针对目前燃气灶市场的状况，提出一种基于PIC16C711单片机的燃气灶脉冲点火控制器设计,具体包括有系统的组成和功能介绍、硬件电路设计及软件功能实现。 Abstract: Aiming at today’s gas cooker market, a pulse ignition controler design based on PIC16C711 is presented.The specific descriptions of system components and functions,hardware circuit design and software function are given.
上传时间： 2013-10-31
上传用户：zhqzal1014
MMC/SD卡以其优越的性能，在单片机嵌入式设备中得到广泛应用。将MMC/SD卡作为外部掉电存储介质应用于音频信号发生器中，通过8051F330单片机上的SPI接口，实现单片机—MMC/SD卡的存储扩展，设计了此硬件平台上的MMC/SD卡的单片机驱动程序，并给出了相应的程序代码，满足音频信号发生器的大容量存储要求。 Abstract: MMC/SD card is more and more widely used in the single chip embedded devices for their excellent performances.This article introduces the application of MMC/SD card as the external power down storage medium in audio signal generator. The extension technology especially for storage of single chip-MMC/SD card via SPI interfaces in 8051F330 single chip, including designs single chip drive program of MMC/SD card based on hardware platform,and also gives the key coding of the program. The implementation of big capacity storage is meaningful in audio signal generator.
上传时间： 2014-12-27
上传用户：黄华强
!方波信号是数字电路中非常重要的信号源!其产生方法有很多途径"本设计是基于MPLAB平台通过对方波信号发生器的电路分析!介绍了方波信号的产生原理和软件实现过程!并利用’:.单片机的定时器#计数器技术对PIC16F877A进行编程$通过对TMRO模块进行设置!使其分频比改变!产生V种不同频率的方波信号!同时改变初始值!产生任意频率的方波信号"
上传时间： 2013-10-23
上传用户：c12228
采用基于Cortex-M3核的微控制器STM32F103CBT6设计了脉冲变极性弧焊控制系统。该系统利用片内的高级定时器实现了快速脉冲切换,以及脉冲频率、起始时间、占空比的大范围调节;利用定时器间的协同工作,完成了光谱触发信号的精确延时。同时实现了运行过程中对系统电压的测量、监控、传输以及参数输入、显示、存储等功能,并简述了软件开发方法。
上传时间： 2013-10-20
上传用户：苍山观海
介绍一种基于单片机89C51组成的高压静电发生器的原理结构与设计，以及HD7279A接口芯片、频压转换、光电隔离电路、高压倍压整流电路在设计中的应用和系统软件控制流程。
上传时间： 2013-10-27
上传用户：逗逗666
在超声技术日益发展的今天，一个高质量的超声信号源成为各种超声产品的主动力。传统模拟超声信号源的智能化控制尚不完善,只能直接产生适当频率的电信号，用以驱动特定的超声波换能器。这对于信号源的合理利用是一个较大的弊端。本文介绍了一种采用单片机与复杂可编程逻辑器件(CPLD)相结合的方法设计的新型任意波形发生器(AWG)。其中波形合成采用了直接数字合成(DDS)技术。本系统能输出频率和幅度可调的多种标准函数波以及任意波形。信号频率范围覆盖超低频和高频，同时极大地提高了频率的分辨率和准确度，因此可以用它代替常用的模拟超声信号源。本系统采用单片机（AT89S52）对整机的输入、输出过程和波形数据采集进行控制。高速的CPLD（EPM7128S）将波形数据从存储器（AT28C256）中读出并送给波形生成DAC（AD7524）进行转换，形成所要的波形。并通过改变幅度控制DAC（DAC0832）的输入值来调节输出波形的峰值。用户通过面板上的矩阵键盘和1602液晶模块进行人机交互。串行E2PROM（AT24C02）实现了波形数据掉电保存功能。任意波形数据既可由输入的模拟信号经A/D转换后获得，也可采用具备RS-232接口的手写板直接输入。
上传时间： 2013-11-25
上传用户：wvbxj
本文介绍了直接数字合成(DDS)技术以及C8051F020微控制器,阐明了采用AD9859实现扫频信号发生器的原理,具体描述了C8051F020微控制器与AD9859之间的硬件接口电路以及相应的软件设计方法,设计了一个5阶低通椭圆滤波器,使输出的正弦波更加稳定、平滑。本设计能够产生良好的扫频信号,并且C8051F020和AD9859的优越性能大大提高了扫频速度,是一种良好的数字化设计。
上传时间： 2013-11-07
上传用户：asdstation
摘要：超低频信号发生器是科研、教学、制造业中一种最常用的通用仪器，输出波形一般固定为正弦波、三角波、锯齿波和方波，不能实现有时在实验和工程应用中需要的特殊信号或自定义信号。而要实现这一要求，不是做成硬件式的专用信号发生器，就是用计算机系统来完成，前者仍然不灵活，后者费用太高。然而应用单片机技术，通过软件与硬件的有机结合由硬件电路搭成一个环境平台，再由软件程序把要求的“任意函数信号”数据表嵌入在单片机程序存储器内，通过软件程序更改输出波形数据表，即可方便实现输出任意函数信号，而无需变动硬件电路。本原理样机使用单片机AT89C51，对其进行一次固化，可以安排四种任意波形，频率范围为0.001～800Hz，幅值范围为0～±10V。本文中对原理样机的软硬件系统的性能和误差进行了定量分析，并设计了一套使用Intel公司的新一代16位单片机80296SA对该样机进行了性能提升的新型样机方案，然后对新型样机方案进行了原理分析和性能分析，并给出了误差的定量计算，表明此方案不但可使样机的原理频率范围提高至1500Hz，输出幅值不变，输出分辨率提高至212，使波形质量大为改善。希望这种性价比较高的函数信号发生器对科研、教学、制造业有所帮助。关键词：单片机应用 MCS51 MCS296 超低频信号发生器
上传时间： 2013-11-20
上传用户：7891
摘要:反应堆仪表和控制系统(I&C)的数字化发展方向成为趋势,反应堆堆外核测量系统的数字化势在必行。传统脉冲周期监测装置通常采用模拟电路设计,但是,周期测量稳定性较差,统计涨落带来的测量误差较大。本项目研制数字脉冲周期监测装置能克服以上缺陷。本文简单介绍了单片机在数字脉冲周期监测装置中的应用,并简要分析了使用80C196KC单片机的原因和在脉冲周期监测装置中单片机完成的功能和功能实现方法。关键词:脉冲周期监测;80C196KC;C语言;最小二乘拟合法
上传时间： 2013-11-10
上传用户：saharawalker
I/O 型单片机使用手册 目录 间接寻址寄存器 – IAR, IAR0, IAR1 .............................................35间接寻址指针 – MP, MP0, MP1 ......................................................35存储区指针 – BP .........................................................................36累加器 – ACC...................................................................................37程序计数器低字节寄存器 – PCL....................................................37表格寄存器 – TBLP,TBHP,TBLH....................................................37看门狗定时寄存器 – WDTS............................................................38状态寄存器 – STATUS.....................................................................38中断控制寄存器 – INTC,INTC0,INTC1 .........................................39定时/计数寄存器...............................................................................39输入/输出端口和控制寄存器...........................................................40UART 寄存器 .USR,UCR1,UCR2,TXR/RXR,BRG.......................40输入/输出端口..........................................................................................41上拉电阻............................................................................................41PA 口的唤醒......................................................................................41输入/输出端口控制寄存器...............................................................41引脚共享功能....................................................................................42编程注意事项....................................................................................45定时/计数器..............................................................................................46配置定时/计数器输入时钟源...........................................................47定时/计数寄存器 – TMR, TMR0,TMR0L/TMR0H,TMR1L/TMR1H,TMR2.....................................................................49定时/计数控制寄存器 – TMRC,TMR0C,TMR1C,TMR2C............50定时器模式........................................................................................53事件计数器模式................................................................................53脉冲宽度测量模式............................................................................54可编程分频器(PFD)和蜂鸣器的应用..............................................55预分频器(Prescaler)...........................................................................56输入/输出接口...................................................................................56编程注意事项....................................................................................57定时/计数器应用范例.......................................................................57中断............................................................................................................59中断寄存器........................................................................................59中断优先权........................................................................................62外部中断............................................................................................63定时/计数器中断...............................................................................64UART 中断........................................................................................64编程注意事项....................................................................................65复位和初始化............................................................................................66复位....................................................................................................66目录iii异步串行口——UART............................................................................74UART 特性..........................................................................................74UART 外部引脚..................................................................................74数据发送.............................................................................................75UART 状态控制寄存器......................................................................75波特率发生器.....................................................................................79UART 设置与控制..............................................................................81UART 发送器......................................................................................83UART 接收器......................................................................................84接收错误处理.....................................................................................85接收中断图解.....................................................................................86地址检测模式.....................................................................................86暂停模式下的UART 功能.................................................................87UART 应用范例.................................................................................87振荡器........................................................................................................89系统时钟配置....................................................................................89系统晶体/陶瓷振荡器.......................................................................89系统电阻电容振荡器........................................................................90内部系统电阻电容振荡器................................................................90RTC 振荡器........................................................................................91看门狗定时振荡器............................................................................91暂停和唤醒................................................................................................92暂停.....................................................................................................92进入暂停.............................................................................................92静态电流.............................................................................................92唤醒....................................................................................................92看门狗定时器............................................................................................94掩膜选项....................................................................................................96应用电路....................................................................................................97第二部份 程序语言.....................................................................99第二章 指令集介绍.................................................................................101指令集......................................................................................................101指令周期..........................................................................................101数据的传送......................................................................................101算术运算..........................................................................................102逻辑和移位运算..............................................................................102分支和控制的转换..........................................................................102位运算..............................................................................................102查表运算..........................................................................................103其它运算..........................................................................................103指令设定一览表......................................................................................104惯例..................................................................................................104I/O 