Much has been written concerning the manner in which healthcare is changing, with a particular emphasis on how very large quantities of data are now being routinely collected during the routine care of patients. The use of machine learning meth- ods to turn these ever-growing quantities of data into interventions that can improve patient outcomes seems as if it should be an obvious path to take. However, the field of machine learning in healthcare is still in its infancy. This book, kindly supported by the Institution of Engineering andTechnology, aims to provide a “snap- shot” of the state of current research at the interface BETWEEN machine learning and healthcare.
标签： Technologies Healthcare Learning Machine
上传时间： 2020-06-10
上传用户：shancjb
Current field forecast verification measures are inadequate, primarily because they compress the comparison BETWEEN two complex spatial field processes into one number. Discrete wavelet transforms (DWTs) applied to analysis and contemporaneous forecast fields prove to be an insightful approach to verification problems. DWTs allow both filtering and compact physically interpretable partitioning of fields. These techniques are used to reduce or eliminate noise in the verification process and develop multivariate measures of field forecasting performance that are shown to improve upon existing verification procedures.
标签： field forecast verification
上传时间： 2020-07-22
上传用户：
%this is an example demonstrating the Radial Basis Function %if you select a RBF that supports it (Gausian, or 1st or 3rd order %polyharmonic spline), this also calculates a line integral BETWEEN two %points.
上传时间： 2021-07-02
上传用户：19800358905
The PW2228A is a high efficiency single inductor Buck-Boost converter which can supply theload current up to 1.5A. It provides auto-transition BETWEEN Buck and Boost Mode. The PW2228Aoperates at 2.4MHz switching frequency in CCM. DC/DC converter operates at Pulse-Skipping Modeat light load. The output voltage is programmable using an external resistor divider, or is fixed to3.3V internally. The load is disconnected from the VIN during shutdown.The PW2228A is available in TDFN3X3-10 package.
标签： pw2228a
上传时间： 2022-02-11
上传用户：
以仓库智能改造为背景,主要介绍单片机和上位机之间通信网络和通信协议的选择,MODBUS协议通信指令和功能码使用,重点阐述了基于RS-485总线的MODBUS通信协议在上位机和单片机之间的串行通信,实现上位机对单片机设备的远程控制和信息采集的功能。Based on the intelligent warehouse transformation as the background,mainly introduces BETWEEN MCU and PC communication network and the choice of communication protocol,instruction and the function code using the MODBUS protocol communication,expounds the MODBUS communication protocol based on RS-485 bus serial communication BETWEEN PC and single chip microcomputer,PC remote control of single chip computer equipment and the function of information collection.
上传时间： 2022-03-26
上传用户：
以STC12C5A60S2单片机为控制核心,采用2.4G(JF24D)无线遥控模块进行无线发射与接收,设计了一种双电机遥控船模控制系统.该系统通过切换档杆实现前进后退,方向盘左右转动、暂停按钮等控制直流电机的正转、反转、暂停,使得电机驱动的遥控船模实现前进后退、左右转向、暂停等功能,有效解决了驱动功率小和船模之间相互干扰等问题,可广泛应用于遥控船模领域.Using STC12C5A60S2 single-chip microcomputer as the controller and 2.4 G(JF24D)wireless remote control module for wireless transmission and reception, a dual-motor remote control ship model control system is designed. The system realizes forward and backward by switching the gear lever. The steering wheel rotates left and right and the pause button controls the forward, reverse and pause of the dc motor. The remote controller of ship model driven by the motor realizes forward and backward, left and right steering, pause and other functions. The ship model control system can effectively solve the problems of small driving power and mutual interference BETWEEN ship models, and can be widely used in the field of remote controller of ship model.
上传时间： 2022-03-27
上传用户：
以STM32F103单片机与STM32F103单片机之间进行SPI双机通信为例,直接使用DMA传输进行数据的发送与接收,最后通过实验证明了DMA传输的高效和准确性。with the SPI dual-MIC communication BETWEEN STM32F103 MCU and STM32F103 MCU taken as an example,data transmission and reception are carried out directly by using DMA transmission to prove the efficiency and accuracy of DMA transmission by experiments.
上传时间： 2022-03-27
上传用户：aben
设计了自动控制系统综合实验案例“基于LabVIEW和单片机的温度控制系统设计”。实验系统硬件部分由单片机、温度传感器、D/A转换模块、调压模块和电烤箱组成,设计了单片机与各个模块之间的接口电路。软件部分采用LabVIEW软件实现控制算法,并设计监控界面实现参数设定、温度数据实时监控等功能。设计了单片机与LabVIEW软件之间的串口通信程序,实现了输入、输出数据的传输。通过综合实验系统设计,使学生得到控制系统设计和实验调试等综合能力的训练。A comprehensive experimental case of the automatic control system is presented,which is the design of the temperature control system based on LabVIEW and SCM.The hardware part of the experimental system is composed of the SCM,temperature sensor,D/A conversion module,voltage regulating module and electric oven.The interface circuit BETWEEN the SCM and each module is designed.In the software part,LabVIEW software is used to realize the control algorithm,and the monitoring interface is designed to realize the functions of parameter setting,temperature data real-time monitoring,etc.The serial communication program BETWEEN the SCM and LabVIEW software is designed to realize the transmission of input and output data.Through the design of this comprehensive experimental system,students can get the comprehensive ability training for the control system design,experiment debugging,etc.
上传时间： 2022-03-27
上传用户：qdxqdxqdxqdx
本文首次设计并验证了基于macom三合一芯片设计的光模块电路,该电路旨在提供一种满足SFF-8472中规定的数字诊断功能的低成本SFP+模块。电路采用激光器驱动、限幅放大器、控制器以及时钟恢复单元集成的单芯片,在保证高精度数字诊断功能基础上,实现了低成本高可靠的特点。该电路在光接收接口组件与激光器驱动和限幅放大器单元的限幅放大器部分之间接入滤波器来提高模块的灵敏度及信号质量。在控制器单元的数字电位器的引脚上采用外加电阻的方式避免出现上电不发光的故障问题。该研究结果为下一代SFP-DD光模块设计与开发工作,奠定了一定的理论与实践基础。This paper designs and validates the optical module circuit based on the MACOM Trinity chip for the first time.This circuit aims to provide a low-cost SFP module which meets the digital diagnosis function specified in SFF-8472.The circuit uses a single chip integrated with laser driver,limiting amplifier,controller and clock recovery unit.On the basis of ensuring high precision digital diagnosis function,it achieves the characteristics of low cost and high reliability.The circuit connects a filter BETWEEN the optical receiving interface module and the limiting amplifier part of the laser driver and limiting amplifier unit to improve the sensitivity and signal quality of the module.The pin of the digital potentiometer in the controller unit is equipped with an external resistance to avoid the problem of power failure.The research results lay a theoretical and practical foundation for optical module design in high-speed data center.
上传时间： 2022-04-03
上传用户：
The GL823K integrates a high speed 8051 microprocessor and a high efficiency hardware engine for the best data transfer performance BETWEEN USB and flash card interfaces. Its pin assignment design fits to card sockets to provide easier PCB layout. Inside the chip, it integrates 5V to 3.3V regulator, 3.3V to 1.8V regulator and power MOSFETs and it enables the function of on-chip clock source (OCCS) which means no external 12MHz XTAL is needed and that effectively reduces the total BOM cost.
上传时间： 2022-04-27
上传用户：qdxqdxqdxqdx
