了硬件电路,增强了抗干扰能力,使得测量仪具有测量精度高,冲击小等特点。 Abstract: A measurement apparatus for multi-channel pressure based on single chip microcomputer is introduced.It can measure 6 channels signal of the pressure,and the pressure measure points can be detection and located individually.The pressure signal sampling is obtained by resistor stress-type pressure sensors,the digital signals of 6 channels are collected through amplifying and adjustment circuit of pressure signals and internal INTEGRATED A/D converter of MCU.Finally,and it realizes the function to store and display data separately.C8051F020 was used to made hardware circuit simple,and it also enhanced the anti-interference ability.It features high precision and little impact.
上传时间: 2013-11-16
上传用户:yare
阐述了一个由上位PC机和AT89C52下位单片机组成的主从分布式温度巡回检测系统。主从机采用RS-485 串行通讯标准进行通信,可在下位单片机实现基本的温度数据巡回检测基础上,由上位PC机实现综合处理功能或扩展为远程操作。整个系统具有巡检速度快,扩展性好的特点。 Abstract: In this paper,a top PC and AT89C52 under-bit microcontrollers from the main component of the tour distributed temperature detection system is presented. Master and slave can use RS-485 serial communication standards for communications.Based on next-bit machine for basic goods temperature detected data Tour, the top can achieve the INTEGRATED treatment of PC functions or for the expansion of long-distance operation. The entire inspection system is fast, expansion.
上传时间: 2013-10-13
上传用户:zhoujunzhen
气压是气象监测中的一个重要参数,提出了一种气压数据采集模块设计方案,该模块采用数字气压传感器MS5534B、MSP430单片机MSP430F2272和带实时时钟(RTC)64 KB铁电存储器。通过低功耗软件设计方法以微安级整体平均功耗实现了气压数据的采集和存储,适合电池供电的连续高精度气压采集应用。给出了模块的软硬件设计以及MS5534B的性能指标和使用经验。 Abstract: Air pressure is an important parameter in weather monitor.This paper futs forward a new design scheme of low power-air pressure data acquisition module.The module uses a digital output barometer sensor MS5534B,MSP430 microcontroller MSP430F2272 and INTEGRATED RTC 64KB FRAM,precision air pressure measurement and storage chip.Another point of this module is low power consumption, so it is well suited for battery powered air pressure data acquisition applications. At the same time,the software and hardware deign of module is presented,And the speciaties and use notices of MS5534B are given.
上传时间: 2014-12-27
上传用户:drink!
The SN65LBC170 and SN75LBC170 aremonolithic INTEGRATED circuits designed forbidirectional data communication on multipointbus-transmission lines. Potential applicationsinclude serial or parallel data transmission, cabledperipheral buses with twin axial, ribbon, ortwisted-pair cabling. These devices are suitablefor FAST-20 SCSI and can transmit or receivedata pulses as short as 25 ns, with skew lessthan 3 ns.These devices combine three 3-state differentialline drivers and three differential input linereceivers, all of which operate from a single 5-Vpower supply.The driver differential outputs and the receiverdifferential inputs are connected internally to formthree differential input/output (I/O) bus ports thatare designed to offer minimum loading to the buswhenever the driver is disabled or VCC = 0. Theseports feature a wide common-mode voltage rangemaking the device suitable for party-lineapplications over long cable runs.
上传时间: 2013-10-13
上传用户:ytulpx
FEATURES400 MSPS internal clock speedINTEGRATED 10-bit DAC32-bit tuning wordPhase noise ≤ –120 dBc/Hz @ 1 kHz offset (DAC output)Excellent dynamic performance>75 dB SFDR @ 160 MHz (±100 kHz offset) AOUTSerial I/O control1.8 V power supplySoftware and hardware controlled power-down48-lead TQFP/EP packageSupport for 5 V input levels on most digital inputsPLL REFCLK multiplier (4× to 20×)Internal oscillator; can be driven by a single crystalPhase modulation capabilityMultichip synchronization
上传时间: 2014-12-04
上传用户:axin881314
The MSP-FET430PIF is a Parallel Port interface (does not include target board) that is used to program and debug MSP430 FET tools and test boards through the JTAG interface. This interface is included in our FET tools, but sold without the development board. This interface uses a Parallel PC Port to communicate to the Debugger Software (IAR Kickstart software included) running on the PC. The interface uses the standard 14 pin header to communicate to the MSP430 device using the standard JTAG protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is extremely low power, no external power supply is required. The tool has an INTEGRATED software environment and connects directly to the PC which greatly simplifies the set-up and use of the tool. The flash development tool supports development with all MSP430 flash parts. Features MSP430 debugging interface to connect a MSP430-Flash-device to a Parallel port on a PC Supports JTAG debug protocol (NO support for Spy-Bi-Wire (2-wire JTAG) debug protocol, Spy-Bi-Wire (2-wire JTAG) is supported by MSP-FET430UIF) Parallel Port cable and a 14-conductor target cable Full documentation on CD ROM INTEGRATED IAR Kickstart user interface which includes: Assembler Linker Limulator Source-level debugger Limited C-compiler Technical specifications: Backwardly compatable with existing FET tool boards.
上传时间: 2013-10-26
上传用户:fengweihao158@163.com
The MSP-FET430U14 is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required. The debugging tool interfaces the MSP430 to the included INTEGRATED software environment and includes code to start your design immediately. The MSP-FET430UIF development tools supports development with all MSP430 flash devices
上传时间: 2013-10-28
上传用户:13691535575