有关于T函数与B函数的一些总结，可以作为课件使用。
上传时间： 2015-11-10
上传用户：wangtianhe
/* ********************************************************************************************************* * uC/TCP-IP V2 * The Embedded TCP/IP Suite * * (c) Copyright 2003-2010; Micrium, Inc.; Weston, FL * * All rights reserved. Protected by international copyright laws. * * uC/TCP-IP is provided in source form to registered licensees ONLY. It is * illegal to distribute this source code to any third party unless you receive * written permission by an authorized Micrium representative. Knowledge of * the source code may NOT be used to develop a similar product. * * Please help us continue to provide the Embedded community with the finest * software available. Your honesty is greatly appreciated. * * You can contact us at www.micrium.com. ********************************************************************************************************* */ /* ********************************************************************************************************* * * NETWORK TCP LAYER * (TRANSMISSION CONTROL PROTOCOL) * * Filename : net_tcp.h * Version : V2.10 * Programmer(s) : ITJ ********************************************************************************************************* * Note(s) : (1) Supports Transmission Control Protocol as described in RFC #793 with the following * restrictions/constraints : * * (a) TCP Security & Precedence NOT supported RFC # 793, Section 3.6 * * (b) TCP Urgent Data NOT supported RFC # 793, Section 3.7 * 'The Communication of * Urgent Information' * * (c) The following TCP options NOT supported : * * (1) Window Scale RFC #1072, Section 2 * RFC #1323, Section 2 * (2) Selective Acknowledgement (SACK) RFC #1072, Section 3 * RFC #2018 * RFC #2883 * (3) TCP Echo RFC #1072, Section 4 * (4) Timestamp RFC #1323, Section 3.2 * (5) Protection Against Wrapped Sequences (PAWS) RFC #1323, Section 4 * * (d) #### IP-Options-to-TCP-Connection RFC #1122, Section 4.2.3.8 * Handling NOT supported * * (e) #### ICMP-Error-Message-to-TCP-Connection RFC #1122, Section 4.2.3.9 * Handling NOT currently supported * * (2) TCP Layer assumes/requires Network Socket Layer (see 'net_sock.h MODULE Note #1a2'). ********************************************************************************************************* */ /*$PAGE*/ /* ********************************************************************************************************* * MODULE * * Note(s) : (1) TCP Layer module is NOT required for UDP-to-Application API configuration. * * See also 'net_cfg.h TRANSPORT LAYER CONFIGURATION' * & 'net_cfg.h USER DATAGRAM PROTOCOL LAYER CONFIGURATION'. * * See also 'net_tcp.h Note #2'. * * (2) The following TCP-module-present configuration value MUST be pre-#define'd in * 'net_cfg_net.h' PRIOR to all other network modules that require TCP Layer * configuration (see 'net_cfg_net.h TCP LAYER CONFIGURATION Note #2b') : * * NET_TCP_MODULE_PRESENT ********************************************************************************************************* */ #ifdef NET_TCP_MODULE_PRESENT /* See Note #2. */ /* ********************************************************************************************************* * EXTERNS ********************************************************************************************************* */ #if ((defined(NET_TCP_MODULE)) && \ (defined(NET_GLOBALS_EXT))) #define NET_TCP_EXT #else #define NET_TCP_EXT extern #endif /*$PAGE*/ /* ********************************************************************************************************* * DEFINES ********************************************************************************************************* */ /* ********************************************************************************************************* * TCP HEADER DEFINES * * Note(s) : (1) The following TCP value MUST be pre-#define'd in 'net_def.h' PRIOR to 'net_buf.h' so that * the Network Buffer Module can configure maximum buffer header size (see 'net_def.h TCP * LAYER DEFINES' & 'net_buf.h NETWORK BUFFER INDEX & SIZE DEFINES Note #1') : * * (a) NET_TCP_HDR_SIZE_MAX 60 (NET_TCP_HDR_LEN_MAX * * NET_TCP_HDR_LEN_WORD_SIZE) * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_LEN_MASK 0xF000u #define NET_TCP_HDR_LEN_SHIFT 12u #define NET_TCP_HDR_LEN_NONE 0u #define NET_TCP_HDR_LEN_MIN 5u #define NET_TCP_HDR_LEN_MAX 15u #define NET_TCP_HDR_LEN_WORD_SIZE CPU_WORD_SIZE_32 #define NET_TCP_HDR_SIZE_MIN (NET_TCP_HDR_LEN_MIN * NET_TCP_HDR_LEN_WORD_SIZE) #if 0 /* See Note #1a. */ #define NET_TCP_HDR_SIZE_MAX (NET_TCP_HDR_LEN_MAX * NET_TCP_HDR_LEN_WORD_SIZE) #endif #define NET_TCP_HDR_SIZE_TOT_MIN (NET_IP_HDR_SIZE_TOT_MIN + NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_SIZE_TOT_MAX (NET_IP_HDR_SIZE_TOT_MAX + NET_TCP_HDR_SIZE_MAX) #define NET_TCP_PSEUDO_HDR_SIZE 12u /* = sizeof(NET_TCP_PSEUDO_HDR) */ #define NET_TCP_PORT_NBR_RESERVED NET_PORT_NBR_RESERVED #define NET_TCP_PORT_NBR_NONE NET_TCP_PORT_NBR_RESERVED #define NET_TCP_HDR_URG_PTR_NONE 0x0000u /* See Note #2. */ /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER FLAG DEFINES * * Note(s) : (1) See 'TCP HEADER Note #2' for flag fields. * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_FLAG_MASK 0x0FFFu #define NET_TCP_HDR_FLAG_NONE DEF_BIT_NONE #define NET_TCP_HDR_FLAG_RESERVED 0x0FE0u /* MUST be '0'. */ #define NET_TCP_HDR_FLAG_URGENT DEF_BIT_05 /* See Note #2. */ #define NET_TCP_HDR_FLAG_ACK DEF_BIT_04 #define NET_TCP_HDR_FLAG_PUSH DEF_BIT_03 #define NET_TCP_HDR_FLAG_RESET DEF_BIT_02 #define NET_TCP_HDR_FLAG_SYNC DEF_BIT_01 #define NET_TCP_HDR_FLAG_FIN DEF_BIT_00 #define NET_TCP_HDR_FLAG_CLOSE NET_TCP_HDR_FLAG_FIN /* ********************************************************************************************************* * TCP FLAG DEFINES ********************************************************************************************************* */ /* ------------------ NET TCP FLAGS ------------------- */ #define NET_TCP_FLAG_NONE DEF_BIT_NONE #define NET_TCP_FLAG_USED DEF_BIT_00 /* TCP conn cur used; i.e. NOT in free TCP conn pool. */ /* ------------------ TCP TX FLAGS ------------------- */ /* TCP tx flags copied from TCP hdr flags. */ #define NET_TCP_FLAG_TX_FIN NET_TCP_HDR_FLAG_FIN #define NET_TCP_FLAG_TX_CLOSE NET_TCP_FLAG_TX_FIN #define NET_TCP_FLAG_TX_SYNC NET_TCP_HDR_FLAG_SYNC #define NET_TCP_FLAG_TX_RESET NET_TCP_HDR_FLAG_RESET #define NET_TCP_FLAG_TX_PUSH NET_TCP_HDR_FLAG_PUSH #define NET_TCP_FLAG_TX_ACK NET_TCP_HDR_FLAG_ACK #define NET_TCP_FLAG_TX_URGENT NET_TCP_HDR_FLAG_URGENT #define NET_TCP_FLAG_TX_BLOCK DEF_BIT_07 /* ------------------ TCP RX FLAGS ------------------- */ #define NET_TCP_FLAG_RX_DATA_PEEK DEF_BIT_08 #define NET_TCP_FLAG_RX_BLOCK DEF_BIT_15 /*$PAGE*/ /* ********************************************************************************************************* * TCP TYPE DEFINES * * Note(s) : (1) NET_TCP_TYPE_&&& #define values specifically chosen as ASCII representations of the TCP * types. Memory displays of TCP types will display with their chosen ASCII names. ********************************************************************************************************* */ /* ------------------ NET TCP TYPES ------------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x20504354u /* "TCP " in ASCII. */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x43542050u /* "TCP " in ASCII. */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #endif #endif /* ********************************************************************************************************* * TCP SEQUENCE NUMBER DEFINES * * Note(s) : (1) TCP initial transmit sequence number is incremented by a fixed value, preferably a large * prime value or a large value with multiple unique factors. * * (a) One reasonable TCP initial transmit sequence number increment value example : * * 65527 = 37 * 23 * 11 * 7 * * * #### NET_TCP_TX_SEQ_NBR_CTR_INC could be developer-configured in 'net_cfg.h'. * * See also 'NET_TCP_TX_GET_SEQ_NBR() Notes #1b2 & #1c2'. ********************************************************************************************************* */ #define NET_TCP_SEQ_NBR_NONE 0u #define NET_TCP_ACK_NBR_NONE NET_TCP_SEQ_NBR_NONE #define NET_TCP_TX_SEQ_NBR_CTR_INC 65527u /* See Note #1. */ #define NET_TCP_ACK_NBR_DUP_WIN_SIZE_SCALE 4 /*$PAGE*/ /* ********************************************************************************************************* * TCP DATA/TOTAL LENGTH DEFINES * * Note(s) : (1) (a) TCP total length #define's (NET_TCP_TOT_LEN) relate to the total size of a complete * TCP packet, including the packet's TCP header. Note that a complete TCP packet MAY * be fragmented in multiple Internet Protocol packets. * * (b) TCP data length #define's (NET_TCP_DATA_LEN) relate to the data size of a complete * TCP packet, equal to the total TCP packet length minus its TCP header size. Note * that a complete TCP packet MAY be fragmented in multiple Internet Protocol packets. ********************************************************************************************************* */ /* See Notes #1a & #1b. */ #define NET_TCP_DATA_LEN_MIN 0u #define NET_TCP_TOT_LEN_MIN (NET_TCP_HDR_SIZE_MIN + NET_TCP_DATA_LEN_MIN) #define NET_TCP_TOT_LEN_MAX (NET_IP_TOT_LEN_MAX - NET_IP_HDR_SIZE_MIN ) #define NET_TCP_DATA_LEN_MAX (NET_TCP_TOT_LEN_MAX - NET_TCP_HDR_SIZE_MIN) /*$PAGE*/ /* ********************************************************************************************************* * TCP SEGMENT SIZE DEFINES * * Note(s) : (1) (a) RFC # 879, Section 3 states that the TCP Maximum Segment Size "counts only * data octets in the segment, ... not the TCP header or the IP header". * * (b) RFC #1122, Section 4.2.2.6 requires that : * * (1) "The MSS value to be sent in an MSS option must be less than or equal to * * (A) MMS_R - 20 * * where MMS_R is the maximum size for a transport-layer message that can * be received." * * (2) "If an MSS option is not received at connection setup, TCP MUST assume a * default send MSS of 536 (576 - 40)." * * See also 'net_ip.h IP DATA/TOTAL LENGTH DEFINES Note #1'. ********************************************************************************************************* */ /* See Note #1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT (NET_IP_MAX_DATAGRAM_SIZE_DFLT - NET_IP_HDR_SIZE_MIN - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_MAX_SEG_SIZE_DFLT_RX NET_TCP_DATA_LEN_MAX /* See Note #1b1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT_TX NET_TCP_MAX_SEG_SIZE_DFLT /* See Note #1b2. */ #define NET_TCP_MAX_SEG_SIZE_NONE 0u #define NET_TCP_MAX_SEG_SIZE_MIN NET_TCP_MAX_SEG_SIZE_DFLT #define NET_TCP_MAX_SEG_SIZE_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_MIN NET_TCP_DATA_LEN_MIN #define NET_TCP_SEG_LEN_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_SYNC 1u #define NET_TCP_SEG_LEN_FIN 1u #define NET_TCP_SEG_LEN_CLOSE NET_TCP_SEG_LEN_FIN #define NET_TCP_SEG_LEN_ACK 0u #define NET_TCP_SEG_LEN_RESET 0u #define NET_TCP_SEG_LEN_PROBE 0u #define NET_TCP_DATA_LEN_TX_SYNC 0u #define NET_TCP_DATA_LEN_TX_FIN 0u #define NET_TCP_DATA_LEN_TX_CLOSE NET_TCP_DATA_LEN_TX_FIN #define NET_TCP_DATA_LEN_TX_ACK 0u #define NET_TCP_DATA_LEN_TX_PROBE_NO_DATA 0u #define NET_TCP_DATA_LEN_TX_PROBE_DATA 1u #define NET_TCP_DATA_LEN_TX_RESET 0u #define NET_TCP_TX_PROBE_DATA 0x00u /* ********************************************************************************************************* * TCP WINDOW SIZE DEFINES * * Note(s) : (1) Although NO RFC specifies the absolute minimum TCP connection window size value allowed, * RFC #793, Section 3.7 'Data Communication : Managing the Window' states that for "the * window ... there is an assumption that this is related to the currently available data * buffer space available for this connection". ********************************************************************************************************* */ #define NET_TCP_WIN_SIZE_NONE 0u #define NET_TCP_WIN_SIZE_MIN NET_TCP_MAX_SEG_SIZE_MIN #define NET_TCP_WIN_SIZE_MAX DEF_INT_16U_MAX_VAL /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER OPTIONS DEFINES * * Note(s) : (1) See the following RFC's for TCP options summary : * * (a) RFC # 793, Section 3.1 'Header Format : Options' * (b) RFC #1122; Sections 4.2.2.5, 4.2.2.6 * * (2) TCP option types are encoded in the first octet for each TCP option as follows : * * -------- * | TYPE | * -------- * * The TCP option type value determines the TCP option format : * * (a) The following TCP option types are single-octet TCP options -- i.e. the option type * octet is the ONLY octet for the TCP option. * * (1) TYPE = 0 End of Options List * (2) TYPE = 1 No Operation * * * (b) All other TCP options MUST be multi-octet TCP options (see RFC #1122, Section 4.2.2.5) : * * ------------------------------ * | TYPE | LEN | TCP OPT | * ------------------------------ * * where * TYPE Indicates the specific TCP option type * LEN Indicates the total TCP option length, in octets, including * the option type & the option length octets * TCP OPT Additional TCP option octets, if any, that contain the remaining * TCP option information * * The following TCP option types are multi-octet TCP options where the option's second * octet specify the total TCP option length, in octets, including the option type & the * option length octets : * * (1) TYPE = 2 Maximum Segment Size See RFC # 793, Section 3.1 'Header Format : * Options : Maximum Segment Size'; * RFC #1122, Section 4.2.2.6; * RFC # 879, Section 3 * * (2) TYPE = 3 Window Scale See 'net_tcp.h Note #1c1' * (3) TYPE = 4 SACK Allowed See 'net_tcp.h Note #1c2' * (4) TYPE = 5 SACK Option See 'net_tcp.h Note #1c2' * (5) TYPE = 6 Echo Request See 'net_tcp.h Note #1c3' * (6) TYPE = 7 Echo Reply See 'net_tcp.h Note #1c3' * (7) TYPE = 8 Timestamp See 'net_tcp.h Note #1c4' * * (3) TCP header allows for a maximum option list length of 40 octets : * * NET_TCP_HDR_OPT_SIZE_MAX = NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN * * = 60 - 20 * * = 40 * * (4) 'NET_TCP_OPT_SIZE' MUST be pre-defined PRIOR to all definitions that require TCP option * size data type. ********************************************************************************************************* */ /*$PAGE*/ #define NET_TCP_HDR_OPT_END_LIST 0u #define NET_TCP_HDR_OPT_NOP 1u #define NET_TCP_HDR_OPT_MAX_SEG_SIZE 2u #define NET_TCP_HDR_OPT_WIN_SCALE 3u #define NET_TCP_HDR_OPT_SACK_PERMIT 4u #define NET_TCP_HDR_OPT_SACK 5u #define NET_TCP_HDR_OPT_ECHO_REQ 6u #define NET_TCP_HDR_OPT_ECHO_REPLY 7u #define NET_TCP_HDR_OPT_TS 8u #define NET_TCP_HDR_OPT_PAD NET_TCP_HDR_OPT_END_LIST #define NET_TCP_HDR_OPT_LEN_END_LIST 1u #define NET_TCP_HDR_OPT_LEN_NOP 1u #define NET_TCP_HDR_OPT_LEN_MAX_SEG_SIZE 4u #define NET_TCP_HDR_OPT_LEN_WIN_SCALE 3u #define NET_TCP_HDR_OPT_LEN_SACK_PERMIT 2u #define NET_TCP_HDR_OPT_LEN_ECHO_REQ 6u #define NET_TCP_HDR_OPT_LEN_ECHO_REPLY 6u #define NET_TCP_HDR_OPT_LEN_TS 10u #define NET_TCP_HDR_OPT_LEN_SACK_MIN 6u #define NET_TCP_HDR_OPT_LEN_SACK_MAX 38u #define NET_TCP_HDR_OPT_LEN_MIN 1u #define NET_TCP_HDR_OPT_LEN_MIN_LEN 2u #define NET_TCP_HDR_OPT_LEN_MAX 38u typedef CPU_INT32U NET_TCP_OPT_SIZE; /* TCP opt size data type (see Note #4). */ #define NET_TCP_HDR_OPT_SIZE_WORD (sizeof(NET_TCP_OPT_SIZE)) #define NET_TCP_HDR_OPT_SIZE_MAX (NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_OPT_NBR_MIN 0u #define NET_TCP_HDR_OPT_NBR_MAX (NET_TCP_HDR_OPT_SIZE_MAX / NET_TCP_HDR_OPT_SIZE_WORD) #define NET_TCP_HDR_OPT_IX NET_TCP_HDR_SIZE_MIN /*$PAGE*/ /* ********************************************************************************************************* * TCP OPTION CONFIGURATION TYPE DEFINES * * Note(s) : (1) NET_TCP_OPT_CFG_TYPE_&&& #define values specifically chosen as ASCII representations of * the TCP option configuration types. Memory displays of TCP option configuration buffers * will display the TCP option configuration TYPEs with their chosen ASCII names. ********************************************************************************************************* */ /* ---------------- TCP