数字控制的交流调速系统所选用的微处理器、功率器件及产生PWM波的方法是影响交流调速系统性能好坏的直接因素。在介绍了正弦脉宽调制(SPWM)技术的基础上，设计了一种以8098单片机作为控制器，以智能功率模块IPM为开关器件的变频调速系统。通过软件编程，产生正弦脉冲宽度调制波形来控制绝缘栅双极晶体管的导通和关断，从而达到控制异步电动机转速的目的。实验结果表明，该系统可调频率调电压，稳定度高，调速范围宽，具有较强的实用价值 Abstract: AC variable speed with digital control systems used microprocessors， power devices and generate PWM wave is the direct factors of affecting the performance AC speed regulation system. On the basis of introducing the sinusoidal pulse width modulation (SPWM) technology，this paper designed variable speed system which used 8098 as a controller， intelligent power module IPM as switching device. Through software programming， resulting in sinusoidal pulse width modulation waveform to control the insulated gate bipolar transistor turn on and off， so as to achieve the purpose of speed control of induction motors. Experimental results show that the system can adjust frequency modulation voltage， high stability， wide speed range， has a strong practical value.
上传时间： 2013-11-14
上传用户：ynwbosss
利用单片机具有的智能程序控制的特点，设计了基于STC89C52单片机的"二极管特性测试器"，可对二极管一般特性进行快速测试。通过稳定线性电流源给二极管加载恒定电流，然后由高精度模数转换器测试其压降，以此为基础可判断二极管好坏、检测二极管极性和测试二极管伏安特性等，避免了用万用表测试只能测得极性而不知其特性这一缺点。可用于电子设计制作过程中对二极管进行快速测试，以确定被测二极管是否满足电路的设计要求。 Abstract: By making good use of the intelligent control function of the Micro Controller Unit (MCU)， the diode trait tester was designed based on the STC89C52，which could be used to test the trait of a diode rapidly. By loading constant current to diode through the stable linear current source， and measuring the voltage drop of the diode by high-precision analogue-to-digital converter (ADC)， it can judge whether the diode is good or not， distinguish the polarity of the diode， and test the trait that the diode， which can avoid the fault of using a multimeter can only measure the polarity but not the trait. This device can be used to test the trait of a diode quickly，and to make sure that whether a diode can be used in the electronic design or not.
上传时间： 2013-11-13
上传用户：assef
常用PIC系列产品特性一览表 器件 存储器 类型 字数 EEPROM 数据 存储器 RAM I/O 引脚数 ADC （-Bit） 比较 器 运 放 定时器/WDT 串行接口 最高 速度 MHz 封装 PDIP /SOIC ICSP CCP / ECCP 输出电流 (per I/O) 振荡器 频率 (MHz) 参考 电压 VREF LCD PWM 堆栈 深度 High Voltage Wakeup On Change PIC16C432 OTP 2048x14 128 12 2 1-8bit/1-WDT 20 20 √ 25 mA 4 0 0 PIC16C433 OTP 2048x14 128 6 4/8 1-8bit/1-WDT 10 18 √ 25 mA 0 0 PIC16C505 OTP 1024x12 72 12 1-8bit/1-WDT 20 14 √ 25 mA 4 0 0 PIC16C54 OTP 512x12 25 12 1-8bit/1-WDT 20 18/20 20 mA 0 0 PIC16C54A OTP 512x12 25 12 1-8bit/1-WDT 20 18/20 20 mA 0 0 PIC16C54C OTP 512x12 25 12 1-8bit/1-WDT 40 18/20 20 mA 0 0 PIC16C55 OTP 512x12 24 20 1-8bit/1-WDT 20 28 20 mA 0 0 PIC16C554 OTP 512x14 80 13 1-8bit/1-WDT 20 18/20 √ 25 mA 0 0 PIC16C558 OTP 2048x14 128 13 1-8bit/1-WDT 20 18/20 √ 25 mA 0 0 PIC16C55A OTP 512x12 24 20 1-8bit/1-WDT 40 28 20 mA 0 0 PIC16C56 OTP 1024x12 25 12 1-8bit/1-WDT 20 18/20 20 mA 0 0 PIC16C56A OTP 1024x12 25 12 1-8bit/1-WDT 40 18/20 20 mA 0 0 PIC16C57 OTP 2048x12 72 20 1-8bit/1-WDT 20 28 20 mA 0 0 PIC16C57C OTP 2048x12 72 20 1-8bit/1-WDT 40 28 20 mA 0 0 PIC16C58B OTP 2048x12 73 12 1-8bit/1-WDT 40 18/20 20 mA 0 0 PIC16C620 OTP 512x14 80 13 2 1-8bit/1-WDT 20 18/20 √ 25 mA √ 0 0 PIC16C620A OTP 512x14 96 13 2 1-8bit/1-WDT 40 18/20 √ 25 mA √ 0 0 PIC16C621 OTP 1024x14 80 13 2 1-8bit/1-WDT 20 18/20 √ 25 mA √ 0 