三种16位整数运算器的ALU设计方法，调用库函数74181（4位ALU），组成串行16位运算器。(用74181的正逻辑) B．调用库函数74181和74182，组成提前进位16位运算器。(用74181的正逻辑) 注意：调74181库设计，加进位是“0”有效，减借位是“1”有效，所以最高位进位或借位标志寄存器要统一调整到高有效 C．用always @，case方式描述16位运算器。
上传时间： 2013-12-14
上传用户：aig85
除法器的设计本文所采用的除法原理是：对于八位无符号被除数A，先对A转换成高八位是0低八位是A的数C，在时钟脉冲的每个上升沿C 向左移动一位，最后一位补零，同时判断C的高八位是否大于除数B，如是则C的高八位减去B，同时进行移位操作，将C的第二位置1。否则，继续移位操作。经过八个周期后，所得到的C的高八位为余数，第八位为商。从图(1)可清楚地看出此除法器的工作原理。此除法器主要包括比较器、减法器、移位器、控制器等模块。
上传时间： 2017-07-20
上传用户：redmoons
/* * _168ZHONGDUAN2.c * * Created: 2014/11/2 15:12:45 * Author: lenovo */ #include <avr/io.h> #include <avr/iom168pa.h> #include <avr/interrupt.h> #include <util/delay.h> #include <avr/eeprom.h> //#include <util/delay_basic.h> //unsigned char const SEGtable[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x40}; #define BIT(x) (1<<(x)) #include<avr/signal.h> #include<avr/pgmspace.h> #include<util/delay.h> #include<avr/eeprom.h> #define setb(val,bitn) (val|=(1<<(bitn)))//设置某IO口某位为1 #define clr(val,bitn) (val&=~(1<<(bitn)))//设置某IO口某位为0 #define get(val,bitn) (val&(1<<(bitn)))//读取某位状态 //uchar ACT[8] ={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f}; #define CPL_BIT(x,y) (x^=(1<<y)) #define CLR_BIT(x,y) (x&=~(1<<y)) #define SET_1(a,b) a|=(1<<b) #define CLE_0(a,b) a&=~(1<<b) /*------宏定义------*/ #include <avr/wdt.h> #include <avr/sleep.h> #include <avr/interrupt.h> #include <avr/pgmspace.h> #include <util/delay.h> #include <avr/eeprom.h> #define setb(val,bitn) (val|=(1<<(bitn)))//设置某IO口某位为1 #define clr(val,bitn) (val&=~(1<<(bitn)))//设置某IO口某位为0 #define get(val,bitn) (val&(1<<(bitn)))//读取某位状态 #define uint8 unsigned char #define uint16 unsigned int #define P_LCDCS1 setb(PORTB,5) #define P_LCDCS0 clr(PORTB,5) #define P_LCDRST1 setb(PORTB,1) #define P_LCDRST0 clr(PORTB,1) #define P_LCDRS1 setb(PORTB,2) #define P_LCDRS0 clr(PORTB,2) #define P_LCDDAT1 setb(PORTB,4) #define P_LCDDAT0 clr(PORTB,4) #define P_LCDCLK1 setb(PORTB,3) #define P_LCDCLK0 clr(PORTB,3) //#define LCD_ //-----页地址定义----- #define Page1 0 #define Page2 1 #define Page3 2 #define Page4 3 #define Page5 4 #define Page6 5 #define Page7 6 #define Page8 7 //-----列地址定义-----每8列地址增1 #define List8_1 0 #define List8_2 7 #define List8_3 15 #define List8_4 23 #define List8_5 31 #define List8_6 39 #define List8_7 47 #define List8_8 55 #define List8_9 63 #define List8_10 71 #define List8_11 79 #define List8_12 87 #define List8_13 95 #define List8_14 103 #define List8_15 111 #define List8_16 119 //#define List8_17 127 //-----列地址定义-----每16列地址增1 #define List16_1 0 #define List16_2 15 #define List16_3 31 #define List16_4 47 #define List16_5 63 #define List16_6 79 #define List16_7 95 #define List16_8 111 //---------------------------------- #define STR_CHARG "Charge" //提示充电 #define STR_PRCE "%" //电量百分比 #define STR_ERR "Err" //出错显示 #define STR_OFF "OFF" //关机显示 //待机显示 #define STR_WAIT1 "Portable UPS" #define STR_WAIT2 "110V/60HZ" #define STR_WAIT3 "Select:DC OR AC" #define STR_WAIT4 "BATTERY:" //开机显示 #define STR_OUTSTATUS "Out Status:" #define STR_DCOUT12V "DC12V" #define STR_DCOUT5V "DC5V" #define STR_ACOUT "AC110V" //#define STR_MAOHAO ":" //====================================== extern uint8 LOCKA[2][16] ; //extern uint8 code BATS[10][16] ; extern uint8 BAT2S[12][32] ; extern uint8 NC[] ; extern uint8 mao_hao[] ; extern uint8 num1[] ; extern uint8 num2[] ; extern uint8 num3[] ; extern uint8 num4[] ; extern uint8 num5[] ; extern uint8 num6[] ; extern uint8 num7[] ; extern uint8 num8[] ; extern uint8 num9[] ; extern uint8 Tab_Ascii_8x16[95][16] ; extern uint8 Tab_Ascii_5x7[95][5] ; extern uint8 zhuang1[] ; extern uint8 tai1[] ; extern uint8 shi1[] ; extern uint8 yong1[] ; //---------------------------------- //extern void LcdWriteCommand(uint8 data1) ; extern void Display_Graphic_32x32(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_32x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_16x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_8x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_String_8x16(uint8 page,uint8 column,uint8 *text) ; extern void Display_Num_8x16(uint8 page,uint8 column,uint8 Num) ; extern void Display_Digital_8x16(uint8 page,uint8 column,uint8 *a) ; extern void Display_Nop_8x16(uint8 page,uint8 column,uint8 DatLong) ; extern void Display_String_5x7(uint8 page,uint8 column,uint8 *text) ; extern void Full_Display(void) ; extern void Clear_Screen(void) ; extern void Init_lcd12864(void) ; //#endif //========c12864.c============================================== /*************************************************** LCD:晶联讯电子 JLX12864G-086-PN(不带字库IC-UC1701X) 仅支持串行驱动方式 ***************************************************/ //#include "global.h" //#include "c12864.h" #define Tab_Ascii_8x16_CALL1 //粗体字形 #define Tab_Ascii_8x16_CALL2 //细体字形 #define Tab_Ascii_5x7_CALL #define Display_Graphic_32x32_CALL #define Display_Graphic_32x16_CALL #define Display_Graphic_16x16_CALL #define Display_Graphic_8x16_CALL #define Display_String_8x16_CALL //显示字符串 #define Display_Num_8x16_CALL //显示单个数据0-9 #define Display_Digital_8x16_CALL //显示数据0-9999 #define Display_Nop_8x16_CALL //填充8*16的空字符N个 #define Display_String_5x7_CALL #define Full_Display_CALL //============================================================================== uint8 aa[]={0,1,2,3,4,5,6,7,8,9}; uint8 LOCKA[2][16]={ //-- 童锁符号 -- //-- 此字体下对应的点阵为：宽x高=16x16 -- //0x00, 0x00, 0xc0, 0xe0, 0xf0, 0xd8, 0xcc, 0xc4, 0xc4, 0xcc, 0xd8, 0xf0, 0xe0, 0xc0, 0x00, 0x00, //0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xe0, 0xb0, 0x98, 0x8c, 0x8c, 0x8c, 0x8c, 0x98, 0xb0, 0xe0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00, } ; const PROGMEM uint8_t BATS[10][16]={ //-- 电池符号 -- //-- 此字体下对应的点阵为：宽x高=16x16 -- 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc8, 0xc8, 0xcc, 0xce, 0xce, 0xcc, 0xc8, 0xc8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xf8, 0xf8, 0xfc, 0xfe, 0xfe, 0xfc, 0xf8, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x00, }; const PROGMEM uint8_t BAT2S1[12][32]={ /*-- 电池符号 --*/ /*-- 此字体下对应的点阵为：宽x高=32x16 --*/ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x3f, 0x07, 0x03}, } ; const PROGMEM uint8_t BAT2S2[2][32]={ //-- 电池符号 不显示 -- //-- 此字体下对应的点阵为：宽x高=32x16 -- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, } ; uint8 NC[]={ /*-- 文字: 空符号 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, } ; uint8 