OPT CFG TYPES ----------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_OPT_CFG_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x2053534Du /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x204E4957u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x504B4353u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x4B434153u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x51455245u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4F484345u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x20205354u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x534D2053u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x4957204Eu /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x4353504Bu /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x41534B43u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x52455145u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x43454F48u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x53542020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #endif #endif /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION TIMEOUT DEFINES * * Note(s) : (1) (a) (1) RFC #1122, Section 4.2.2.13 'DISCUSSION' states that "the graceful close algorithm * of TCP requires that the connection state remain defined on (at least) one end of * the connection, for a timeout period of 2xMSL ... During this period, the (remote * socket, local socket) pair that defines the connection is busy and cannot be reused". * * (2) The following sections reiterate that the TIME-WAIT state timeout scalar is two * maximum segment lifetimes (2 MSL) : * * (A) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check Sequence Number : TIME-WAIT STATE' * (B) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check FIN Bit : TIME-WAIT STATE' * * (b) (1) RFC #793, Section 3.3 'Sequence Numbers : Knowing When to Keep Quiet' states that * "the Maximum Segment Lifetime (MSL) is ... to be 2 minutes. This is an engineering * choice, and may be changed if experience indicates it is desirable to do so". * * (2) Microsoft Corporation's Windows XP defaults MSL to 15 seconds. ********************************************************************************************************* */ /* Max seg timeout (see Note #1b) : */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC ( 0u ) /* ... min = 0 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC ( 2u * DEF_TIME_NBR_SEC_PER_MIN) /* ... max = 2 minutes */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_DFLT_SEC ( 15u ) /* ... dflt = 15 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_SCALAR 2u /* ... scalar (see Note #1a). */ #define NET_TCP_CONN_TIMEOUT_CONN_DFLT_SEC (120u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt conn timeout = 120 minutes */ #define NET_TCP_CONN_TIMEOUT_USER_DFLT_SEC ( 30u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt user timeout = 30 minutes */ /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION STATES * * Note(s) : (1) See the following RFC's for TCP state machine summary : * * (a) RFC # 793; Sections 3.2, 3.4, 3.5, 3.9 * (b) RFC #1122; Sections 4.2.2.8, 4.2.2.10, 4.2.2.11, 4.2.2.13, 4.2.2.18, 4.2.2.20 * * (2) (a) #### Additional closing-data-available state used for closing connections to allow the * application layer to receive any remaining data. * * See also 'net_tcp.c NetTCP_RxPktConnHandlerFinWait1() Note #2f5A2', * 'net_tcp.c NetTCP_RxPktConnHandlerFinWait2() Note #2f5B', * 'net_tcp.c NetTCP_RxPktConnHandlerClosing() Note #2d2B2a1B', * & 'net_tcp.c NetTCP_RxPktConnHandlerLastAck() Note #2d2A1b'. ********************************************************************************************************* */ #define NET_TCP_CONN_STATE_NONE 0u #define NET_TCP_CONN_STATE_FREE 1u #define NET_TCP_CONN_STATE_CLOSED 10u #define NET_TCP_CONN_STATE_LISTEN 20u #define NET_TCP_CONN_STATE_SYNC_RXD 30u #define NET_TCP_CONN_STATE_SYNC_RXD_PASSIVE 31u #define NET_TCP_CONN_STATE_SYNC_RXD_ACTIVE 32u #define NET_TCP_CONN_STATE_SYNC_TXD 