几种基于单片机的数字频率测量仪的设计
上传时间: 2013-11-12
上传用户:klin3139
文中所设计的基于AVR单片机的轮胎模具内径测量系统,采用光栅尺和激光测距仪测量模具内径,单片机通过接收上位机的命令控制步进电机改变测量点,同时控制光栅尺数显表进行数据采集实时返回给上位机。上位机将光栅尺数据和激光测距仪数据进行运算后得到模具的内径,测量精度在4 μm以内。
上传时间: 2013-11-19
上传用户:tianyi223
本设计主要用AT89C51作为控制核心,由霍尔传感器、LED数码显像管、HIN232CPE电平转换、及RS232构成。详细介绍了单片机的测量转速系统及PC机与单片机之间的串行通讯。充分发挥了单片机的性能。本文重点是测量速度并显示在5位LED数码管上。 其优点硬件是电路简单,软件功能完善,测量速度快、精度高、控制系统可靠,性价比较高等特点。
上传时间: 2013-10-10
上传用户:tianyi223
DS18B20温度测量、报警系统的设计
上传时间: 2014-12-26
上传用户:开怀常笑
DS18B20温度测量、报警系统的设计
上传时间: 2014-12-26
上传用户:ZJX5201314
提出了用“过采样”技术使在有用的测量频带内的信噪比得到改善, 从而提高ADC 测量的分辨率。并利用Matlab 对其结论进行仿真, 且在TMS320L F2407 DSP 上予以实现,结果表明信噪比和测量分辨率明显提高。
上传时间: 2013-11-20
上传用户:fairy0212
18B20温度测量
上传时间: 2013-10-19
上传用户:guanhuihong
为提高电容测量精度,针对电容式传感器的工作原理设计了基于PIC16LF874单片机电容测量模块。简单阐述了电容测量电路的应用背景和国内外研究现状,介绍了美国Microchip公司PIC16LF874单片机的特性。电容式传感器输出的动态微弱电容信号通过PS021型电容数字转换器把模拟量数据转换成数字量数据,所测数据由PIC16LF874单片机应用程序进行处理、显示和保存。实验结果表明,固定电容标称值为10~20 pF 的测量值相对误差在1%以内,同时也可知被测电容容值越大,测量值和标称值相对误差越小。 Abstract: To improve the accuracy of capacitance measurement,aimed at the principle of work of mercury capacitance acceleration transducer,the design of micro capacitance measurement circuit is based on the key PIC16LF874 chip. Briefly discusses the application of the capacitance measuring circuit for the background and status of foreign researchers,focusing on the United States PIC16LF874 microcontroller features. Capacitive sensor outputed signal through the dynamics of weak PS021-chip capacitors (capacitancedigital converter) to convert analog data into digital data,the measured data from the PIC16LF874 microcontroller application process, display and preservation. Experimental results show that the fixed capacitor 10pF ~ 20pF nominal value of the measured value of relative error is within 1%,but also it canbe seen the value of the measured capacitance larger,measuring value and the nominal value of relative error smaller.
上传时间: 2013-10-29
上传用户:wojiaohs
设计一种基于P89V51RD2的功率因数测量仪,采用光电隔离器和专用数码管驱动器。该测量仪是以增强型单片机P89V51RD2为核心,大大简化系统硬件设计。而软件部分采用模块化设计思想,采用中值滤波和小数补偿算法,实现功率因数的高精度测量。实验测试表明,该功率因数测量仪测量精度高,运行稳定可靠。 Abstract: A power-factor measurement instrument based on P89V51RD2is designed,which uses optical coupler and specific LED drive chip.The power factor measurement instrument uses P89V51RD2as a core of which greatly simplifies the system design.Furthermore,modularization software is developed in detail.The high precision power-factor measuring system is realized by the center value filter and fractional compensation algorithm.Experiments manifests that the power- factor measurement instrument is high precision,steady and reliable.
上传时间: 2014-12-27
上传用户:CHINA526
介绍了一种基于C8051F020单片机的多路压力测量仪。该测量仪选用电阻应变式压力传感器采集压力信号,并经放大电路处理后送入C8051F020单片机,再由C8051F020单片机内部的A/D转换器将采集到的压力信号进行模数转化,然后分别对数据进行存储和显示。该测量仪能测量6路压力信号,并且各测量点都能单独检测和设置。由于采用了C8051F020单片机,简化了硬件电路,增强了抗干扰能力,使得测量仪具有测量精度高,冲击小等特点。 Abstract: A measurement apparatus for multi-channel pressure based on single chip microcomputer is introduced.It can measure 6 channels signal of the pressure,and the pressure measure points can be detection and located individually.The pressure signal sampling is obtained by resistor stress-type pressure sensors,the digital signals of 6 channels are collected through amplifying and adjustment circuit of pressure signals and internal integrated A/D converter of MCU.Finally,and it realizes the function to store and display data separately.C8051F020 was used to made hardware circuit simple,and it also enhanced the anti-interference ability.It features high precision and little impact.
上传时间: 2013-11-16
上传用户:yare