mao_hao[]={ /*-- 文字: : (冒号） --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00}; uint8 num0[]={ /*-- 文字: 0 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00 }; uint8 num1[]={ /*-- 文字: 1 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00 }; uint8 num2[]={ /*-- 文字: 2 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00 //细体 //0x08,0x0C,0x84,0xC4,0x64,0x3C,0x18,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0C,0x00, // 粗体 }; uint8 num3[]={ /*-- 文字: 3 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00 }; uint8 num4[]={ /*-- 文字: 4 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00 }; uint8 num5[]={ /*-- 文字: 5 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00 }; uint8 num6[]={ /*-- 文字: 6 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00 }; uint8 num7[]={ /*-- 文字: 7 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00 }; uint8 num8[]={ /*-- 文字: 8 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00 }; uint8 num9[]={ /*-- 文字: 9 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00 }; //=======8x16======================================================================= #ifdef Display_String_8x16_CALL //Tab_Ascii_8x16_CALL const PROGMEM uint8_t Tab_Ascii_8x161[95][16]={ //粗体字形 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // - - 0x00,0x00,0x38,0xFC,0xFC,0x38,0x00,0x00,0x00,0x00,0x00,0x0D,0x0D,0x00,0x00,0x00, // -!- 0x00,0x0E,0x1E,0x00,0x00,0x1E,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -"- 0x20,0xF8,0xF8,0x20,0xF8,0xF8,0x20,0x00,0x02,0x0F,0x0F,0x02,0x0F,0x0F,0x02,0x00, // -#- 0x38,0x7C,0x44,0x47,0x47,0xCC,0x98,0x00,0x03,0x06,0x04,0x1C,0x1C,0x07,0x03,0x00, // -$- 0x30,0x30,0x00,0x80,0xC0,0x60,0x30,0x00,0x0C,0x06,0x03,0x01,0x00,0x0C,0x0C,0x00, // -%- 0x80,0xD8,0x7C,0xE4,0xBC,0xD8,0x40,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -&- 0x00,0x10,0x1E,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -'- 0x00,0x00,0xF0,0xF8,0x0C,0x04,0x00,0x00,0x00,0x00,0x03,0x07,0x0C,0x08,0x00,0x00, // -(- 0x00,0x00,0x04,0x0C,0xF8,0xF0,0x00,0x00,0x00,0x00,0x08,0x0C,0x07,0x03,0x00,0x00, // -)- 0x80,0xA0,0xE0,0xC0,0xC0,0xE0,0xA0,0x80,0x00,0x02,0x03,0x01,0x01,0x03,0x02,0x00, // -*- 0x00,0x80,0x80,0xE0,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x00, // -+- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x1E,0x0E,0x00,0x00,0x00, // -,- 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // --- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x00,0x00,0x00, // -.- 0x00,0x00,0x00,0x80,0xC0,0x60,0x30,0x00,0x0C,0x06,0x03,0x01,0x00,0x00,0x00,0x00, // -/- 0xF8,0xFC,0x04,0xC4,0x24,0xFC,0xF8,0x00,0x07,0x0F,0x09,0x08,0x08,0x0F,0x07,0x00, // -0- 0x00,0x10,0x18,0xFC,0xFC,0x00,0x00,0x00,0x00,0x08,0x08,0x0F,0x0F,0x08,0x08,0x00, // -1- 0x08,0x0C,0x84,0xC4,0x64,0x3C,0x18,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0C,0x00, // -2- 0x08,0x0C,0x44,0x44,0x44,0xFC,0xB8,0x00,0x04,0x0C,0x08,0x08,0x08,0x0F,0x07,0x00, // -3- 0xC0,0xE0,0xB0,0x98,0xFC,0xFC,0x80,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00, // -4- 0x7C,0x7C,0x44,0x44,0xC4,0xC4,0x84,0x00,0x04,0x0C,0x08,0x08,0x08,0x0F,0x07,0x00, // -5- 0xF0,0xF8,0x4C,0x44,0x44,0xC0,0x80,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -6- 0x0C,0x0C,0x04,0x84,0xC4,0x7C,0x3C,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00,0x00,0x00, // -7- 0xB8,0xFC,0x44,0x44,0x44,0xFC,0xB8,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -8- 0x38,0x7C,0x44,0x44,0x44,0xFC,0xF8,0x00,0x00,0x08,0x08,0x08,0x0C,0x07,0x03,0x00, // -9- 0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x06,0x00,0x00,0x00, // -:- 0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x08,0x0E,0x06,0x00,0x00,0x00, // -;- 0x00,0x80,0xC0,0x60,0x30,0x18,0x08,0x00,0x00,0x00,0x01,0x03,0x06,0x0C,0x08,0x00, // -<- 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00, // -=- 0x00,0x08,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x08,0x0C,0x06,0x03,0x01,0x00,0x00, // ->- 0x18,0x1C,0x04,0xC4,0xE4,0x3C,0x18,0x00,0x00,0x00,0x00,0x0D,0x0D,0x00,0x00,0x00, // -?- 0xF0,0xF8,0x08,0xC8,0xC8,0xF8,0xF0,0x00,0x07,0x0F,0x08,0x0B,0x0B,0x0B,0x01,0x00, // -@- 0xE0,0xF0,0x98,0x8C,0x98,0xF0,0xE0,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -A- 0x04,0xFC,0xFC,0x44,0x44,0xFC,0xB8,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0F,0x07,0x00, // -B- 0xF0,0xF8,0x0C,0x04,0x04,0x0C,0x18,0x00,0x03,0x07,0x0C,0x08,0x08,0x0C,0x06,0x00, // -C- 0x04,0xFC,0xFC,0x04,0x0C,0xF8,0xF0,0x00,0x08,0x0F,0x0F,0x08,0x0C,0x07,0x03,0x00, // -D- 0x04,0xFC,0xFC,0x44,0xE4,0x0C,0x1C,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0C,0x0E,0x00, // -E- 0x04,0xFC,0xFC,0x44,0xE4,0x0C,0x1C,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -F- 0xF0,0xF8,0x0C,0x84,0x84,0x8C,0x98,0x00,0x03,0x07,0x0C,0x08,0x08,0x07,0x0F,0x00, // -G- 0xFC,0xFC,0x40,0x40,0x40,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -H- 0x00,0x00,0x04,0xFC,0xFC,0x04,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -I- 0x00,0x00,0x00,0x04,0xFC,0xFC,0x04,0x00,0x07,0x0F,0x08,0x08,0x0F,0x07,0x00,0x00, // -J- 0x04,0xFC,0xFC,0xC0,0xF0,0x3C,0x0C,0x00,0x08,0x0F,0x0F,0x00,0x01,0x0F,0x0E,0x00, // -K- 0x04,0xFC,0xFC,0x04,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0C,0x0E,0x00, // -L- 0xFC,0xFC,0x38,0x70,0x38,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -M- 0xFC,0xFC,0x38,0x70,0xE0,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -N- 0xF0,0xF8,0x0C,0x04,0x0C,0xF8,0xF0,0x00,0x03,0x07,0x0C,0x08,0x0C,0x07,0x03,0x00, // -O- 0x04,0xFC,0xFC,0x44,0x44,0x7C,0x38,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -P- 0xF8,0xFC,0x04,0x04,0x04,0xFC,0xF8,0x00,0x07,0x0F,0x08,0x0E,0x3C,0x3F,0x27,0x00, // -Q- 0x04,0xFC,0xFC,0x44,0xC4,0xFC,0x38,0x00,0x08,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -R- 0x18,0x3C,0x64,0x44,0xC4,0x9C,0x18,0x00,0x06,0x0E,0x08,0x08,0x08,0x0F,0x07,0x00, // -S- 0x00,0x1C,0x0C,0xFC,0xFC,0x0C,0x1C,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -T- 0xFC,0xFC,0x00,0x00,0x00,0xFC,0xFC,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -U- 0xFC,0xFC,0x00,0x00,0x00,0xFC,0xFC,0x00,0x01,0x03,0x06,0x0C,0x06,0x03,0x01,0x00, // -V- 0xFC,0xFC,0x00,0x80,0x00,0xFC,0xFC,0x00,0x03,0x0F,0x0E,0x03,0x0E,0x0F,0x03,0x00, // -W- 0x0C,0x3C,0xF0,0xC0,0xF0,0x3C,0x0C,0x00,0x0C,0x0F,0x03,0x00,0x03,0x0F,0x0C,0x00, // -X- 