35u #define NET_TCP_CONN_STATE_CONN 40u #define NET_TCP_CONN_STATE_FIN_WAIT_1 50u #define NET_TCP_CONN_STATE_FIN_WAIT_2 51u #define NET_TCP_CONN_STATE_CLOSING 52u #define NET_TCP_CONN_STATE_TIME_WAIT 53u #define NET_TCP_CONN_STATE_CLOSE_WAIT 55u #define NET_TCP_CONN_STATE_LAST_ACK 56u #define NET_TCP_CONN_STATE_CLOSING_DATA_AVAIL 59u /* See Note #2a. */ /* ********************************************************************************************************* * TCP CONNECTION QUEUE STATES ********************************************************************************************************* */ #define NET_TCP_RX_Q_STATE_NONE 0u #define NET_TCP_RX_Q_STATE_CLOSED 100u #define NET_TCP_RX_Q_STATE_CLOSING 101u #define NET_TCP_RX_Q_STATE_SYNC 110u #define NET_TCP_RX_Q_STATE_CONN 111u #define NET_TCP_TX_Q_STATE_NONE 0u #define NET_TCP_TX_Q_STATE_CLOSED 200u #define NET_TCP_TX_Q_STATE_CLOSING 201u #define NET_TCP_TX_Q_STATE_SYNC 210u #define NET_TCP_TX_Q_STATE_CONN 211u #define NET_TCP_TX_Q_STATE_SUSPEND 215u #define NET_TCP_TX_Q_STATE_CLOSED_SUSPEND 220u #define NET_TCP_TX_Q_STATE_CLOSING_SUSPEND 221u /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION CODE DEFINES **************
上传时间： 2015-11-22
上传用户：the same kong
Received: from mail.creditcard.cmbc.com.cn (unknown [111.205.122.39]) by newmx82.qq.com (NewMx) with SMTP id for <714620454@QQ.COM>; Fri, 20 Oct 2017 03:56:09 +0800 X-QQ-FEAT: nHaaMjwLeTyzuDp5C5V++RVfPHSVEqOujK0vwZroSro= X-QQ-MAILINFO: MjJD59SVx+LnQ1oU2sDuZ8tZJyZAOGTJaybWFAYRjurknrZoc6gjmnU06 o+pkiTJsdtxgA5CmtpN2ggrWb/T2GoG07QFXqgJtIk+5X1iaz4UykQ9M2a782+Fdn83doxC 4Ej1t99JoZcj8dDkeM5dzZTSR8uZGwHEnIK9Uim+NcaroB2EUWgclSmSzIxUHIbJ1nTLA8G B4/wa X-QQ-mid: mx82t1508442969ti70kc84u X-QQ-ORGSender: master@creditcard.cmbc.com.cn Received: from sedm([195.203.59.13]) by mail.creditcard.cmbc.com.cn(1.0) with SMTP id sedm587; Thu, 19 Oct 2017 17:48:11 +0800 Date:Thu, 19 Oct 2017 17:48:11 +0800 (CST) Message-ID:<0305-euid-31911508406491578> To:=?gbk?B?zsTS1SDFrsq/?=<714620454@QQ.COM> From:master<master@creditcard.cmbc.com.cn> Subject: =?gbk?B?w/HJ+tDF08O/qDIwMTfE6jEw1MK159fTttTVy7Wl?= X-Priority: 3 X-MSMail-Priority: Normal MIME-Version: 1.0 Content-Type: multipart/related; boundary="****MAIN_BOUNDARY****2727BD00F7949069C75FEDD44F1F2988" This is a multi-part message in MIME format. --****MAIN_BOUNDARY****2727BD00F7949069C75FEDD44F1F2988 Content-Type: multipart/alternative; boundary="****SUB_BOUNDARY****2727BD00F7949069C75FEDD44F1F2988" --****SUB_BOUNDARY****2727BD00F7949069C75FEDD44F1F2988 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: base64
标签： 源代码
上传时间： 2017-11-17
上传用户：wendingchang
100-24c02记忆开机次数101-24c02存储上次使用中状态102-DS1302 时钟原理103-DS1302可调时钟104-DS1302时钟串口自动更新时间105-1602液晶显示DS1302时钟106-字库ST7920 12864液晶基础显示107-按键 12864显示108-PCF8591 1路AD数码管显示109-PCF8591 4路AD数码管显示11-LED循环右移110-PCF8591 DA输出模拟111-PCF8591 输出锯齿波112-PCF8591 1602液晶显示113-串口通讯114-串口通讯中断应用115-RS485基本通讯原理116-红外接收原理117-红外解码数码管显示118-红外解码1602液晶显示119-红外发射原理12-查表显示LED灯120-红外收发测试121-双红外发射避障原理测试122-1个18B20 温度传感器 数码管显示123-1个18b20温度传感器1602液晶显示124-多个18b20温度传感器1602液晶显示125-超温报警测试126-温度可调上下限1602126-温度可调上下限1602显示127-PS2键盘输入1602液晶显示128-双色点阵1种颜色显示测试129-双色点阵2种颜色显示测试13-双灯左移右移闪烁130-双色点阵显示特定图形131-双色点阵交替图形显示132-双色点阵双色交替动态显示133-热敏电阻测试数码管显示134-光敏电阻测试数码管显示135-自动调光测试136-串转并数字芯片测试137-非门数字芯片测试138-电子琴139-实用99分钟倒计时器14-花样灯140-外部频率测试141-定时做普通时钟可调142-1602液晶显示的密码锁143-实用密码锁144-1602液晶显示的计算器145-秒表146-串口测温电脑显示147-交通灯测试148-点阵模拟电梯上行下行149-点阵流动广告模拟15-PWM调光150-综合测试程序151-12位AD_DS1621与12864液晶152-闪烁灯一153-闪烁灯二154-流水灯A155-51单片机12864大液晶屏proteus仿真156-流水灯B157-数码管显示158-12864LCD显示计算器键盘按键实验159-数码管显示（锁存器）16-共阳数码管静态显示160-数码管动态显示161-数码管滚动显示162-数码管字符显示163-独立按键164-矩阵键盘165-矩阵键盘(LCD)166-用DS1302与12864LCD设计的可调式中文电子日历167-定时器的使用(方式1)168-12864LCD图形滚动演示169-用PG12864LCD设计的指针式电子钟17-1个共阳数码管显示变化数字170-定时器的使用(方式2)171-外部中断的使用172-定时器和外部中断173-开关控制12864LCD串行模式显示174-点阵显示175-液晶1602显示176-12864带字库测试程序177-串行12864显示178-遥控键值解码-12864LCD显示179-液晶12864并行18-单个数码管模拟水流180-液晶12864并行2181-串口发送试验182-串口接收试验183-串口接收（1602）184-蜂鸣器发声185-直流电机调速186-蜂鸣器间断发声187-lcd-12864应用188-继电器控制189-直流电机调速19-按键控制单个数码管显示190-步进电机191-存储AT24C02192-PCF8591T