虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

INForMATION-Technology

  • 51编程指南--MCSÉ-51 Program

    MCSÉ-51 Programmer's Guide and Instruction Set The information presented in this chapter is collected from the MCSÉ-51 Architectural Overview and the HardwareDescription of the 8051, 8052 and 80C51 chapters of this book. The material has been selected and rearranged toform a quick and convenient reference for the programmers of the MCS-51. This guide pertains specifically to the8051, 8052 and 80C51.

    标签: Program Eacute MCS 51

    上传时间: 2013-11-13

    上传用户:hj_18

  • 锂-离子线性电池充电控制器LTC1732及其应用

    LTC1732 是LINEAR TECHNOLOGY 公司推出的锂离子电池充电控制集成电路芯片。它具有电池插入检测和自动低压电池充电功能。文章介绍了该芯片的结构、特点、工作原理及应用信息,给出了典型的应用电路。 LTC1732 是LINEAR TECHNOLOGY 公司生产的锂-离子(Li-离子)电池恒流/恒压线性充电控制器。它也可以对镍-镉(NiCd)和镍-氢(NiMH)电池恒流充电。其充电电流可通过外部传感电阻器编程到7%(最大值)的精度。最终的浮动电压精度为1%。利用LTC1732 的SEL 端可为4.1V 或4.2V 电池充电。当输入电源撤消后,LTC1732 可自动进入低电流睡眠状态,以使消耗电流下降到7μA。LTC1732 的内部比较器用于检测充电结束条件(C/10),而总的充电时间则是通过可编程计时器的外部电容来设置的。在电池完全放电后,控制器将自动以规定电流的10%对被充电电池进行慢速充电直到电池电压超过2.457V。当放电后的电池插入充电器或当输入电源接通时,LTC1732 将开始重新充电。另外,如果电池一直插入在充电器且在电池电压降到3.8V(LTC1732-4)或4.05V(LTC1732-4.2)以下时,充电器也将开始重新充电。LTC1732 的其它主特点如下:●具有1%的预置充电电压精度;●输入电压范围4.5V~12V;●充电电流可编程控制;●具有C/10 充电电流检测输出;●可编程控制充电终端计时;●带有低电压电池自动小电流充电模式;●可编程控制恒定电流接通模式;●具有电池插入检测和自动低压电流充电功能;●带有输入电源(隔离适配器)检测输出;●LTC1732-4.2 型器件的再充电阈值电压为4.05V;●LTC1732-4 型器件的再充电阈值电压为3.8V。

    标签: 1732 LTC 离子 电池充电

    上传时间: 2013-11-12

    上传用户:semi1981

  • 子空间模式识别方法

    提出了一种改进的LSM-ALSM子空间模式识别方法,将LSM的旋转策略引入ALSM,使子空间之间互不关联的情况得到改善,提高了ALSM对相似样本的区分能力。讨论中以性能函数代替经验函数来确定拒识规则的参数,实现了识别率、误识率与拒识率之间的最佳平衡;通过对有限字符集的实验结果表明,LSM-ALSM算法有效地改善了分类器的识别率和可靠性。关 键 词 学习子空间; 性能函数; 散布矩阵; 最小描述长度在子空间模式识别方法中,一个线性子空间代表一个模式类别,该子空间由反映类别本质的一组特征矢量张成,分类器根据输入样本在各子空间上的投影长度将其归为相应的类别。典型的子空间算法有以下三种[1, 2]:CLAFIC(Class-feature Information Compression)算法以相关矩阵的部分特征向量来构造子空间,实现了特征信息的压缩,但对样本的利用为一次性,不能根据分类结果进行调整和学习,对样本信息的利用不充分;学习子空间方法(Leaning Subspace Method, LSM)通过旋转子空间来拉大样本所属类别与最近邻类别的距离,以此提高分类能力,但对样本的训练顺序敏感,同一样本训练的顺序不同对子空间构造的影响就不同;平均学习子空间算法(Averaged Learning Subspace Method, ALSM)是在迭代训练过程中,用错误分类的样本去调整散布矩阵,训练结果与样本输入顺序无关,所有样本平均参与训练,其不足之处是各模式的子空间之间相互独立。针对以上问题,本文提出一种改进的子空间模式识别方法。子空间模式识别的基本原理1.1 子空间的分类规则子空间模式识别方法的每一类别由一个子空间表示,子空间分类器的基本分类规则是按矢量在各子空间上的投影长度大小,将样本归类到最大长度所对应的类别,在类x()iω的子空间上投影长度的平方为()211,2,,()argmax()jMTkkjpg===Σx􀀢 (1)式中 函数称为分类函数;为子空间基矢量。两类的分类情况如图1所示。