0x00,0x3C,0x7C,0xC0,0xC0,0x7C,0x3C,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -Y- 0x1C,0x0C,0x84,0xC4,0x64,0x3C,0x1C,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0E,0x00, // -Z- 0x00,0x00,0xFC,0xFC,0x04,0x04,0x00,0x00,0x00,0x00,0x0F,0x0F,0x08,0x08,0x00,0x00, // -[- 0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x00, // -\- 0x00,0x00,0x04,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x08,0x08,0x0F,0x0F,0x00,0x00, // -]- 0x08,0x0C,0x06,0x03,0x06,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -^- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20, // -_- 0x00,0x00,0x03,0x07,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -`- 0x00,0xA0,0xA0,0xA0,0xE0,0xC0,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -a- 0x04,0xFC,0xFC,0x20,0x60,0xC0,0x80,0x00,0x08,0x0F,0x07,0x08,0x08,0x0F,0x07,0x00, // -b- 0xC0,0xE0,0x20,0x20,0x20,0x60,0x40,0x00,0x07,0x0F,0x08,0x08,0x08,0x0C,0x04,0x00, // -c- 0x80,0xC0,0x60,0x24,0xFC,0xFC,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -d- 0xC0,0xE0,0xA0,0xA0,0xA0,0xE0,0xC0,0x00,0x07,0x0F,0x08,0x08,0x08,0x0C,0x04,0x00, // -e- 0x40,0xF8,0xFC,0x44,0x0C,0x18,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -f- 0xC0,0xE0,0x20,0x20,0xC0,0xE0,0x20,0x00,0x27,0x6F,0x48,0x48,0x7F,0x3F,0x00,0x00, // -g- 0x04,0xFC,0xFC,0x40,0x20,0xE0,0xC0,0x00,0x08,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -h- 0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -i- 0x00,0x00,0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x30,0x70,0x40,0x40,0x7F,0x3F,0x00, // -j- 0x04,0xFC,0xFC,0x80,0xC0,0x60,0x20,0x00,0x08,0x0F,0x0F,0x01,0x03,0x0E,0x0C,0x00, // -k- 0x00,0x00,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -l- 0xE0,0xE0,0x60,0xC0,0x60,0xE0,0xC0,0x00,0x0F,0x0F,0x00,0x0F,0x00,0x0F,0x0F,0x00, // -m- 0x20,0xE0,0xC0,0x20,0x20,0xE0,0xC0,0x00,0x00,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -n- 0xC0,0xE0,0x20,0x20,0x20,0xE0,0xC0,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -o- 0x20,0xE0,0xC0,0x20,0x20,0xE0,0xC0,0x00,0x40,0x7F,0x7F,0x48,0x08,0x0F,0x07,0x00, // -p- 0xC0,0xE0,0x20,0x20,0xC0,0xE0,0x20,0x00,0x07,0x0F,0x08,0x48,0x7F,0x7F,0x40,0x00, // -q- 0x20,0xE0,0xC0,0x60,0x20,0x60,0xC0,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -r- 0x40,0xE0,0xA0,0x20,0x20,0x60,0x40,0x00,0x04,0x0C,0x09,0x09,0x0B,0x0E,0x04,0x00, // -s- 0x20,0x20,0xF8,0xFC,0x20,0x20,0x00,0x00,0x00,0x00,0x07,0x0F,0x08,0x0C,0x04,0x00, // -t- 0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -u- 0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x03,0x07,0x0C,0x0C,0x07,0x03,0x00, // -v- 0xE0,0xE0,0x00,0x00,0x00,0xE0,0xE0,0x00,0x07,0x0F,0x0C,0x07,0x0C,0x0F,0x07,0x00, // -w- 0x20,0x60,0xC0,0x80,0xC0,0x60,0x20,0x00,0x08,0x0C,0x07,0x03,0x07,0x0C,0x08,0x00, // -x- 0xE0,0xE0,0x00,0x00,0x00,0xE0,0xE0,0x00,0x47,0x4F,0x48,0x48,0x68,0x3F,0x1F,0x00, // -y- 0x60,0x60,0x20,0xA0,0xE0,0x60,0x20,0x00,0x0C,0x0E,0x0B,0x09,0x08,0x0C,0x0C,0x00, // -z- 0x00,0x40,0x40,0xF8,0xBC,0x04,0x04,0x00,0x00,0x00,0x00,0x07,0x0F,0x08,0x08,0x00, // -{- 0x00,0x00,0x00,0xBC,0xBC,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00,0x00, // -|- 0x00,0x04,0x04,0xBC,0xF8,0x40,0x40,0x00,0x00,0x08,0x08,0x0F,0x07,0x00,0x00,0x00, // -}- 0x08,0x0C,0x04,0x0C,0x08,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -~- } ; #endif //Tab_Ascii_8x16_CALL1 //=======8x16======================================================================= //#ifdef Tab_Ascii_8x16_CALL2 // #ifdef Display_Num_8x16_CALL const PROGMEM uint8_t Tab_Ascii_8x162[95][16]={ //细体字形 /*-- 文字: --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: ! --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00, /*-- 文字: " --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: # --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00, /*-- 文字: $ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00, /*-- 文字: % --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00, /*-- 文字: & --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10, /*-- 文字: ' --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: ( --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00, /*-- 文字: ) --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00, /*-- 文字: * --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00, /*-- 文字: + --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00, /*-- 文字: , --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00, /*-- 文字: - --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01, /*-- 文字: . --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00, /*-- 文字: / --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00, /*-- 文字: 0 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: 1 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: 2 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00, /*-- 文字: 3 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 4 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00, /*-- 文字: 5 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 6 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 7 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00, /*-- 文字: 8 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00, /*-- 文字: 9 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00, /*-- 文字: : --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00, /*-- 文字: ; --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00, /*-- 文字: < --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00, /*-- 文字: = --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00, /*-- 文字: > --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00, /*-- 文字: ? --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00, /*-- 文字: @ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00, /*-- 文字: A --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20, /*-- 文字: B --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: C --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00, /*-- 文字: D --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: E --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00, /*-- 文字: F --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00, /*-- 文字: G --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00, /*-- 文字: H --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20, /*-- 文字: I --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: J --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00, /*-- 文字: K --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00, /*-- 文字: L --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00, /*-- 文字: M --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00, /*-- 文字: N --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00, /*-- 文字: O --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: P --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00, /*-- 文字: Q --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00, /*-- 文字: R --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20, /*-- 文字: S --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00, /*-- 文字: T --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00, /*-- 文字: U --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00, /*-- 文字: V --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00, /*-- 文字: W --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00, /*-- 文字: X --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20, /*-- 文字: Y --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00, /*-- 文字: Z --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00, /*-- 文字: [ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00, /*-- 文字: \ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00, /*-- 文字: ] --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00, /*-- 文字: ^ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: _ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80, /*-- 文字: ` --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: a --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20, /*-- 文字: b --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: c --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00, /*-- 文字: d --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20, /*-- 文字: e --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00, /*-- 文字: f --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: g --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00, /*-- 文字: h --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20, /*-- 文字: i --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: j --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00, /*-- 文字: k --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00, /*-- 文字: l --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: m --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F, /*-- 文字: n --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20, /*-- 文字: o --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00, /*-- 文字: p --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: q --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80, /*-- 文字: r --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00, /*-- 文字: s --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00, /*-- 文字: t --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00, /*-- 文字: u --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20, /*-- 文字: v --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00, /*-- 文字: w --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00, /*-- 文字: x --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00, /*-- 文字: y --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00, /*-- 文字: z --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00, /*-- 文字: { --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40, /*-- 文字: | --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00, /*-- 文字: } --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00, /*-- 文字: ~ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; ///#endif //#endif //Tab_Ascii_8x16_CALL1 //=======5x7======================================================================= //#ifdef Tab_Ascii_5x7_CALL const PROGMEM uint8_t Tab_Ascii_5x71[95][5]={ /*全体ASCII 列表:5x7点阵*/ 0x00,0x00,0x00,0x00,0x00,//space 0x00,0x00,0x4f,0x00,0x00,//! 0x00,0x07,0x00,0x07,0x00,//" 0x14,0x7f,0x14,0x7f,0x14,//# 0x24,0x2a,0x7f,0x2a,0x12,//$ 0x23,0x13,0x08,0x64,0x62,//% 0x36,0x49,0x55,0x22,0x50,//& 0x00,0x05,0x07,0x00,0x00,//] 0x00,0x1c,0x22,0x41,0x00,//( 0x00,0x41,0x22,0x1c,0x00,//) 0x14,0x08,0x3e,0x08,0x14,//* 0x08,0x08,0x3e,0x08,0x08,//+ 0x00,0x50,0x30,0x00,0x00,//, 0x08,0x08,0x08,0x08,0x08,//- 0x00,0x60,0x60,0x00,0x00,//. 0x20,0x10,0x08,0x04,0x02,/// 0x3e,0x51,0x49,0x45,0x3e,//0 0x00,0x42,0x7f,0x40,0x00,//1 0x42,0x61,0x51,0x49,0x46,//2 0x21,0x41,0x45,0x4b,0x31,//3 0x18,0x14,0x12,0x7f,0x10,//4 0x27,0x45,0x45,0x45,0x39,//5 0x3c,0x4a,0x49,0x49,0x30,//6 0x01,0x71,0x09,0x05,0x03,//7 0x36,0x49,0x49,0x49,0x36,//8 0x06,0x49,0x49,0x29,0x1e,//9 0x00,0x36,0x36,0x00,0x00,//: 0x00,0x56,0x36,0x00,0x00,//; 0x08,0x14,0x22,0x41,0x00,//< 0x14,0x14,0x14,0x14,0x14,//= 0x00,0x41,0x22,0x14,0x08,//> 0x02,0x01,0x51,0x09,0x06,//? 0x32,0x49,0x79,0x41,0x3e,//@ 0x7e,0x11,0x11,0x11,0x7e,//A 0x7f,0x49,0x49,0x49,0x36,//B 0x3e,0x41,0x41,0x41,0x22,//C 0x7f,0x41,0x41,0x22,0x1c,//D 0x7f,0x49,0x49,0x49,0x41,//E 0x7f,0x09,0x09,0x09,0x01,//F 0x3e,0x41,0x49,0x49,0x7a,//G 0x7f,0x08,0x08,0x08,0x7f,//H 0x00,0x41,0x7f,0x41,0x00,//I 0x20,0x40,0x41,0x3f,0x01,//J 0x7f,0x08,0x14,0x22,0x41,//K 0x7f,0x40,0x40,0x40,0x40,//L 0x7f,0x02,0x0c,0x02,0x7f,//M 0x7f,0x04,0x08,0x10,0x7f,//N 0x3e,0x41,0x41,0x41,0x3e,//O 0x7f,0x09,0x09,0x09,0x06,//P 0x3e,0x41,0x51,0x21,0x5e,//Q 0x7f,0x09,0x19,0x29,0x46,//R 0x46,0x49,0x49,0x49,0x31,//S 0x01,0x01,0x7f,0x01,0x01,//T 0x3f,0x40,0x40,0x40,0x3f,//U 0x1f,0x20,0x40,0x20,0x1f,//V 0x3f,0x40,0x38,0x40,0x3f,//W 0x63,0x14,0x08,0x14,0x63,//X 0x07,0x08,0x70,0x08,0x07,//Y 0x61,0x51,0x49,0x45,0x43,//Z 0x00,0x7f,0x41,0x41,0x00,//[ 0x02,0x04,0x08,0x10,0x20,//\ 0x00,0x41,0x41,0x7f,0x00,//] 0x04,0x02,0x01,0x02,0x04,//^ 0x40,0x40,0x40,0x40,0x40,//_ 0x01,0x02,0x04,0x00,0x00,//` 0x20,0x54,0x54,0x54,0x78,//a 0x7f,0x48,0x48,0x48,0x30,//b 0x38,0x44,0x44,0x44,0x44,//c 0x30,0x48,0x48,0x48,0x7f,//d 0x38,0x54,0x54,0x54,0x58,//e 0x00,0x08,0x7e,0x09,0x02,//f 0x48,0x54,0x54,0x54,0x3c,//g 0x7f,0x08,0x08,0x08,0x70,//h 0x00,0x00,0x7a,0x00,0x00,//i 0x20,0x40,0x40,0x3d,0x00,//j 0x7f,0x20,0x28,0x44,0x00,//k 0x00,0x41,0x7f,0x40,0x00,//l 0x7c,0x04,0x38,0x04,0x7c,//m 0x7c,0x08,0x04,0x04,0x78,//n 0x38,0x44,0x44,0x44,0x38,//o 0x7c,0x14,0x14,0x14,0x08,//p 0x08,0x14,0x14,0x14,0x7c,//q 0x7c,0x08,0x04,0x04,0x08,//r 