AD实验193-PCF8591T芯片DA实验194-温度采集DS18B20195-EEPROM_24C02196-12864LCD显示24C08保存的开机画面197-红外解码198-12864LCD显示EPROM2764保存的开机画面199-时钟DS1302(LCD)2-IO输出-点亮1个LED灯方法220-单个数码管指示逻辑电平200-宏晶看门狗201-SD卡202-秒表203-普通定时器时钟204-彩屏控制205-彩屏图片显示206-12864+DS1302时钟+18B20温度计207-12864测试程序208-12864串行驱动演示209-12864生产厂程序21-8位数码管显示其中之一210-12864中文显示测试211-LCD12864212-12864M液晶显示(有字库)程序（汇编）213-超声波测距LCD12864显示214-红外遥控键值解码12864液晶显示（汇编语言）215-用DS1302与12864LCD设计的可调式中文电子日历216-中文12864217-中文12864LCD显示红外遥控解码实验218-IO端口输出219-IO端口输入22-8位数码管静态显示其中之二220-流水灯221-数码管显示222-数码管动态扫描演示223-独立按键224-独立按键去抖动225-定时器0226-定时器1227-定时器2228-外部中断0电平触发229-外部中断0边沿触发23-8位数码管动态扫描显示230-外部中断1231-矩阵键盘232-液晶LCM1602233-LCD1602动态显示234-EEPROM24c02235-开机次数记忆236-红外解码LCD1602液晶显示237-红外解码数码管显示238-喇叭239-液晶背光控制24-8位数码管动态扫描原理演示240-与电脑串口通信241-步进电机242-字库LCD12864液晶测试243-液晶数码综合显示244-99秒计时245-99倒计时246-抢答器247-PWM调光248-LED点阵249-直流电机调速25-数码管显示动态数据250-按键计数器251-秒表252-数码管移动253-花样灯254-红绿灯255-音乐播放256-红外收发演示257-普通定时器时钟258-继电器控制259-ps2键盘LCD1602液晶显示26-9累加260-RTC实时时钟DS1302液晶显示261-单线温度传感器18b20262-串口测温263-带停机 步进电机正反转264-步进电机正反转265-AD_DA_PCF8591266-液晶AD_DA_PCF8591267-秒手动记数268-功能感受269-流水登27-99累加270-点亮一个二极管271-用单片机控制一个灯闪烁272-将P1口状态送入P0、P2、P3273-P3口流水灯274-通过对P3口地址的操作流水点亮8位LED275-用不同数据类型控制灯闪烁时间276-用P0口、P1 口分别显示加法和减法运算结果277-用P0、P1口显示乘法运算结果278-用P1、P0口显示除法运算结果279-用自增运算控制P0口8位LED流水花样28-999累加280-用P0口显示逻辑与运算结果281-用P0口显示条件运算结果282-用P0口显示按位异或运算结果283-用P0显示左移运算结果284-万能逻辑电路实验285-用右移运算流水点亮P1口8位LED286-用if语句控制P0口8位LED的流水方向287-用swtich语句的控制P0口8位LED的点亮状态288-用for语句控制蜂鸣器鸣笛次数289-包含单片机寄存器的头文件29-9999累加290-用do-while语句控制P0口8位LED流水点亮291-用字符型数组控制P0口8位LED流水点亮292-用P0口显示字符串常量293-用P0 口显示指针运算结果294-用指针数组控制P0口8位LED流水点亮295-用数组的指针控制P0 口8 位LED流水点亮296-用P0 、P1口显示整型函数返回值297-用有参函数控制P0口8位LED流水速度298-用数组作函数参数控制流水花样299-用数组作函数参数控制流水花样3-IO输出-点亮多个LED灯方法130-9累减300-用函数型指针控制P1口灯花样31-99累减32-999累减33-9999累减34-显示小数点35-数码管消隐36-数码管递加递减带消隐37-数码管左移38-数码管右移38-数码管右移139-数码管右移24-IO输出-点亮多个LED灯方法240-数码管循环左移41-数码管循环右移41-数码管循环右移142-数码管循环右移243-数码管闪烁44-数码管局部闪烁45-定时器046-定时器147-定时器248-产生1mS方波49-产生200mS方波5-闪烁1个LED50-产生多路不同频率方波51-1个独立按键控制LED52-1个独立按键控制LED状态转换53-2按键加减操作53-2按键加减操作数码管显示54-多位数按键加减（闪烁）54-多位数按键加减（闪烁）数码管显示55-多位数按键加减（不闪烁）55-多位数按键加减（不闪烁）数码管显示56-定时器扫描数码管（不闪烁）57-按键长按短按效果58-抢答器59-独立按键依次输入数据6-不同频率闪烁1个LED灯60-按键从右至左输入61-8位端口检测8独立按键62-矩阵键盘行列扫描63-矩阵键盘反转扫描64-矩阵键盘中断扫描65-矩阵键盘密码锁66-矩阵键盘简易计算器67-外部中断0电平触发68-外部中断1电平触发69-外部中断0下降沿触发7-不同频率闪烁多个LED灯70-外部中断1下降沿触发71-T0外部计数输入72-T1外部计数输入73-看门狗溢出测试74-按键喂狗75-喇叭发声原理76-警车声音77-救护车声音78-喇叭滴答声79-报警发声8-8位LED左移80-消防车警报81-音乐播放82-步进电机转动原理83-步进电机正反转84-步进电机按键控制85-步进电机转
上传时间： 2021-11-08
上传用户：
C51单片机设计C语言实例（400例）合集 大量设计实例，新手必备C51源码,1-IO输出-点亮1个LED灯方法110-LED循环左移100-24c02记忆开机次数101-24c02存储上次使用中状态102-DS1302 时钟原理103-DS1302可调时钟104-DS1302时钟串口自动更新时间105-1602液晶显示DS1302时钟106-字库ST7920 12864液晶基础显示107-按键 12864显示108-PCF8591 1路AD数码管显示109-PCF8591 4路AD数码管显示11-LED循环右移110-PCF8591 DA输出模拟111-PCF8591 输出锯齿波112-PCF8591 1602液晶显示113-串口通讯114-串口通讯中断应用115-RS485基本通讯原理116-红外接收原理117-红外解码数码管显示118-红外解码1602液晶显示119-红外发射原理12-查表显示LED灯120-红外收发测试121-双红外发射避障原理测试122-1个18B20 温度传感器 数码管显示123-1个18b20温度传感器1602液晶显示124-多个18b20温度传感器1602液晶显示125-超温报警测试126-温度可调上下限1602126-温度可调上下限1602显示127-PS2键盘输入1602液晶显示128-双色点阵1种颜色显示测试129-双色点阵2种颜色显示测试13-双灯左移右移闪烁130-双色点阵显示特定图形131-双色点阵交替图形显示132-双色点阵双色交替动态显示133-热敏电阻测试数码管显示134-光敏电阻测试数码管显示135-自动调光测试136-串转并数字芯片测试137-非门数字芯片测试138-电子琴139-实用99分钟倒计时器14-花样灯140-外部频率测试141-定时做普通时钟可调142-1602液晶显示的密码锁143-实用密码锁144-1602液晶显示的计算器145-秒表146-串口测温电脑显示147-交通灯测试148-点阵模拟电梯上行下行149-点阵流动广告模拟15-PWM调光150-综合测试程序151-12位AD_DS1621与12864液晶152-闪烁灯一153-闪烁灯二154-流水灯A155-51单片机12864大液晶屏proteus仿真156-流水灯B157-数码管显示158-12864LCD显示计算器键盘按键实验159-数码管显示（锁存器）16-共阳数码管静态显示160-数码管动态显示161-数码管滚动显示162-数码管字符显示163-独立按键164-矩阵键盘165-矩阵键盘(LCD)166-用DS1302与12864LCD设计的可调式中文电子日历167-定时器的使用(方式1)168-12864LCD图形滚动演示169-用PG12864LCD设计的指针式电子钟17-1个共阳数码管显示变化数字170-定时器的使用(方式2)171-外部中断的使用172-定时器和外部中断173-开关控制12864LCD串行模式显示174-点阵显示175-液晶1602显示176-12864带字库测试程序177-串行12864显示178-遥控键值解码-12864LCD显示179-液晶12864并行18-单个数码管模拟水流180-液晶12864并行2181-串口发送试验182-串口接收试验183-串口接收（1602）184-蜂鸣器发声185-直流电机调速186-蜂鸣器间断发声187-lcd-12864应用188-继电器控制189-直流电机调速19-按键控制单个数码管显示190-步进电机191-存储AT24C02192-PCF8591T AD实验193-PCF8591T芯片DA实验194-温度采集DS18B20195-EEPROM_24C02196-12864LCD显示24C08保存的开机画面197-红外解码198-12864LCD显示EPROM2764保存的开机画面199-时钟DS1302(LCD)2-IO输出-点亮1个LED灯方法220-单个数码管指示逻辑电平200-宏晶看门狗201-SD卡202-秒表203-普通定时器时钟204-彩屏控制205-彩屏图片显示206-12864+DS1302时钟+18B20温度计207-12864测试程序208-12864串行驱动演示209-12864生产厂程序21-8位数码管显示其中之一210-12864中文显示测试211-LCD12864212-12864M液晶显示(有字库)程序（汇编）213-超声波测距LCD1286
