虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

ESD-Phenomena-and-the-Reliability

  • Electrostatic Discharge Protection

    Electrostatic discharge (ESD) is one of the most prevalent threats to the reliability of electronic components. It is an event in which a finite amount of charge is trans- ferred from one object (i.e., human body) to another (i.e., microchip). This process can result in a very high current passing through the microchip within a very short period of time, and, hence, more than 35% of chip damages can be attributed to an ESD-related event. As such, designing on-chip ESD structures to protect integrated circuits against the ESD stresses is a high priority in the semiconductor industry.

    标签: Electrostatic Protection Discharge

    上传时间: 2020-06-05

    上传用户:shancjb

  • US Navy VHDL Modelling Guide

      This document was developed under the Standard Hardware and Reliability Program (SHARP) TechnologyIndependent Representation of Electronic Products (TIREP) project. It is intended for use by VHSIC HardwareDescription Language (VHDL) design engineers and is offered as guidance for the development of VHDL modelswhich are compliant with the VHDL Data Item Description (DID DI-EGDS-80811) and which can be providedto manufacturing engineering personnel for the development of production data and the subsequent productionof hardware. Most VHDL modeling performed to date has been concentrated at either the component level orat the conceptual system level. The assembly and sub-assembly levels have been largely disregarded. Under theSHARP TIREP project, an attempt has been made to help close this gap. The TIREP models are based upon lowcomplexity Standard Electronic Modules (SEM) of the format A configuration. Although these modules are quitesimple, it is felt that the lessons learned offer guidance which can readily be applied to a wide range of assemblytypes and complexities.

    标签: Modelling Guide Navy VHDL

    上传时间: 2014-12-23

    上传用户:xinhaoshan2016

  • LT1017:Circuitry for Single Cell Operation

      Portable, battery-powered operation of electronic apparatushas become increasingly desirable. Medical, remotedata acquisition, power monitoring and other applicationsare good candidates for battery operation. In some circumstances,due to space, power or reliability considerations,it is preferable to operate the circuitry from a single 1.5Vcell. Unfortunately, a 1.5V supply eliminates almost alllinear ICs as design candidates. In fact, the LM10 opamp-reference and the LT®1017/LT1018 comparators arethe only IC gain blocks fully specifi ed for 1.5V operation.Further complications are presented by the 600mV dropof silicon transistors and diodes. This limitation consumesa substantial portion of available supply range, makingcircuit design diffi cult. Additionally, any circuit designedfor 1.5V operation must function at end-of-life batteryvoltage, typically 1.3V. (See Box Section, “Componentsfor 1.5V Operation.”)

    标签: Circuitry Operation Single 1017

    上传时间: 2013-12-20

    上传用户:Wwill

  • Circuitry for Single Cell Operation

      Portable, battery-powered operation of electronic apparatushas become increasingly desirable. Medical, remotedata acquisition, power monitoring and other applicationsare good candidates for batteryoperation. In some circumstances,due to space, power or reliability considerations,it is preferable to operate the circuitry from a single 1.5Vcell. Unfortunately, a 1.5V supply eliminates almost alllinear ICs as design candidates. In fact, the LM10 opamp-reference and the LT®1017/LT1018 comparators arethe only IC gain blocks fully specifi ed for 1.5V operation.Further complications are presented by the 600mV dropof silicon transistors and diodes. This limitation consumesa substantial portion of available supply range, makingcircuit design diffi cult. Additionally, any circuit designedfor 1.5V operation mustfunction at end-of-life batteryvoltage, typically 1.3V. (See Box Section, “Componentsfor 1.5V Operation.”)

    标签: Circuitry Operation Single Cell

    上传时间: 2013-10-30

    上传用户:hz07104032

  • 基于单片机系统的(24,16)循环码编码、译码方案

      在理论分析循环码编码和译码基本原理的基础上,提出了基于单片机系统的(24,16)循环码软件实现编码、译码的方案。仿真结果表明(24,16)循环码能有效地克服来自通讯信道的干扰,保证数据通信的可靠及系统的稳定,使误码率大幅度降低。本论文对(24,16)循环码的研究结果表明,可以有效地降低错误概率和提高系统的吞吐量,实现纠错仅需要在接收端增加有限的存储空间和计算复杂度,具有一定的实用价值。   Abstract:   Based on analyzing the theory of encoding and decoding of cyclic code, this paper showed the schemes of encoding and decoding of(24,16)cyclic code by the software and based on microcontroller. Simulation results show that using (24,16) cyclic codes can effectively overcome the interference from communication channel, ensure the reliability and stability of data communication systems, and reduce the bit error rate greatly. The results of this paper show that by using the (24,16) cyclic code, the error rate can be reduced and the system throughput can be improved. Meanwhile, the system only needs to enlarge limited storage space and computation the complexity at the receiving end to realize error correction. Thus the (24,16) cyclic code has a practical value.  