0x48,0x54,0x54,0x54,0x24,//s 0x04,0x04,0x3f,0x44,0x24,//t 0x3c,0x40,0x40,0x40,0x3c,//u 0x1c,0x20,0x40,0x20,0x1c,//v 0x3c,0x40,0x30,0x40,0x3c,//w 0x44,0x28,0x10,0x28,0x44,//x 0x04,0x48,0x30,0x08,0x04,//y 0x44,0x64,0x54,0x4c,0x44,//z 0x08,0x36,0x41,0x41,0x00,//{ 0x00,0x00,0x77,0x00,0x00,//| 0x00,0x41,0x41,0x36,0x08,//} 0x04,0x02,0x02,0x02,0x01,//~ }; //#endif //Tab_Ascii_5x7_CALL uint8 zhuang1[]={ /*-- 文字: 状 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x08,0x30,0x00,0xFF,0x20,0x20,0x20,0x20,0xFF,0x20,0xE1,0x26,0x2C,0x20,0x20,0x00, 0x04,0x02,0x01,0xFF,0x40,0x20,0x18,0x07,0x00,0x00,0x03,0x0C,0x30,0x60,0x20,0x00 }; uint8 tai1[]={ /*-- 文字: 态 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x00,0x04,0x04,0x04,0x84,0x44,0x34,0x4F,0x94,0x24,0x44,0x84,0x84,0x04,0x00,0x00, 0x00,0x60,0x39,0x01,0x00,0x3C,0x40,0x42,0x4C,0x40,0x40,0x70,0x04,0x09,0x31,0x00 }; uint8 shi1[]={ /*-- 文字: 使 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x40,0x20,0xF0,0x1C,0x07,0xF2,0x94,0x94,0x94,0xFF,0x94,0x94,0x94,0xF4,0x04,0x00, 0x00,0x00,0x7F,0x00,0x40,0x41,0x22,0x14,0x0C,0x13,0x10,0x30,0x20,0x61,0x20,0x00 }; uint8 yong1[]={ /*-- 文字: 用 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x00,0x00,0x00,0xFE,0x22,0x22,0x22,0x22,0xFE,0x22,0x22,0x22,0x22,0xFE,0x00,0x00, 0x80,0x40,0x30,0x0F,0x02,0x02,0x02,0x02,0xFF,0x02,0x02,0x42,0x82,0x7F,0x00,0x00 }; //x=9 y=16 点阵 0-9 const PROGMEM uint8_t lcd_numbers_lit[]={ 0x00,0xE0,0xE0,0x60,0x20,0x60,0xE0,0xE0,0x00,//0 0x00,0x7F,0x7F,0x60,0x40,0x60,0x7F,0x7F,0x00, 0x00,0x00,0x40,0x40,0xE0,0xE0,0x00,0x00,0x00,//1 0x00,0x00,0x00,0x00,0x7F,0x7F,0x00,0x00,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0xC0,0x00,//2 0x00,0x71,0x79,0x78,0x5E,0x47,0x43,0x41,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0xC0,0x00,//3 0x00,0x78,0x78,0x42,0x47,0x7F,0x7D,0x39,0x00, 0x00,0x00,0x00,0x80,0xE0,0xE0,0xE0,0x00,0x00,//4 0x00,0x0E,0x0F,0x0B,0x7F,0x7F,0x7F,0x08,0x00, 0x00,0xE0,0xE0,0xE0,0x20,0x20,0x20,0x20,0x00,//5 0x00,0x73,0x73,0x43,0x41,0x7F,0x7F,0x3E,0x00, 0x00,0xE0,0xE0,0x60,0x20,0x60,0x60,0x60,0x00,//6 0x00,0x7F,0x7F,0x43,0x43,0x7F,0x7E,0x3C,0x00, 0x00,0x20,0x20,0x20,0xA0,0xE0,0xE0,0x60,0x00,//7 0x00,0x00,0x40,0x78,0x7F,0x0F,0x01,0x00,0x00, 0x00,0xE0,0xE0,0x20,0x20,0x20,0xE0,0xE0,0x00,//8 0x00,0x7D,0x7D,0x47,0x42,0x47,0x7D,0x7D,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0x80,0x00,//9 0x00,0x67,0x6F,0x4C,0x6C,0x7F,0x3F,0x0F,0x00 }; //x=12 y=16 点阵 0-9数字 const PROGMEM uint8_t lcd_numbers[]={ 0x00,0xF0,0xFC,0xFC,0x0E,0x02,0x02,0x0E,0xFC,0xFC,0xF0,0x00,//0 0x00,0x07,0x3F,0x3F,0x70,0x40,0x40,0x70,0x3F,0x3F,0x07,0x00, 0x00,0x00,0x00,0x08,0x08,0xFC,0xFE,0xFE,0x00,0x00,0x00,0x00,//1 0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00, 0x00,0x38,0x3C,0x3E,0x06,0x02,0x86,0xFE,0xFC,0x78,0x00,0x00,//2 0x00,0x60,0x78,0x7C,0x5E,0x4F,0x43,0x41,0x40,0x40,0x00,0x00, 0x00,0x18,0x1C,0x1E,0x86,0x82,0xC6,0xFE,0x7C,0x38,0x00,0x00,//3 0x00,0x1C,0x3C,0x7C,0x60,0x40,0x61,0x7F,0x3F,0x1E,0x00,0x00, 0x00,0x00,0x80,0xC0,0xF0,0x3C,0xFE,0xFE,0xFE,0x00,0x00,0x00,//4 0x00,0x06,0x07,0x05,0x04,0x04,0x7F,0x7F,0x7F,0x04,0x04,0x00, 0x00,0x00,0xFE,0xFE,0xFE,0x62,0x62,0xE2,0xE2,0x82,0x00,0x00,//5 0x00,0x18,0x38,0x78,0x60,0x40,0x60,0x7F,0x3F,0x1F,0x00,0x00, 0x00,0xF0,0xFC,0xFC,0xCE,0x42,0xC6,0xCE,0x8E,0x0C,0x00,0x00,//6 0x00,0x0F,0x3F,0x7F,0x60,0x40,0x60,0x7F,0x3F,0x1F,0x00,0x00, 0x00,0x02,0x02,0x02,0x02,0x82,0xF2,0xFE,0x7E,0x0E,0x00,0x00,//7 0x00,0x00,0x00,0x60,0x7C,0x7F,0x1F,0x03,0x00,0x00,0x00,0x00, 0x00,0x38,0x7C,0x7E,0xC6,0x82,0x82,0xC6,0x7E,0x7C,0x38,0x00,//8 0x00,0x1E,0x3F,0x7F,0x61,0x40,0x40,0x61,0x7F,0x3F,0x1E,0x00, 0x00,0xF8,0xFC,0xFE,0x06,0x02,0x06,0xFE,0xFC,0xF0,0x00,0x00,//9 0x00,0x30,0x71,0x73,0x63,0x42,0x73,0x3F,0x1F,0x07,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//. 0x00,0x00,0x00,0x38,0x38,0x38,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,//- 0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00 }; const PROGMEM uint8_t Tab_Ascii_5x72[95][5]={ /*全体ASCII 列表:5x7点阵*/ 0x00,0x00,0x00,0x00,0x00,//space 0x00,0x00,0x4f,0x00,0x00,//! 0x00,0x07,0x00,0x07,0x00,//" 0x14,0x7f,0x14,0x7f,0x14,//# 0x24,0x2a,0x7f,0x2a,0x12,//$ 0x23,0x13,0x08,0x64,0x62,//% 0x36,0x49,0x55,0x22,0x50,//& 0x00,0x05,0x07,0x00,0x00,//] 0x00,0x1c,0x22,0x41,0x00,//( 0x00,0x41,0x22,0x1c,0x00,//) 0x14,0x08,0x3e,0x08,0x14,//* 0x08,0x08,0x3e,0x08,0x08,//+ 0x00,0x50,0x30,0x00,0x00,//, 0x08,0x08,0x08,0x08,0x08,//- 0x00,0x60,0x60,0x00,0x00,//. 0x20,0x10,0x08,0x04,0x02,/// 0x3e,0x51,0x49,0x45,0x3e,//0 0x00,0x42,0x7f,0x40,0x00,//1 0x42,0x61,0x51,0x49,0x46,//2 0x21,0x41,0x45,0x4b,0x31,//3 0x18,0x14,0x12,0x7f,0x10,//4 0x27,0x45,0x45,0x45,0x39,//5 0x3c,0x4a,0x49,0x49,0x30,//6 0x01,0x71,0x09,0x05,0x03,//7 0x36,0x49,0x49,0x49,0x36,//8 0x06,0x49,0x49,0x29,0x1e,//9 0x00,0x36,0x36,0x00,0x00,//: 0x00,0x56,0x36,0x00,0x00,//; 0x08,0x14,0x22,0x41,0x00,//< 0x14,0x14,0x14,0x14,0x14,//= 0x00,0x41,0x22,0x14,0x08,//> 0x02,0x01,0x51,0x09,0x06,//? 0x32,0x49,0x79,0x41,0x3e,//@ 0x7e,0x11,0x11,0x11,0x7e,//A 0x7f,0x49,0x49,0x49,0x36,//B 0x3e,0x41,0x41,0x41,0x22,//C 0x7f,0x41,0x41,0x22,0x1c,//D 0x7f,0x49,0x49,0x49,0x41,//E 0x7f,0x09,0x09,0x09,0x01,//F 0x3e,0x41,0x49,0x49,0x7a,//G 0x7f,0x08,0x08,0x08,0x7f,//H 0x00,0x41,0x7f,0x41,0x00,//I 0x20,0x40,0x41,0x3f,0x01,//J 0x7f,0x08,0x14,0x22,0x41,//K 0x7f,0x40,0x40,0x40,0x40,//L 0x7f,0x02,0x0c,0x02,0x7f,//M 0x7f,0x04,0x08,0x10,0x7f,//N 0x3e,0x41,0x41,0x41,0x3e,//O 0x7f,0x09,0x09,0x09,0x06,//P 0x3e,0x41,0x51,0x21,0x5e,//Q 0x7f,0x09,0x19,0x29,0x46,//R 0x46,0x49,0x49,0x49,0x31,//S 0x01,0x01,0x7f,0x01,0x01,//T 0x3f,0x40,0x40,0x40,0x3f,//U 0x1f,0x20,0x40,0x20,0x1f,//V 0x3f,0x40,0x38,0x40,0x3f,//W 0x63,0x14,0x08,0x14,0x63,//X 0x07,0x08,0x70,0x08,0x07,//Y 0x61,0x51,0x49,0x45,0x43,//Z 0x00,0x7f,0x41,0x41,0x00,//[ 0x02,0x04,0x08,0x10,0x20,// 0x00,0x41,0x41,0x7f,0x00,//] 0x04,0x02,0x01,0x02,0x04,//^ 0x40,0x40,0x40,0x40,0x40,//_ 0x01,0x02,0x04,0x00,0x00,//` 0x20,0x54,0x54,0x54,0x78,//a 0x7f,0x48,0x48,0x48,0x30,//b 0x38,0x44,0x44,0x44,0x44,//c 0x30,0x48,0x48,0x48,0x7f,//d 0x38,0x54,0x54,0x54,0x58,//e 0x00,0x08,0x7e,0x09,0x02,//f 0x48,0x54,0x54,0x54,0x3c,//g 0x7f,0x08,0x08,0x08,0x70,//h 0x00,0x00,0x7a,0x00,0x00,//i 0x20,0x40,0x40,0x3d,0x00,//j 0x7f,0x20,0x28,0x44,0x00,//k 0x00,0x41,0x7f,0x40,0x00,//l 0x7c,0x04,0x38,0x04,0x7c,//m 0x7c,0x08,0x04,0x04,0x78,//n 0x38,0x44,0x44,0x44,0x38,//o 