0 PIC16C621A OTP 1024x14 96 13 2 1-8bit/1-WDT 40 18/20 √ 25 mA √ 0 0 PIC16C622 OTP 2048x14 128 13 2 1-8bit/1-WDT 20 18/20 √ 25 mA √ 0 0 PIC16C622A OTP 2048x14 128 13 2 1-8bit/1-WDT 40 18/20/40 √ 25 mA √ 0 0 PIC16C62A OTP 2048x14 128 22 2-8bit/1-16bit/1-WDT I²C/ SPI 20 28/ √ 1 25 mA 1 0 0 PIC16C62B OTP 2048x14 128 22 2-8bit/1-16bit/1-WDT I²C /SPI 20 28 √ 1 25 mA 1 0 0 PIC16C63 OTP 4096x14 192 22 2-8bit/1-16bit/1-WDT USART/I²C /SPI 20 28 √ 2 25 mA 2 0 0 PIC16C63A OTP 4096x14 192 22 2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 28 √ 2 25 mA 2 0 0 PIC16C642 OTP 4096x14 176 22 2 1-8bit/1-WDT 20 28 √ 25 mA √ 0 0 PIC16C64A OTP 2048x14 128 33 2-8bit/1-16bit/1-WDT I²C /SPI 20 40/44 √ 1 25 mA 1 0 0 PIC16C65A OTP 4096x14 192 33 2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 40/44 √ 2 25 mA 2 0 0 PIC16C65B OTP 4096x14 192 33 2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 40/44 √ 2 25 mA 2 0 0 PIC16C66 OTP 8192x14 368 22 2-8bit/1-16bit/1-WDT USART/I²C/SPI 20 28 √ 2 25 mA 2 0 0 PIC16C662 OTP 4096x14 176 33 2 1-8bit/1-WDT 20 40/44 √ 25 mA √ 0 0 PIC16C67 OTP 8192x14 368 33 2-8bit/1-16bit/1-WDT USART/I²C /SPI 20 40/44 √ 2 25 mA 2 0 0 PIC16C71 OTP 1024x14 36 13 4/8 1-8bit/1-WDT 20 18 √ 25 mA 0 0 PIC16C710 OTP 512x14 36 13 4/8 1-8bit/1-WDT 20 18/20 √ 25 mA 0 0 PIC16C711 OTP 1024x14 68 13 4/8 1-8bit/1-WDT 20 18/20 √ 25 mA
上传时间： 2013-10-12
上传用户：xjy441694216
Digitemp Junior – An RS-232 Port-Powered Digital Thermometer Digitemp Jr. is a device that is designed to measure and report ambient temperature. When connected to an RS-232 port on any PC, it will periodically measure and report in ASCII form the ambient temperature in degrees Celsius. These temperature readings can be monitored with any terminal program. If the terminal program supports capture to disk, the temperature readings can be saved to disk for further analysis with a spreadsheet program or other data analysis tool. The simple ASCII output format of Digitemp Jr. makes it rel- atively easy to write custom software for receiving, recording, and analyzing ambient temperature data. Best of all, Digitemp Jr. requires no external power sup- plies or batteries. It is powered directly by the RS-232 port.
上传时间： 2013-10-21
上传用户：baitouyu
为了提高传统温度控制系统的性能，将PID控制理论与嵌入式系统相结合，采用瑞萨电子公司的H8S/2166作为核心处理器，AD公司的AD7705以及热敏电阻温度传感器作为温度检测单元，利用4×6小键盘、LCD显示器和S1D13305液晶控制器达到良好的人机交互，设计出了一个应用于化工领域的嵌入式实时温度控制系统。相比于传统温度控制系统，该系统提供了更强的计算能力和可扩展能力，采用增量PID控制算法实现复杂控制。通过实验，该系统能达到0.1 ℃的温度控制精度以及小于120 s的温度稳定时间。 Abstract: In order to improve the performance of conventional temperature control system， combining PID control theory with embedded systems， using the Renesas Electronics Corp. H8S/2166 micro-controller as a core processors， AD7705 and thermistor temperature sensor as a temperature detection unit and 4×6 small keyboard， LCD and S1D13305 LCD controller as a good human-computer interaction， this paper designed an embedded real-time temperature control system which is applied in chemical industry. Compared with conventional temperature control system， this system provides more computing power and extensibility， and adopts PID control algorithm for complex control. Through the experiment， the system can reach temperature control accuracy of 0.1 ℃ and temperature stabilization time of less than 120 seconds.