型单片机使用手册iv第三章 指令定义.....................................................................................107第四章 汇编语言和编译器.....................................................................121常用符号..................................................................................................121语句语法..................................................................................................122名称..................................................................................................122操作项..............................................................................................122操作数项..........................................................................................122注解..................................................................................................122编译伪指令..............................................................................................123条件编译伪指令..............................................................................123文件控制伪指令..............................................................................124程序伪指令......................................................................................126数据定义伪指令..............................................................................130宏指令..............................................................................................132汇编语言指令..........................................................................................136名称..................................................................................................136助记符..............................................................................................136操作数、运算子和表达式..............................................................136其它..........................................................................................................139前置引用..........................................................................................139局部标号..........................................................................................139汇编语言保留字..............................................................................140编译器选项..............................................................................................141编译列表文件格式..................................................................................141源程序列表......................................................................................141编译总结..........................................................................................142其它..................................................................................................142第三部份 开发工具................................................................... 145第五章 单片机开发工具.........................................................................147HT-IDE 集成开发环境............................................................................147盛群单片机仿真器(HT-ICE) ..................................................................149HT-ICE 接口卡.................................................................................149OTP 烧写器.....................................................................................149OTP 适配卡.....................................................................................149系统配置..................................................................................................150HT-ICE 接口卡设置........................................................................151安装..........................................................................................................153系统要求..........................................................................................153硬件安装..........................................................................................153软件安装..........................................................................................154目录v第六章 快速开始.....................................................................................159步骤一：建立一个新项目..............................................................159步骤二：将源程序文件加到项目中..............................................159步骤三：编译项目..........................................................................159步骤四：烧写OTP 单片机.............................................................160步骤五：传送程序与掩膜选项单至Holtek ..................................160附录............................................................................................... 161附录A 特性曲线图...................................................................................163附录B 封装信息.......................................................................................173
上传时间： 2013-10-18
上传用户：blacklee
