虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

手持激光测距仪

  • 自主移动机器人激光全局定位系统

    自主移动机器人激光全局定位系统

    标签: 移动机器人 激光 全局 定位系统

    上传时间: 2013-12-30

    上传用户:wpwpwlxwlx

  • 超声波测距数码管显示

    超声波模块测量距离,测距数码管显示

    标签: 超声波测距 数码管显示

    上传时间: 2013-11-02

    上传用户:qq1604324866

  • 超声波测距串口显示

    超声波模块,测量距离,最后测距串口显示

    标签: 超声波测距 串口显示

    上传时间: 2013-11-24

    上传用户:hongmo

  • 智能对线仪源代码

    智能对线仪源代码

    标签: 源代码

    上传时间: 2013-10-28

    上传用户:风之骄子

  • 一个超声波测距的制作

    一个较详细的超声波测距的制作过程

    标签: 超声波测距

    上传时间: 2013-11-02

    上传用户:叶夜alex

  • 基于TLC1549的阀门开度仪设计

    摘 要: 阀门开度仪以AT89C51单片机为核心, 通过在阀门电机轴上安装的电位计传感器获得阀 门电机轴的转动角位移, 从而得出阀门的开度, 达到自动检测的目的。详细介绍了串行控制的10 位A /D转换器TLC1549的特点和功能, 说明了TLC1549与AT89C51单片机在阀门开度仪中的硬件 电路和软件程序。实践证明, 该阀门开度仪数据采集准确可靠、工作稳定。 关键词: TLC1549; AT89C51单片机; 阀门开度    

    标签: 1549 TLC 阀门开度仪

    上传时间: 2013-10-14

    上传用户:行者Xin

  • 基于ARM单片机的自动测高测距小车

    生活中许多目标的高度和水平距离需要进行测量。目前主要的测量方法,仍以传统的皮尺丈量为主,测量效率不高,有时还很不方便,没有技术成熟的数字式测高测距产品。以基本的数学方法为理论依据,利用遥控小车做为载体,采用角度传感器测量角度、霍尔传感器测量水平距离等,通过单片机LM3S615进行数据计算,实现了对待测目标物体的高度、水平距离等数据的快速、精确和数字式的测量,高度测量精度可达99.06%,水平测量精度则可达98.06%。 Abstract:  In our lives, the height and horizontal distance of some goals are needed to be measured. Because the currently used methods are still traditional tape-based measuring methods, and the measuring efficiency is low and inconvenient so some kinds of digital and portable measuring methods or instruments are needed. Based on the basic math theory, this paper designed and manufactured a portable, digital and remote controlled measuring mobile small vehicle, which assembled with angle measuring sensor for angle measurement and Hall sensor for horizontal distance measuring. MCU LM3S615 calculated the height and horizontal distance data gotten from these sensors. The measuring process is simple, the measuring results are more accurate and the measuring efficiency is higher than traditional measure instruments. The accuracy of height and distance measurement can reach 99.06% and 98.06%.

    标签: ARM 单片机 自动

    上传时间: 2013-10-30

    上传用户:jackandlee

  • 基于P89V51RD2的功率因数测量仪设计

    设计一种基于P89V51RD2的功率因数测量仪,采用光电隔离器和专用数码管驱动器。该测量仪是以增强型单片机P89V51RD2为核心,大大简化系统硬件设计。而软件部分采用模块化设计思想,采用中值滤波和小数补偿算法,实现功率因数的高精度测量。实验测试表明,该功率因数测量仪测量精度高,运行稳定可靠。 Abstract:  A power-factor measurement instrument based on P89V51RD2is designed,which uses optical coupler and specific LED drive chip.The power factor measurement instrument uses P89V51RD2as a core of which greatly simplifies the system design.Furthermore,modularization software is developed in detail.The high precision power-factor measuring system is realized by the center value filter and fractional compensation algorithm.Experiments manifests that the power- factor measurement instrument is high precision,steady and reliable.

    标签: P89 89V V51 RD2

    上传时间: 2014-12-27

    上传用户:CHINA526

  • 基于AVR的新型防汽车追尾安全装置设计

    针对目前汽车追尾事件频发问题,提出一种防汽车车前和车后追尾的安全装置设计。该设计以高性能、低功耗的8位AVR微处理器ATmega8L为核心,结合霍尔式车速传感器、激光雷达测距装置和MMA7260QT加速度传感器,能够兼顾车前和车后,摒弃以往设计中只考虑车前或车后单一性缺点,尤其适用于高速、夜晚或新手行车。 Abstract:  Aiming at the high frequency of vehicle rear-end collision,a safe device design of anti-vehicle rear-end collision is presented.In the design,the high-performance,low-power8-bit AVR microprocessor ATmega8L is utilized as a core combined with Hall-type speed sensor,laser-radar ranging devices and the acceleration sensor MMA7260QT.The design considers both the front and back of a car,and overcomes the drawbacks of former designs in which only the front or the back of the car is considered,so it is especially suitable for high-speed,night or the beginner’s driving.

    标签: AVR 汽车追尾 装置

    上传时间: 2013-10-14

    上传用户:GavinNeko

  • 基于C8051F020单片机的多路压力测量仪

    介绍了一种基于C8051F020单片机的多路压力测量仪。该测量仪选用电阻应变式压力传感器采集压力信号,并经放大电路处理后送入C8051F020单片机,再由C8051F020单片机内部的A/D转换器将采集到的压力信号进行模数转化,然后分别对数据进行存储和显示。该测量仪能测量6路压力信号,并且各测量点都能单独检测和设置。由于采用了C8051F020单片机,简化了硬件电路,增强了抗干扰能力,使得测量仪具有测量精度高,冲击小等特点。 Abstract:  A measurement apparatus for multi-channel pressure based on single chip microcomputer is introduced.It can measure 6 channels signal of the pressure,and the pressure measure points can be detection and located individually.The pressure signal sampling is obtained by resistor stress-type pressure sensors,the digital signals of 6 channels are collected through amplifying and adjustment circuit of pressure signals and internal integrated A/D converter of MCU.Finally,and it realizes the function to store and display data separately.C8051F020 was used to made hardware circuit simple,and it also enhanced the anti-interference ability.It features high precision and little impact.

    标签: C8051F020 单片机 多路 压力

    上传时间: 2013-11-16

    上传用户:yare