ASC8511 是开关式、单节锂电池充电管理芯片,采用峰值电流模控制的BUCK 拓扑结构，最大充电电流可达2.5A. ASC8511 通过恒压控制环（CV）和恒流控制环（CC）来调整锂电池充电电压和恒流充电电流.ASC8511 集成电池过温保护、充电时间限制、输出短路等保护功能，通过NTC 检测电池温度，可以实现电池过热保护功能，两个LED 指示灯指示电池充电状态.ASC8511 采用16 脚T-SSOP 封装. 特点 ● 充电电压精度0.5% ● 最大充电电流2.5A ● 自耗电小于5uA ● 电阻可编程调节恒流充电电流 ● 开关频率500KHZ ● 适用于单节锂电池充电 ● 软启动 ● 电池过温保护 ● 芯片过热保护 ● 状态指示 ● 环境温度范围: -20℃～70℃ ● 16 脚T-SSOP 封装 应用 ● 手持设备、POS机 ● MID、数码产品 ● 移动DVD ● 笔记本、对讲机
上传时间： 2013-11-22
上传用户：13788529953
UPS简介，IGBT在UPS中的应用 DC/AC逆变器，BOOST升压电路，AC/DC整流，充电电路 防止IGBT损坏措施
上传时间： 2013-12-03
上传用户：ly1994
随着功率开关器件的发展，电力电子装置日益小型化和高频化，电气性能大幅提高，但是随之产生的高次谐波却对电网造成严重污染。在电力电子设备中，整流器(AC／DC变流器)占有较大的比例，是主要的污染源。由于固态感应加热电源对于电网呈现非线性特性，从电网中输出的电流就不是标准的正弦曲线。高频谐波电流对电力设施产生过热或其他危害。 Boost电路应用到功率因数校正方面已经较为成熟，对于几百瓦小功率的功率因数校正，常规的电路是可以实现的。但是对于大功率诸如感应加热电源，还存在很多的实际问题。为了解决开关器件由于二极管反向恢复时产生的冲击电流而易损坏的情况，减少开关器件在高频下的开关损耗，本文采用一种无源无损缓冲电路取代传统的LC滤波电路。在分析了软开关电路的工作原理以及逆变模块的分时-移相功率控制策略后，应用Matlab软件进行了仿真，并通过实验结果验证了理论分析的正确性。
上传时间： 2014-12-24
上传用户：RQB123
1.先计算BUCK 电容的损耗（电容的内阻为Rbuck 假设为350mΩ，输入范围为85VAC~264VAC,频率为50Hz，POUT=60W,VOUT=60W）：
上传时间： 2013-12-24
上传用户：yd19890720
Linear Technology offers a variety of devices that simplifyconverting power from a USB cable, but the LTC®3455represents the highest level of functional integration yet. The LTC3455 seamlessly manages power flowbetween an AC adapter, USB cable and Li-ion battery,while complying with USB power standards, all from a4mm × 4mm QFN package. In addtion, two high efficiencysynchronous buck converters generate low voltage railswhich most USB-powered peripherals require. TheLTC3455 also provides power-on reset signals for themicroprocessor, a Hot SwapTM output for poweringmemory cards as well as an uncommitted gain blocksuitable for use as a low-battery comparator or an LDOcontroller. The PCB real estate required for the entire USBpower control circuit and two DC/DC converters is only225mm2.
上传时间： 2013-11-02
上传用户：名爵少年
DC/DC 升压IC：The FP6291 is a current mode boost DC-DC converter. Its PWM circuitry with built-in 0.25 Ω power MOSFET make this regulator highly power efficient. The internal compensation network also minimizes as much as 6 external component counts. The non-inverting input of error amplifier connects to a 0.6V precision reference voltage and internal soft-start function can reduce the inrush current. The FP6291 is available in the SOT23-6L package and provides space-saving PCB for the application fields.
上传时间： 2013-11-07
上传用户：3294322651
Video cable driver amplifi er output stages traditionallyrequire a supply voltage of at least 6V in order to providethe required output swing. This requirement is usuallymet with 5V supplies by adding a boost regulator or asmall local negative rail, say via the popular LT®1983-3.Such additional circuitry is unnecessary in typical 1VP-Pvideo connections, such as HD component video, if thecable driver amplifi ers simply offer near rail-to-rail outputcapability when powered from 5V.
上传时间： 2013-11-16
上传用户：yanyangtian
The LTC®3562 quad output step-down regulator is designedfor multicore handheld microprocessor applications thatoperate from a single Li-Ion battery. Its four monolithic, higheffi ciency buck regulators support Intel’s mobile CPU P-Stateand C-State energy saving operating modes. The outputvoltages are independently controllable via I2C, and eachoutput can be independently started and shut down. Designerscan choose from power saving pulse-skipping mode orBurst Mode® operation, or select low noise LDO mode. Thespace-saving LTC3562 is available in a 3mm × 3mm QFNpackage and requires few external components.
上传时间： 2013-10-07
上传用户：1583060504
The LTC®3569 is a compact power solution for handhelddevices. Its tiny 3mm × 3mm QFN package includesthree buck regulators with individually programmableoutput voltages. One regulator supports load currentsup to 1200mA, while the other two support currents to600mA. Two regulators can be paralleled for increasedload capability. Each current-mode regulator is internallycompensated with excellent load and line regulation. Acomplete 2- or 3-output solution requires a minimumof external passive components.
上传时间： 2013-10-11
上传用户：yxgi5
The LTC3546 is a dual output current mode buck regulatorwith fl exible output current partitioning. Beyondthe advantages normally associated with dual outputregulators (reduced size, cost, EMI and part count, withimproved effi ciency), the LTC3546’s outputs can bepartitioned for either 3A and 1A outputs, or two 2A outputs.This increases its application range and simplifi esmultiple supply rail designs. A confi gurable Burst Mode®clamp for each output sets the current transition levelbetween Burst Mode operation and forced continuousconduction mode to optimize effi ciency over the entireoutput range. An adjustable switching frequency up to4MHz and internal power MOSFET switches allow forsmall and compact footprints.
上传时间： 2013-11-04
上传用户：yxgi5