上传时间： 2021-11-17
上传用户：
AC220V转DC(12V15W )电源板AD设计硬件原理图+PCB文件，2层板设计，大小为100*55mm, ALTIUM设计的原理图+PCB文件，可以做为你的学习设计参考。主要器件型号如下：Library Component Count : 24Name Description----------------------------------------------------------------------------------------------------2N3904 NPN General Purpose Amplifier2N3906 PNP General Purpose AmplifierBRIDGE1 Diode BridgeCON2 ConnectorCap CapacitorCap Pol1 Polarized Capacitor (Radial)D Zener Zener DiodeDIODE Diode 1N914 High Conductance Fast DiodeECELECTRO2 Electrolytic CapacitorFP103 FUSE-HHeader 2 Header, 2-PinINDUCTOR2 NMOS-2 N-Channel Power MOSFETPC837 OptoisolatorRES2-B Res Varistor Varistor (Voltage-Sensitive Resistor)T TR-2B TRANS1UCC28051 Volt Reg Voltage Regulator
上传时间： 2021-11-21
上传用户：kent
常用芯片DIP SOT SOIC QFP电阻电容二极管等3D模型库 3D视图封装库 STEP后缀三维视图（154个）:050-9.STEP0805R.STEP1001-1.STEP1001-2.STEP1001-3.STEP1001-4.STEP1001-5.STEP1001-6.STEP1001-7.STEP1001-8.STEP103_1KV.STEP10X5JT.STEP1206R.STEP13PX2.STEP15PX2.STEP20P插针.STEP25V1000UF.STEP3296W.STEP35V2200UF.STEP3mmLED.STEP3mmLEDH.STEP3X3可调电阻.STEP400V0.1UF.STEP455.STEP630V0.1UF.STEP7805.STEP8P4R.STEPAXIAL-0.2-0.125W.STEPAXIAL-0.4-0.25W.STEPaxial-0.6-2W.STEPB-3528.STEPC-0805.STEPC06x18.STEPCAP-6032.STEPCH3.96 X2.STEPCH3.96-3P.STEPD-PAK.STEPDB25.STEPDC-30.STEPDIP14.STEPDIP16.STEPDIP6.STEPDIP8.STEPDO-214AA.STEPDO-214AB.STEPDO-214AC.STEPDO-41.STEPDO-41Z.STEPFMQ.STEPGNR14D.STEPH9700.STEPILI4981.STEPIN4007.STEPIN5408.STEPJP051-6P6C_02.STEPJQC-3F.STEPJS-1132-10.STEPJS-1132-11.STEPJS-1132-12.STEPJS-1132-13.STEPJS-1132-14.STEPJS-1132-15.STEPJS-1132-2.STEPJS-1132-3.STEPJS-1132-4.STEPJS-1132-5.STEPJS-1132-6.STEPJS-1132-7.STEPJS-1132-8.STEPJS-1132-9.STEPJS-1132R-2.STEPJS-1132R-3.STEPJS-1132R-4.STEPJS-1132R-5.STEPJS-1132R-6.STEPJS-1132R-7.STEPJS-1132R-8.STEPJZC-33F.STEPKBP210.STEPKE2108.STEPKF2510 X8.STEPKF301.STEPKF301x3.STEPKSD-9700.STEPLED5_BLUE.STEPLED5_GRE.STEPLED5_RED.STEPLED5_YEL.STEPLFCSP_WQ.STEPLQFP100.STEPLQFP48.STEPMC-146.STEPmolex-22-27-2021.STEPmolex-22-27-2031.STEPmolex-22-27-2041.STEPmolex-22-27-2051.STEPmolex-22-27-2061.STEPmolex-22-27-2071.STEPmolex-22-27-2081.STEPMSOP10.STEPMSOP8.STEPPA0630NOXOX-HA1.STEPPIN10.STEPPIN24.STEPPIN24A.STEPR 0805.STEPR0402.STEPR0603.STEPR0805.STEPR1206.STEPRA-15.STEPRA-20.STEPRS808.STEPSIP-3-3.96 22-27-2031.STEPSL-B.STEPSL-D.STEPSL-E.STEPSL-G.STEPSL-H.STEPSOD-123.STEPSOD-323.STEPSOD-523.STEPSOD-723.STEPSOD-80.STEPSOIC-8.STEPSOP-4.STEPSOP14.STEPSOP16.STEPSOP18.STEPSOT-89.STEPSOT223.STEPSOT23-3.STEPSOT23-5.STEPSSOP28.STEPTAJ-A.STEPTAJ-B.STEPTAJ-C.STEPTAJ-D.STEPTAJ-E.STEPTAJ-R.STEPTHB6064H.STEPTO-126.STEPTO-126X.STEPTO-220.STEPTO-247.STEPTO-252-3L.STEPTOSHIBA_11-4C1.STEPTSSOP-8.STEPTSSOP14-BOTTON.STEPTSSOP14.STEPTSSOP28.STEPUSB-A.STEPUSB-B.STEPWT.STEP
标签： 芯片 dip sot soic qfp 电阻 电容 二极管 封装
上传时间： 2021-11-21
上传用户：XuVshu
该文档为A、B、AB、D类音频功率放大器简介文档，是一份很不错的参考资料，具有较高参考价值，感兴趣的可以下载看看………………
上传时间： 2021-11-28
上传用户：qdxqdxqdxqdx
序号 题号 题目名称 组别1 A 微电网模拟系统 本科2 B 滚球控制系统 本科3 C 四旋翼自主飞行器探测跟踪系统 本科4 E 自适应滤波器 本科5 F 调幅信号处理实验电路 本科6 H 远程幅频特性测试装置 本科7 I 可见光室内定位装置 本科8 K 单相用电器分析监测装置 本科9 L 自动泊车系统 高职高专10 M 管道内钢珠运动测量装置 高职高专11 O 直流电动机测速装置 高职高专12 P 简易水情检测系统 高职高专
标签： 全国大学生电子设计竞赛
上传时间： 2021-12-11
上传用户：wangshoupeng199
产品型号：VK2C21A/B/C/D 产品品牌：VINKA/永嘉微/永嘉微电 封装形式：SOP28/24/20/16 裸片:DICE（邦定COB）/COG（邦定玻璃用） 产品年份：新年份 联 系 人：许硕 原厂直销，工程服务，技术支持，价格最具优势！QT374 VK2C21A/B/C/D概述： VK2C21是一个点阵式存储映射的LCD驱动器，可支持最大80点（20SEGx4COM）或者最大128点（16SEGx8COM）的LCD屏。单片机可通过I2C接口配置显示参数和读写显示数据，也可通过指令进入省电模式。其高抗干扰，低功耗的特性适用于水电气表以及工控仪表类产品。 特点： ★ 工作电压 2.4-5.5V ★ 内置32 kHz RC振荡器 ★ 偏置电压（BIAS）可配置为1/3、1/4 ★ COM周期（DUTY）可配置为1/4、1/8 ★ 内置显示RAM为20x4位、16x8位 ★ 帧频可配置为80Hz、160Hz ★ 省电模式（通过关显示和关振荡器进入）
标签： LCD VK2C 抗干扰 21 高稳定 显示驱动 驱动 芯片
上传时间： 2022-04-08
上传用户：2937735731