0x7c,0x14,0x14,0x14,0x08,//p 0x08,0x14,0x14,0x14,0x7c,//q 0x7c,0x08,0x04,0x04,0x08,//r 0x48,0x54,0x54,0x54,0x24,//s 0x04,0x04,0x3f,0x44,0x24,//t 0x3c,0x40,0x40,0x40,0x3c,//u 0x1c,0x20,0x40,0x20,0x1c,//v 0x3c,0x40,0x30,0x40,0x3c,//w 0x44,0x28,0x10,0x28,0x44,//x 0x04,0x48,0x30,0x08,0x04,//y 0x44,0x64,0x54,0x4c,0x44,//z 0x08,0x36,0x41,0x41,0x00,//{ 0x00,0x00,0x77,0x00,0x00,//| 0x00,0x41,0x41,0x36,0x08,//} 0x04,0x02,0x02,0x02,0x01,//~ }; /////////////// #define Start_T1 TCCR1B|=_BV(CS11);TCNT1=0//复位预计分频器并开启定时器T1 #define Stop_T1 TCCR1B&=~_BV(CS11) //关闭定时器T1 //数码管的段码编码 unsigned char table[10] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; volatile unsigned char i,j,k; volatile unsigned char IRcode; //定义一个长度为4字节的无符号long类型变量来存储代码 volatile unsigned char IR_OK=0; //IR信号接收有效 当程序响应接收以后请马上清零 这样才会继续接收下一IR码 volatile unsigned char IR_con=0; //IR信号当前接收位 0时表示第0位即同步码(4.5ms高电平) volatile unsigned int Pulse_length=0; //捕获的脉冲宽度 volatile unsigned char ICP_Parity=0; //捕获中断奇偶次计数 1时为偶次 并在此时判断脉宽 volatile unsigned char address; volatile unsigned char code_data; volatile unsigned char code_data1; unsigned char clrbit; #define FREQ 8 //定义单片机工作频率为 4M /////////////// //**************************************************************** // 函数名称：DelayLcd // 函数功能：延时 // 入口参数： // 出口参数： //***************************************************************** void DelayLcd(uint16 i) { uint16 j; for(j=200;j>0;j--) for(;i>0;i--); //while(i--); } //**************************************************************** // 函数名称：LcdWriteCommand // 函数功能：写指令到LCD模块 // 入口参数：数据 // 出口参数： //***************************************************************** void LcdWriteCommand(uint8 data1) // { uint8 i ; P_LCDCS0 ; P_LCDRS0 ; for(i=8;i>0;i--) { P_LCDCLK0; if(data1&0x80) P_LCDDAT1; else P_LCDDAT0; P_LCDCLK1; data1 <<= 1; } } //**************************************************************** // 函数名称：LcdWritedata // 函数功能：写数据到LCD模块 // 入口参数：数据 // 出口参数： //***************************************************************** void LcdWritedata(uint8 data1) // { uint8 i; P_LCDCS0 ; P_LCDRS1 ; for(i=8;i>0;i--) { P_LCDCLK0; if(data1&0x80) P_LCDDAT1; else P_LCDDAT0; P_LCDCLK1; data1 <<= 1; } } //**************************************************************** // 函数名称：Lcd_SetAddr // 函数功能：设置LCD显示地址 // 入口参数： 页地址 列地址 // 出口参数： //***************************************************************** void Lcd_SetAddr(uint8 page,uint8 column) { //LcdWriteCommand(0xb0 | (y+yy)); //LcdWriteCommand(0x10 | (x>>4)); //LcdWriteCommand(0x00 | (x&0x0f)); //P_LCDCS0 ; LcdWriteCommand(0xb0|page); /*设置页地址*/ LcdWriteCommand((column>>4)|0x10); /*设置列地址的高4位*/ LcdWriteCommand(column&0x0f); /*设置列地址的低4位*/ } ////// void Display_Graphic_32x2(uint8 page,uint8 column,PROGMEM uint8_t *dp) // 电池显示 0、2、4、6、8、10 { uint8 i,j; uint8 page_address; uint8 column_address_L,column_address_H; page_address = 0xb0|page; column_address_L =(column&0x0f); column_address_H =(column>>4)|0x10; P_LCDCS0 ; for(j=0;j<2;j++) { LcdWriteCommand(page_address+j); /*设置页地址*/ LcdWriteCommand(column_address_H); /*设置列地址的高4位*/ LcdWriteCommand(column_address_L); /*设置列地址的低4位*/ for (i=32;i>0;i--) //写32行 { LcdWritedata(pgm_read_byte(dp++)); /*写数据到LCD,每写完一个8位的数据后列地址自动加1*/ } LcdWritedata(0x00); } P_LCDCS1 ; } //#ifdef Display_Graphic_32x32_CALL void Display_Graphic_32x32(uint8 page,uint8 column,PROGMEM uint8_t *dp) { uint8 i,j; uint8 page_address; uint8 column_address_L,column_address_H; page_address = 0xb0|page; column_address_L =(column&0x0f); column_address_H =(column>>4)|0x10; P_LCDCS0 ; &
标签： 程序
上传时间： 2016-03-03
上传用户：彦 yan
产品型号：VK1640B 产品品牌：VINTEK/元泰/VINKA 封装形式：SSOP24 产品年份：新年份 联 系 人：许先生 联 系 QQ：1918885898 联系手机：18898582398 主营LCD/LED液晶显示驱动IC，工程服务，技术支持，价格更具优势！ 概述 VK1640B 是一款 LED（发光二极管显示器）驱动控制专用电路，内部集成有 MCU 数字接口、数据锁存器、LED 高压驱动。本产品采用 CMOS 工艺，主要应用于小型 LED 显示屏驱动。 特性说明 功能特点 ● 采用 CMOS 工艺制作 ● 显示模式（8 段×12 位） ● 辉度调节电路（占空比 8 级可调） ● 两线串行接口 ● 振荡方式：内置 RC 振荡 ● 内置上电复位 ● 采用 SSOP24 封装 ★ 此篇产品叙述为功能简介，如需要完整产品PDF资料可以联系许先生Q：1918885898索取！ LCD/LED液晶控制器及驱动器系列 芯片简介如下： 内存映射的LED控制器及驱动器 VK1628 --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:70/52 共阴驱动:10段7位/13段4位 共阳驱动:7段10位 按键:10x2 封装SOP28 VK1629 --- 通讯接口:STB/CLK/DIN/DOUT 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:16段8位 共阳驱动:8段16位 按键:8x4 封装QFP44 VK1629A --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:16段8位 共阳驱动:8段16位 按键:--- 封装SOP32 VK1629B --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:112 共阴驱动:14段8位 共阳驱动:8段14位 按键:8x2 封装SOP32 VK1629C --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:120 共阴驱动:15段8位 共阳驱动:8段15位 按键:8x1 封装SOP32 VK1629D --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:96 共阴驱动:12段8位 共阳驱动:8段12位 按键:8x4 封装SOP32 VK1640 --- 通讯接口: CLK/DIN 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:8段16位 共阳驱动:16段8位 按键:--- 封装SOP28 VK1640B -- 通讯接口: CLK/DIN 电源电压:5V(4.5～5.5V) 驱动点阵:96 共阴驱动:8段12位 共阳驱动:12段8位【封装更小，性价更高】 封装SSOP24 VK1650 --- 通讯接口: SCL/SDA 电源电压:5V(3.0～5.5V) 驱动点阵:8x16 共阴驱动:8段4位 共阳驱动:4段8位 按键:7x4 封装SOP16/DIP16 VK1651 --- 通讯接口: SCL/SDA 电源电压:5V(3.0～5.5V) 驱动点阵:8x14 共阴驱动:7段4位 共阳驱动:4段7位 按键:7x4 封装SOP16/DIP16 VK1668 ---通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:70/52 共阴驱动:10段7位/13段4位 共阳驱动:7段10位 按键:10x2 封装SOP24 VK6932 --- 通讯接口:STB/CLK/DIN 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:8段16位17.5/140mA 共阳驱动:16段8位 按键:--- 封装SOP32 VK16K33 --- 通讯接口:SCL/SDA 电源电压:5V(4.5V～5.5V) 驱动点阵:128/96/64 共阴驱动:16段8位/12段8位/8段8位 共阳驱动:8段16位/8段12位/8段8位 按键:13x3 10x3 8x3 封装SOP20/SOP24/SOP28 (所有型号全部封装均有现货，欢迎加Q查询 191 888 5898 许生) RAM映射LCD控制器和驱动器系列 VK1024B 2.4V～5.2V 6seg*4com 6*3 6*2 偏置电压1/2 1/3 S0P-16 VK1056B 2.4V～5.2V 14seg*4com 14*3 14*2 偏置电压1/2 1/3 SOP-24/SSOP-24 VK1072B 2.4V～5.2V 18seg*4com 18*3 18*2 偏置电压1/2 1/3 SOP-28 VK1072C 2.4V～5.2V 18seg*4com 18*3 18*2 偏置电压1/2 1/3 SOP-28 VK1088B 2.4V～5.2V 22seg*4com 22*3 偏置电压1/2 1/3 QFN-32L（4MM*4MM） VK0192 2.4V～5.2V 24seg*8com 偏置电压1/4 LQFP-44 VK0256 2.4V～5.2V 32seg*8com 偏置电压1/4 QFP-64 VK0256B 2.4V～5.2V 32seg*8com 偏置电压1/4 LQFP-64 VK0256C 2.4V～5.2V 32seg*8com 偏置电压1/4 LQFP-52 VK1621S-1 2.4V～5.2V 32*4 32*3 32*2 偏置电压1/2 1/3 LQFP44/48/SSOP48/SKY28/DICE裸片 VK1622B 2.7V～5.5V 32seg*8com 偏置电压1/4 LQFP-48 VK1622S 2.7V～5.5V 32seg*8com 偏置电压1/4 LQFP44/48/52/64/QFP64/DICE裸片 VK1623S 2.4V～5.2V 48seg*8com 偏置电压1/4 LQFP-100/QFP-100/DICE裸片 VK1625 2.4V～5.2V 64seg*8com 偏置电压1/4 LQFP-100/QFP-100/DICE VK1626 2.4V～5.2V 48seg*16com 偏置电压1/5 LQFP-100/QFP-100/DICE (高品质 高性价比：液晶显示驱动IC 原厂直销 工程技术支持！) (所有型号全部封装均有现货，欢迎加Q查询 191 888 5898 许生) 高抗干扰LCD液晶控制器及驱动系列 VK2C21A 2.4～5.5V 20seg*4com 16*8 偏置电压1/3 1/4 I2C通讯接口 SOP-28 VK2C21B 2.4～5.5V 16seg*4com 12*8 偏置电压1/3 1/4 I2C通讯接口 SOP-24 VK2C21C 2.4～5.5V 12seg*4com 8*8 偏置电压1/3 1/4 I2C通讯接口 SOP-20 VK2C21D 2.4～5.5V 8seg*4com 4*8 偏置电压1/3 1/4 I2C通讯接口 NSOP-16 VK2C22A 2.4～5.5V 44seg*4com 偏置电压1/2 1/3 I2C通讯接口 LQFP-52 VK2C22B 2.4～5.5V 40seg*4com 偏置电压1/2 1/3 I2C通讯接口 LQFP-48 VK2C23A 2.4～5.5V 56seg*4com 52*8 偏置电压1/3 1/4 I2C通讯接口 LQFP-64 VK2C23B 2.4～5.5V 36seg*8com 偏置电压1/3 1/4 I2C通讯接口 LQFP-48 VK2C24 2.4～5.5V 72seg*4com 68*8 60*16 偏置电压1/3 1/4 1/5 I2C通讯接口 LQFP-80 超低功耗LCD液晶控制器及驱动系列 VKL060 2.5～5.5V 15seg*4com 偏置电压1/2 1/3 I2C通讯接口 SSOP-24 VKL128 2.5～5.5V 32seg*4com 偏置电压1/2 1/3 I2C通讯接口 LQFP-44 VKL144A 2.5～5.5V 36seg*4com 偏置电压1/2 1/3 I2C通讯接口 TSSOP-48 VKL144B 2.5～5.5V 36seg*4com 偏置电压1/2 1/3 I2C通讯接口 QFN48L (6MM*6MM) 静态显示LCD液晶控制器及驱动系列 VKS118 2.4～5.2V 118seg*2com 偏置电压 -- 4线通讯接口 LQFP-128 VKS232 2.4～5.2V 116seg*2com 偏置电压1/1 1/2 4线通讯接口 LQFP-128 以上介绍内容为IC参数简介，难免有错漏，且相关IC型号众多，未能一一收录。欢迎联系索取完整资料及样品！ 请加许先生 QQ：191 888 5898联系！谢谢 生意无论大小，做人首重诚信！本公司全体员工将既往开来，再接再厉。争取为各位带来更专业的技术支持，更优质的销售服务，更高性价比的好产品.竭诚希望能与各位客户朋友深入沟通，携手共进，共同成长，合作共赢！谢谢。 http://www.szvinka.com/
标签： 1640 1640B SSOP 6932 VK 24 TM 脚位 封装 体积
上传时间： 2018-11-24
上传用户：szqxw1688
产品型号：VK1640B 产品品牌：VINTEK/元泰/VINKA 封装形式：SSOP24 产品年份：新年份 联 系 人：许先生 联 系 QQ：1918885898 联系手机：18898582398 主营LCD/LED液晶显示驱动IC，工程服务，技术支持，价格更具优势！ 概述 VK1640B 是一款 LED（发光二极管显示器）驱动控制专用电路，内部集成有 MCU 数字接口、数据锁存器、LED 高压驱动。本产品采用 CMOS 工艺，主要应用于小型 LED 显示屏驱动。 特性说明 功能特点 ● 采用 CMOS 工艺制作 ● 显示模式（8 段×12 位） ● 辉度调节电路（占空比 8 级可调） ● 两线串行接口 ● 振荡方式：内置 RC 振荡 ● 内置上电复位 ● 采用 SSOP24 封装 ★ 此篇产品叙述为功能简介，如需要完整产品PDF资料可以联系许先生Q：1918885898索取！ LCD/LED液晶控制器及驱动器系列 芯片简介如下： 内存映射的LED控制器及驱动器 VK1628 --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:70/52 共阴驱动:10段7位/13段4位 共阳驱动:7段10位 按键:10x2 封装SOP28 VK1629 --- 通讯接口:STB/CLK/DIN/DOUT 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:16段8位 共阳驱动:8段16位 按键:8x4 封装QFP44 VK1629A --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:16段8位 共阳驱动:8段16位 按键:--- 封装SOP32 VK1629B --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:112 共阴驱动:14段8位 共阳驱动:8段14位 按键:8x2 封装SOP32 VK1629C --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:120 共阴驱动:15段8位 共阳驱动:8段15位 按键:8x1 封装SOP32 VK1629D --- 通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:96 共阴驱动:12段8位 共阳驱动:8段12位 按键:8x4 封装SOP32 VK1640 --- 通讯接口: CLK/DIN 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:8段16位 共阳驱动:16段8位 按键:--- 封装SOP28 VK1640B -- 通讯接口: CLK/DIN 电源电压:5V(4.5～5.5V) 驱动点阵:96 共阴驱动:8段12位 共阳驱动:12段8位【封装更小，性价更高】 封装SSOP24 VK1650 --- 通讯接口: SCL/SDA 电源电压:5V(3.0～5.5V) 驱动点阵:8x16 共阴驱动:8段4位 共阳驱动:4段8位 按键:7x4 封装SOP16/DIP16 VK1651 --- 通讯接口: SCL/SDA 电源电压:5V(3.0～5.5V) 驱动点阵:8x14 共阴驱动:7段4位 共阳驱动:4段7位 按键:7x4 封装SOP16/DIP16 VK1668 ---通讯接口:STB/CLK/DIO 电源电压:5V(4.5～5.5V) 驱动点阵:70/52 共阴驱动:10段7位/13段4位 共阳驱动:7段10位 按键:10x2 封装SOP24 VK6932 --- 通讯接口:STB/CLK/DIN 电源电压:5V(4.5～5.5V) 驱动点阵:128 共阴驱动:8段16位17.5/140mA 共阳驱动:16段8位 按键:--- 封装SOP32 VK16K33 --- 通讯接口:SCL/SDA 电源电压:5V(4.5V～5.5V) 驱动点阵:128/96/64 共阴驱动:16段8位/12段8位/8段8位 共阳驱动:8段16位/8段12位/8段8位 按键:13x3 10x3 8x3 封装SOP20/SOP24/SOP28 (所有型号全部封装均有现货，欢迎加Q查询 191 888 5898 许生) RAM映射LCD控制器和驱动器系列 VK1024B 2.4V～5.2V 6seg*4com 6*3 6*2 偏置电压1/2 1/3 S0P-16 VK1056B 2.4V～5.2V 14seg*4com 14*3 14*2 偏置电压1/2 1/3 SOP-24/SSOP-24 VK1072B 2.4V～5.2V 18seg*4com 18*3 18*2 偏置电压1/2 1/3 SOP-28 VK1072C 2.4V～5.2V 18seg*4com 18*3 18*2 偏置电压1/2 1/3 SOP-28 VK1088B 2.4V～5.2V 22seg*4com 22*3 偏置电压1/2 1/3 QFN-32L（4MM*4MM） VK0192 2.4V～5.2V 24seg*8com 偏置电压1/4 LQFP-44 VK0256 2.4V～5.2V 32seg*8com 偏置电压1/4 QFP-64 VK0256B 2.4V～5.2V 32seg*8com 偏置电压1/4 LQFP-64 VK0256C 2.4V～5.2V 32seg*8com 偏置电压1/4 LQFP-52 VK1621S-1 2.4V～5.2V 32*4 32*3 32*2 偏置电压1/2 1/3 LQFP44/48/SSOP48/SKY28/DICE裸片 VK1622B 2.7V～5.5V 32seg*8com 偏置电压1/4 LQFP-48 VK1622S 2.7V～5.5V 32seg*8com 偏置电压1/4 LQFP44/48/52/64/QFP64/DICE裸片 VK1623S 2.4V～5.2V 48seg*8com 偏置电压1/4 LQFP-100/QFP-100/DICE裸片 VK1625 2.4V～5.2V 64seg*8com 偏置电压1/4 LQFP-100/QFP-100/DICE VK1626 2.4V～5.2V 48seg*16com 偏置电压1/5 LQFP-100/QFP-100/DICE (高品质 高性价比：液晶显示驱动IC 原厂直销 工程技术支持！) (所有型号全部封装均有现货，欢迎加Q查询 191 888 5898 许生) 高抗干扰LCD液晶控制器及驱动系列 VK2C21A 2.4～5.5V 20seg*4com 16*8 偏置电压1/3 1/4 I2C通讯接口 SOP-28 VK2C21B 2.4～5.5V 16seg*4com 12*8 偏置电压1/3 1/4 I2C通讯接口 SOP-24 VK2C21C 2.4～5.5V 12seg*4com 8*8 偏置电压1/3 1/4 I2C通讯接口 SOP-20 VK2C21D 2.4～5.5V 8seg*4com 4*8 偏置电压1/3 1/4 I2C通讯接口 NSOP-16 VK2C22A 2.4～5.5V 44seg*4com 偏置电压1/2 1/3 I2C通讯接口 LQFP-52 VK2C22B 2.4～5.5V 40seg*4com 偏置电压1/2 1/3 I2C通讯接口 LQFP-48 VK2C23A 2.4～5.5V 56seg*4com 52*8 偏置电压1/3 1/4 I2C通讯接口 LQFP-64 VK2C23B 2.4～5.5V 36seg*8com 偏置电压1/3 1/4 I2C通讯接口 LQFP-48 VK2C24 2.4～5.5V 72seg*4com 68*8 60*16 偏置电压1/3 1/4 1/5 I2C通讯接口 LQFP-80 超低功耗LCD液晶控制器及驱动系列 VKL060 2.5～5.5V 15seg*4com 偏置电压1/2 1/3 I2C通讯接口 SSOP-24 VKL128 2.5～5.5V 32seg*4com 偏置电压1/2 1/3 I2C通讯接口 LQFP-44 VKL144A 2.5～5.5V 36seg*4com 偏置电压1/2 1/3 I2C通讯接口 TSSOP-48 VKL144B 2.5～5.5V 36seg*4com 偏置电压1/2 1/3 I2C通讯接口 QFN48L (6MM*6MM) 静态显示LCD液晶控制器及驱动系列 VKS118 2.4～5.2V 118seg*2com 偏置电压 -- 4线通讯接口 LQFP-128 VKS232 2.4～5.2V 116seg*2com 偏置电压1/1 1/2 4线通讯接口 LQFP-128 以上介绍内容为IC参数简介，难免有错漏，且相关IC型号众多，未能一一收录。欢迎联系索取完整资料及样品！ 请加许先生 QQ：191 888 5898联系！谢谢
标签： 1640 1640B 1629 SSOP 6932 VK 24 TM 脚位 封装
上传时间： 2018-11-26
上传用户：szqxw1688
VIP专区-嵌入式/单片机编程源码精选合集系列（121）资源包含以下内容：1. U盘对考的例子程序 U盘对考的例子程序.2. The book is organized around 55 specific guidelines, each of which describes a way to write better C.3. CC2430DB电路图.4. tms320c6000 将用户程序写入到flash.5. 是法国NUM数控系统1006的PLC控制软件。.6. 一本关于C8051F原理和应用的书.7. 19264说明与显示程序,对学习19264初学者很有用.8. 一个经典的东东.9. SD卡的SD模式的读写驱动.10. LPC2142 LCD12232的显示动画例程.11. 一段菜单与界面的程序 效果很好 有图片展示.12. 本驱动程序是24064液晶(肇庆金鹏产品 型号Ocmj4×15D)上使用 控制器为8822 MCU为89S52 效果很好。可以用于8822控制器上的液晶.13. blackfin533开发FFTC语言实现.14. GUI设计.15. 梁祝乐曲演奏电路设计.16. USB网卡dm9601芯片的驱动程序.17. 实现51与计算机的通信测试 通过1602LCD显示通信的数据.18. 本科教育的实体实例.19. S3C44B0学习板原理图.20. 液晶显示模块概述 一、液晶显示模块概述 RT19264D汉字图形点阵液晶显示模块.21. 嵌入式硬件设计实用手册.22. 射频识别利用nrf 2401芯片实现收发功能.23. 基于DE2实验板.24. bc7281b芯片在avr单片机上的应用.25. I2C eprom 读写程序设计.26. ds1302的中文资料.27. FPGA的英文资料,介绍的比较详细EPF10系列的.28. 基于数码管的四位动态同步显示.29. ATMEL169PV,开发详细资料,其中包含源程序代码.30. 高频波形.31. TL431应用.TL431,A、B集成电路是三端可编程并联稳压二极管。.32. uart pci 等verilog hdl 代码.33. HD300 Mp3播放器电路图 CPU部分.34. 通过VERILOG HDL语言使用CPLD连接PS2键盘..35. dspic61010A串口通讯程序.36. PIC单片机的C语言编程.37. protel 设计电路的相关资料,暂时只有一部分,等我再传.38. 采用异步方式传送数据.39. 一种好的统计参数估计方法．其中的原代码为国外学者编写.40. 这个源代码是关于利用MODEM实现单片机与PC通信的程序.