    标签: 子空间 模式 识别方法

    上传时间: 2013-12-25

    上传用户:熊少锋

  • 带通滤波器设计计算

    摘 要:用一种新的思路和方法,先计算低通、再计算高通滤波器的有关参数,然后组合成带通滤波器.关键词:滤波器;参数;新思路中图分类号: TN713. 5  文献识别码:B  文章编号:1008 - 1666 (1999) 04 - 0089 - 03A New Consideration of the Band Filter’s CalculationGuo Wencheng( S hao Yang B usiness and Technology school , S haoyang , Hunan ,422000 )Abstract :This essay deals with a new method of calculating the band filters - first calculatingthe relevant parameters of low - pass filters ,then calculating the ones of high - pass filters.Key words :filter ; parameters ;new considercation八十年代后,信息产业得到了迅猛发展. 带通滤波器在微波通信、广播电视和精密仪器设备中得到了广泛应用. 带通滤波器性能的优劣,对提高接收机信噪比,防止邻近信道干扰,提高设备的技术指标,有着十分重要的意义.我在长期的教学实践中,用切比雪夫型方法设计、计算出宽带滤波器集中参数元件的数据. 该滤波器可运用在检测微波频率的仪器和其他设备中. 再将其思路和计算方法介绍给大家,供参考.

    标签: 带通滤波器设计 计算

    上传时间: 2014-12-28

    上传用户:Yukiseop

  • at89c52 pdf

    The AT89C52 is a low-power, high-performance CMOS 8-bit microcomputer with 8Kbytes of Flash programmable and erasable read only memory (PEROM). The deviceis manufactured using Atmel’s high-density nonvolatile memory technology and iscompatible with the industry-standard 80C51 and 80C52 instruction set and pinout.The on-chip Flash allows the program memory to be reprogrammed in-system or by aconventional nonvolatile memory programmer. By combining a versatile 8-bit CPUwith Flash on a monolithic chip, the Atmel AT89C52 is a powerful microcomputerwhich provides a highly-flexible and cost-effective solution to many embedded controlapplications.

    标签: 89c c52 at

    上传时间: 2013-11-10

    上传用户:1427796291

  • The Hardware Book (WinHelp32)

    The Hardware Book (WinHelp32) Information from The Hardware Book

    标签: Hardware WinHelp Book The

    上传时间: 2013-11-23

    上传用户:cepsypeng

  • TMS320C54x DSP 的cpu和外围设备

    Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their productsor to discontinue any product or service without notice, and advise customers to obtain the latestversion of relevant information to verify, before placing orders, that information being relied onis current and complete. All products are sold subject to the terms and conditions of sale suppliedat the time of order acknowledgement, including those pertaining to warranty, patentinfringement, and limitation of liability

    标签: 320C TMS 320 C54

    上传时间: 2013-12-26

    上传用户:凌云御清风

  • 《器件封装用户向导》赛灵思产品封装资料

    Introduction to Xilinx Packaging Electronic packages are interconnectable housings for semiconductor devices. The major functions of the electronic packages are to provide electrical interconnections between the IC and the board and to efficiently remove heat generated by the device. Feature sizes are constantly shrinking, resulting in increased number of transistors being packed into the device. Today's submicron technology is also enabling large-scale functional integration and system-on-a-chip solutions. In order to keep pace with these new advancements in silicon technologies, semiconductor packages have also evolved to provide improved device functionality and performance. Feature size at the device level is driving package feature sizes down to the design rules of the early transistors. To meet these demands, electronic packages must be flexible to address high pin counts, reduced pitch and form factor requirements. At the same time,packages must be reliable and cost effective.

    标签: 封装 器件 用户 赛灵思

    上传时间: 2013-10-22

    上传用户:ztj182002

  • Employing a Single-Chip Transceiver in Femtocell Base-Station Applications

    Abstract: This application note discusses the development and deployment of 3G cellular femtocell base stations. The technicalchallenges for last-mile residential connectivity and adding system capacity in dense urban environments are discussed, with 3Gfemtocell base stations as a cost-effective solution. Maxim's 3GPP TS25.104-compliant transceiver solution is presented along withcomplete radio reference designs such as RD2550. For more information on the RD2550, see reference design 5364, "FemtocellRadio Reference Designs Using the MAX2550–MAX2553 Transceivers."

    标签: Base-Station Applications Single-Chip Transceiver

    上传时间: 2013-11-07

    上传用户:songrui

  • XAPP503-针对Xilinx器件的SVF和XSVF文件格式

    This application note provides users with a general understanding of the SVF and XSVF fileformats as they apply to Xilinx devices. Some familiarity with IEEE STD 1149.1 (JTAG) isassumed. For information on using Serial Vector Format (SVF) and Xilinx Serial Vector Format(XSVF) files in embedded programming applications

    标签: Xilinx XAPP XSVF 503

    上传时间: 2013-10-21

    上传用户:tiantwo