上传时间： 2014-12-26
上传用户：003030
为了使音频信号分析仪小巧可靠，成本低廉，设计了以2片MSP430F1611单片机为核心的系统。该系统将音频信号送入八阶巴特沃兹低通滤波器，对信号进行限幅放大、衰减、电平位移、缓冲，并利用一单片机负责对前级处理后的模拟信号进行采样，将采集得到的音频信号进行4 096点基2的FFT计算，并对信号加窗函数提高分辨率，另一单片机负责对信号的分析及控制显示设备。此设计精确的测量了音频信号的功率谱、周期性、失真度指标，达到较高的频率分辨率，并能将测量结果通过红外遥控器显示在液晶屏上。 Abstract: o make the audio signal analyzer cheaper， smaller and more reliable， this system sends the audio signal to the eight-order butterworth filter， and then amplifies， attenuates， buffers it in a limiting range， transfers the voltage level of the signal before utilizing two MSP430F1611 MCU to realize the audio analysis. One is charged for sampling and dealing with the processed audio signal collected by the 4096 point radix-2 FFT calculation and imposes the window function to improve the frequency resolution. The other one controls the display and realizes the spectrum， periodicity， power distortion analysis in high resolution which is displayed in the LCD screen through the infrared remote control.
上传时间： 2013-12-11
上传用户：jasonheung
现有基于MAX7219芯片的数码管驱动电路只适用于小尺寸LED，为扩展其使用范围，在介绍动态显示芯片MAX7219功能的基础上，提出了一个基于该芯片的8位高亮度8英寸数码管驱动电路。电路保留了MAX7219芯片的功能强大、编程简单等优点，通过74LS273锁存器和ULN2803达林顿驱动器，实现了对任意大尺寸数码管提供较高电压和电流驱动的静态显示，并亮度可调。 Abstract: The existing display-driving circuit based on MAX7219 was only applicable to small-size LED. To expand its use, based on the function introduction of dynamic display chip MAX7219, a display-driving circuit for high-brightness 8-bit LED with the size of 8-inch was proposed. The advantages of MAX7219 were retained, such as powerful function and simple programming. Static display with adjustable brightness for large-size LED with higher voltage and current was achieved with the help of 74LS273 and ULN2803.
上传时间： 2013-10-23
上传用户：31633073
目录： 1. Character Type Functions － 字符类型函数 2. Standard C Input/Output Functions － 标准输入输出函数 3. Standard Library Functions － 标准库和内存分配函数 4. Mathematical Functions － 数学函数 5. String Functions － 字符串函数 6. BCD Conversion Functions － BCD 转换函数 7. Memory Access Functions － 存储器访问函数 8. Delay Functions － 延时函数 9. LCD Functions － LCD函数 10. LCD Functions for displays with 4x40 characters － 4×40 字符型LCD函数 11. LCD Functions for displays connected in 8 bit memory mapped mode －以8 位外部存储 器模式接口的LCD显示函数 12. I2C Bus Functions － I2C 总线函数 13. National Semiconductor LM75 Temperature Sensor Functions － LM75 温度传感器函数 14. Dallas Semiconductor DS1621 Thermometer/Thermostat Functions － DS1621 温度计函 数 15. Philips PCF8563 Real Time Clock Functions － PCF8563 实时时钟函数 16. Philips PCF8583 Real Time Clock Functions － PCF8583 实时时钟函数 17. Dallas Semiconductor DS1302 Real Time Clock Functions － DS1302 实时时钟函数 18. Dallas Semiconductor DS1307 Real Time Clock Functions － DS1307 实时时钟函数 19. 1 Wire Protocol Functions － 单线通讯协议函数 20. Dallas Semiconductor DS1820/DS1822 Temperature Sensors Functions － DS1820/1822 温度传感器函数 21. SPI Functions － SPI 函数 22. Power Management Functions － 电源管理函数 23. Gray Code Conversion Functions － 格雷码转换函数
上传时间： 2013-10-22
上传用户：归海惜雪
Digitemp Jr. is a device that is designed to measure and report ambient temperature. When connected to an RS-232 port on any PC, it will periodically measure and report in ASCII form the ambient temperature in degrees Celsius. These temperature readings can be monitored with any terminal program. If the terminal program supports capture to disk, the temperature readings can be saved to disk for further analysis with a spreadsheet program or other data analysis tool. The simple ASCII output format of Digitemp Jr. makes it relatively easy to write custom software for receiving, recording, and analyzing ambient temperature data. Best of all, Digitemp Jr. requires no external power supplies or batteries. It is powered directly by the RS-232 port.
上传时间： 2013-10-20
上传用户：Maple
设计一种基于ATmega16L单片机的温度控制系统，阐述该系统的软硬件设计方案。采用模块化设计方法，利用增量式PID算法使被控对象的温度值趋于给定值。实验结果表明该系统具有良好的检测和控制功能。 Abstract: This paper designs a temperature control system based on ATmega16L，describes the hardware and software de－sign scheme of the system，adopts the modularized design method and utilizes the incremental PID algorithm to realize the temperature of controlled device incline to the given value.The experiment result indicates that the system has good detec－tion and control function
上传时间： 2013-10-09
上传用户：stvnash