    标签: 24 16 单片机系统 循环码

    上传时间: 2013-11-09

    上传用户:gaoliangncepu

  • 基于C8051F040的以太网-CAN转换电路设计

    以太网和CAN总线应用广泛,但由于其通信协议不同,两种总线器件间无法进行数据通信,因此,设计了基于CP2200与C8051F040的以太网总线与CAN总线接口转换电路,并给出部分相关硬件电路与软件设计分析。在保证数据完整和协议可靠的前提下,通过握手协议和简化的以太网协议,不仅实现了以太网数据与CAN数据的转发,同时还顺利的解决了以太网的高速性与CAN的低速率冲突,以及两者数据包之间的大小不同的矛盾。 Abstract:  In the development of actual application, Ethernet and CAN bus are used very extensively. Owing to its various communication protocols, the communicating between two kinds of bus device can’t be carried out. Therefore, in order to solve this problem, the Ethernet-CAN bus interface circuit based on CP2200 and C8051F040 was designed in this paper, and part of the related hardware circuit and software design analysis were given. On the condition of data’s integrity and protocols’reliability, through the handshaking protocols and the simplified the Ethernet protocol, not only the data switching between CAN and Ethernet was realized, but also the differ in velocity and packet size was solved.

    标签: C8051F040 CAN 以太网 转换

    上传时间: 2013-10-15

    上传用户:Ants

  • 串行时钟PCF8583在微机保护装置中的应用

    实时时钟是微机保护装置的重要部件,在讨论PCF8583结构与功能的基础上,提出采用dsPIC33F系列微处理器与串行I2C时钟PCF8583的接口设计方案,给出了相应的接口电路与软件流程。该设计方案结构简单,可靠性高,开发周期短,具有一定的实用与参考价值。所设计的微机保护装置已投入现场运行,效果良好。 Abstract:  Real-time clock chip is an important part in microcomputer protection device.Based on discussing the structure and function of PCF8583,a new interface scheme which uses dsPIC33F microprocessor and serial clock chip(I2C)PCF8583is proposed.The method of the circuit design and the main software flow are introduced in this paper.The scheme has simple structure,higher reliability and shorter exploitation cycle,so has definite practicality or reference value.The microcomputer protection device has been put into operation with better effects.

    标签: 8583 PCF 串行时钟 中的应用

    上传时间: 2013-11-18

    上传用户:Thuan

  • 基于VHDL的微型打印机控制器设计

    介绍基于VHDL的微型打印机控制器的设计。论述了微型打印机的基本原理,以及实现控制器的VHDL语言设计。打印机的数据来自系统中的存储模块,根据需要控制打印。该微型打印机控制器可取代传统的微型打印机,且抗干扰性好,可靠性高,具有较强的移植性,稍加改动就可应用于不同场合。 Abstract:  This paper introduced the design method of micro printer controller based on VHDL.The basic principles of microprinter is explained,as well as the realization of the controller by VHDL language.The printer data is from the system memory modules,can control printer.The design of microprinter controller has antigood and high reliability,it can replace the traditional printer.The controller has very good portability,and need little modify that can use in different situation.

    标签: VHDL 微型打印机 制器设计

    上传时间: 2013-11-03

    上传用户:dudu1210004

  • 基于UC3854A控制的PFC中分岔现象仿真研究

       为深入了解基于UC3854A控制的PFC变换器中的动力学特性,研究系统参数变化对变换器中分岔现象的影响,在建立Boost PFC变换器双闭环数学模型的基础上,用Matlab软件对变换器中慢时标分岔及混沌等不稳定现象进行了仿真。在对PFC变换器中慢时标分岔现象仿真的基础上,分析了系统参数变化对分岔点的影响,并进行了仿真验证。仿真结果清晰地显示了输入整流电压的幅值变化对系统分岔点的影响。 Abstract:  In order to better understand the dynamics characteristic of power factor correction converter based on UC3854A, and make the way that parameters change influences the bifurcation phenomena of the system clearly. The math model of the two closed loop circuits to the Boost PFC (Power Factor Correction) converter controller was built. Then, with the help of Matlab, the simulation for nonlinear phenomena such as chaos and slow-scale bifurcation in the PFC converter was made. Finally the factors that have influence to the phenomenon of bifurcation under slow-scale in PFC converter were analyzed. The simulation results clearly show the parameters change influences the bifurcation point of the system.

    标签: 3854A 3854 PFC UC

    上传时间: 2013-10-17

    上传用户:杜莹12345

  • LS7266R1在电子式万能材料试验机中的应用

    针对材料试验机等设备中要求测量或控制材料拉伸或压缩的位移,一般采用光电轴角编码器检测位置信号,输出正交编码脉冲信号。若采用其他方法检测位置信号,必然导致电路设计复杂,可靠性降低。因此,提出一种基于LS7266R1的电子式万能材料试验机设计方案。给出了试验机中的控制器工作原理,LS7266R1与单片机的接口硬件设计,以及主程序软件流程图。巧妙地把力量传感器,位移传感器等机械运动状态的压力或拉力以及位置坐标,变成了电压信号和电脉冲数字信号,供A/D测量和LS7266R1计数,从而实现了独立完成材料试验控制或通过PC机串口命令完成材料试验控制。 Abstract:  Aiming at the requirement that the displacement of the tension and compression always be tested and controlled in the equipement such as material testing machine. The position signal was tested by photoelectric axial angle coder. Therefore, the paper proposes the design of electronic universal testing machine design based on LS7266R1. If the position signal detected by other methods, will inevitably lead to the circuit design complexity, reliability decreased. The work theory of the controller, the hardware interface design between LS7266R1 and single chip, and the flow chart of main program, are presented in this paper. The signal of the compression or tension power and displacement at working, which tested by power sensor and displacement sensor especially, is changed into electric voltage and electric pulse numerical signals. And these signals can be tested by A/D and counted by LS7266R1. Finally the test of the material properties can be controlled by itself, or controlled by the COM command of PC.

    标签: 7266R 7266 LS R1

    上传时间: 2013-11-02

    上传用户:yl1140vista