标签： 光电检测技术
上传时间： 2013-07-05
上传用户：eeworm
资源包含以下内容：1.2 COMP CHILLER.rar2.20-COMM-E Adapter Diagnostics.zip3.3 Phase Motor Startup Logic.zip4.500编程实例.rar5.550 OPTICOLOUR MOINITORING TM EDIT.rar6.6688-02.rar7.6[1].下降沿和锁存指令试验.rar8.72 Station Bit Shift PLC Program Triggers 3 Cognex Cameras.zip9.AB 1769-WS称重模块使用程序Compactlogix.zip10.AB 1769-WS称重模块使用程序micrologix.zip11.AB 5000的程序（老外的）带伺服控制.rar12.AB L35E做的除尘器主要逻辑程序.rar13.AB PID实例仿真.rar14.AB PID实例仿真.rar.rar15.AB RSLogix 500 编写的程序，里边有典型温度PID控制部分.rar16.AB SLC 5-04 PLC Communicating with PowerFlex 4 40 drives..zip17.ab slc500 的程序.zip18.ab slc500 的程序1.zip19.AB1 PLC PTO-PWM如何控制脉冲输出的范例.rar20.AB_5 plc templates.zip21.AB_SLC500例程.RAR22.AB例子.rar23.Air Handling Unit.rar24.ALARM CODES.rar25.Allen Bradley Count and Move Example.rar26.Allied_18_03_05b.ACD27.ALTERNATOR METHODS.rar28.Anti-Tie Down.zip29.ASCII Write-read to ML1100 and R320 scale.zip30.Basic One Button Toggle 1.0.zip31.Binary Clock.rar32.Bit Pattern.rar33.Bit Shift Example.zip34.C3BCCXG.rar35.C3BCCXG_BAK311.rar36.christmas lights.rar37.CNET_messaging.rar38.CompactLogix_IO_Example.rar39.Complete Index Table.zip40.complete program for an automated brick packaging machine.rar41.Converting integer up to 16 to bit pattern.rar42.CONVEYOR ALTERNATOR CONTROLS.rar43.Conveyor FIFO (first in first out) w-Reject.zip44.Conveyor FIFO first in first out wReject.rar45.Counter as Timer.rar46.Cycle Countdown.zip47.Day of the week.zip48.Day of Week + Week Number + Auto BST adjustment.zip49.Day-of-Week Calculation for SLC 1.0.zip50.DaylightSavingAbsolute.rar51.Daylight_Savings_CLX.zip52.dcs.rar53.DeviceNet网络组态.rar54.Dialing a Cell Phone with a Micrologix 1500 using a Modem Attached.zip55.DnetExample.zip56.EAUDITOR1.rar57.Ethernet Link Status.zip58.FFL AND FFU.zip59.Flash an output a different number of times for different alarm conditions.rar60.Fuzzy Logic Add-on for RSLogix 5000.rar61.Generic Sequencer.zip62.HOME CONTROL BY PLC.zip63.Hot Water Heat Exchanger Control.rar64.Indirect Addressing - Pallet Tracking Brick Yard 500.zip65.Indirect Addressing Example.zip66.InView 2706-P42C w-Ethernet IP ASCII Example Code.zip67.i_canoe's Best Sequencer.zip68.Lead Lag Exhaust Fan Control.rar69.logix5000的一个例程，关于显性连接.rar70.LONG DURATION PRECISION TIMER.rar71.Micrologix 1000 DDE Demo.zip72.MicroLogix 1100 Ethernet to Cognex Message.zip73.Micrologix 1200 HSC Configuration.zip74.MicroLogix 1500 ASCII Input example.zip75.MicroLogix 1500 DNet MSG to multiple PF40.zip76.micrologix 1500 sequence control and valve bank control of vacuum pump set.rar77.micrologix1500高速脉冲输出例子.rar78.MicroLogix应用案例.rar79.Misbehaving Axis.rar80.ML1000 monitors call for input signal; controls loader & cleaner conveyor.rar81.ML1000 Washing Machine Program using a step counter as a sequencer.zip82.ML1200 prog for precision chain oiling.rar83.mlhem slc500 program.rar84.MMS_040305.zip85.MODBUS例子程序.rar86.MODBUS通讯例程.rar87.MSG_PF40_Example.zip88.New Sequencer w-Bit Shift for Tracking.zip89.ONE BUTTON 3 O-P.pdf90.ONE BUTTON MOMENTARY.zip91.Pallet Queue Handling (FIFO) Logix5000.rar92.PC Module Status.zip93.PH CONTROL FLOW PACED WTP .rar94.Philip W's Simple Sequencer.zip95.Photoeye Make and Break Logic.zip96.Pick-n-Place Sequencer.zip97.Production TAKT Timer - PLC Program.zip98.RAMP Function Example Logic.zip99.Read Monitoring Parameters from E3 with SLC-5-0x.zip100.RS5000 Add-On Sequence Timer wpast times.rar101.RS5K的例子和RSME是一起.rar102.rslinx_opc.rar103.RsLogix 500 SQC SQO Basic Sequencer.zip104.RSLogix500 program to sort up to 255 numbers from smallest to largest.rar105.RSLogix500.One单次触发中方案输出试验.rar106.RSLogix500.OSR上升沿3中方案输出试验.rar107.RSLogix500.比较指令试验.rar108.RSLogix500.煤气阀开指令简化试验.rar109.RSLogix500.试验脉冲输出.rar110.rslogix5000 modbus通讯程序.rar111.RSLOGIX5000 例程 V151.rar112.RSLOGIX5000 例程 V152.rar113.RSlogix5000的几个例程.zip114.rslogix5000编程实例.rar115.RSLOGIX500编程步骤.rar116.Sample PLC Intergration with a Mold Machine.zip117.Sartorius SBI protocol parse.zip118.Save Version 2.0.zip119.Save.zip120.Sequence rotate 3 Outputs With 1 PB.rar121.Sequencer (SQO) Example - flashes 6x6 LED array with pre-loaded patterns.rar122.Shawn Michael - Micro1200 to PowerFlex4 via Modbus and AIC+.zip123.Simple 48 Step Sequencer.zip124.SLC 500 冗余程序例子.rar125.SLC ADD MANY REGISTERS AND AVERAGE THE VALUE.zip126.SLC CLOCK CHANGE FOR DAY LIGHT SAVINGS TIME.zip127.SLC to a Mettler Toledo BBK Scale RS-232 (thru Devicenet).zip128.SLC 处理器 PID 实例.rar129.SLC5-03 added to process line, watches for panel, sequence starts then times out to shutdown.rar130.SLC5-04 that monitors signals to, and output from, 3 metering pumps for copper plating tank.rar131.SLC500 monitors panels in dip line & replenishes 2 chemicals as needed.rar132.SLC500 Operating a Turntable Tapping machine with thread check probe.rar133.SLC500 PID例程(ENGLISH).rar134.Slc500_ pid.rar135.SLC500伺服控制和机器人控制程序.rar136.SLC500冲床.rar137.SLC500工程实例.rar138.SLC500系统MODBUS（RS485）通讯程序.rar139.Small Pumping Station Example using Subroutines.zip140.stepper motor.rar141.Table top conveyor tapping maching with thread check, SLC500, built to tap nuts for Saturn cars.rar142.Tank program.zip143.Temperature Trend Direction Flag.zip144.the overtravel switches for servos.rar145.Toggle Bit.zip146.TOGGLE-BIT BY STATUS BIT's.pdf147.TRAFFIC LIGHT, both directions with pedestrian walk, using 1 timer.rar148.Train crossing.rar149.Trane Chiller Chilled Water Reset.rar150.TRUNCATE IEEE754 FLOAT.zip151.TShark Triggering.zip152.Water treatment plant PH Control program using CO2 injection.rar153.[MMS_039839]Copying a DINT variable to Ebool array, Count no. of high bits and it's location.zip154.[MMS_039840]ASCII_Messaging.zip155.[MMS_040305]ASCII Read , Write for CompactLogix & Bul900 single loop temperature Controller.zip156.[MMS_040306]Configuration of AMCI 3601 Single Axis Stepper Motor Controller with CompactLogix..zip157.[MMS_040307]MD60, MD65 Drives control with CompactLogix.zip158.[MMS_040315]Double INC and Double DEC of INT datatype.zip159.[MMS_040316]DINT Conversion of INT data type and Arithmatic comparison between the values..zip160.[MMS_040317]DINT Conversion of INT data type and Arithmetic operations like Div, Mul, Sub and Add..zip161.[MMS_040318]DINT data type to String data type conversion..zip162.[MMS_040319]Swaps Byte in an array..zip163.[MMS_040322]Decoding of Boolean array..zip164.[MMS_040323]Encoding of Boolean array..zip165.[MMS_040324]Value search in an array..zip166.[MMS_040325]Bubble sorting.zip167.[MMS_040326]Level control using FBD..zip168.[MMS_040327]Ramp Control of Electrical parameters..zip169.[MMS_040328]Data Comparision of value in array files..zip170.[MMS_040329]Battery testing application..zip171.[MMS_040330]Using any Logix processor as either a Modbus RTU master or slave..zip172.[MMS_040331]Photoeye detector make and break logic..zip173.[MMS_040340]AMCI 1642 2-Ch resolver interface module configuration with CompactLogix..zip174.[MMS_040342]Programming and configuring AMCI, SSI Interface 7662 module with CompactLogix..zip175.[MMS_040343]PID Control of Temperature..zip176.[MMS_040345]Configuring SST Profibus connectivity Module..zip177.[MMS_040362]Sequential Startup of motors..zip178.[MMS_040369]Messaging between CompactLogix Controller on ControlNet.zip179.[MMS_040370]Messaging between CompactLogix Controller on Ethernet..zip180.[MMS_040371]Communication between CompactLogix Controllers on DeviceNet..zip181.[MMS_040372]Controlling Point I-O Over EtherNet..zip182.[MMS_040373]Controlling Point I-O on ControlNet..zip183.[MMS_040374]Controlling Point IO Over Devicenet..zip184.[MMS_040375]Controlling Point I-O Over DeviceNet..zip185.[MMS_040376]PanelView Plus with CompactLogix over EtherNet-IP..zip186.[MMS_040377]PanelViewPlus with Compactlogix Via Serial port.zip187.[MMS_040378]PanelView Plus in both master and slave mode..zip188.[MMS_040379]PanelView Plus Unscheduled communication over ControNet.zip189.[MMS_040380]PanelView Plus Scheduled communication over ControNet.zip190.[MMS_040381]Metal refining Application..zip191.[MMS_040382]Application of Fabric Calender..zip192.[MMS_040383]Application of Fabric Extruder..zip193.[MMS_040384]Winder Application.zip194.[MMS_041055]Structured Text bubble sort.zip195.[MMS_041135]DriveLogix Absolute Position.zip196.[MMS_041136]SynchLink System PowerFlex 700S.zip197.[MMS_041144]Logix with PowerFlex 4-class drive on EtherNet-IP.zip198.[MMS_041145]Controlling Point I-O on DeviceNet.zip199.[MMS_041146]Simple control of EtherNet-IP Point I-O.zip200.[MMS_041147]Boiler Control Module.zip201.[MMS_041148]Make-up Air Handler control for Semiconductor Unit.zip202.[MMS_041149]Recirculating Air Handler control for Semiconductor Unit.zip203.[MMS_041150]Scrubber Unit control for Semiconductor Unit.zip204.[MMS_041151]ASCII communication with CompactLogix L35E.zip205.[MMS_041152]Control for Shampoo skid.zip206.[MMS_041153]Control for Shampoo skid.zip207.[MMS_041154]Distilizer control for Alcohol.zip208.[MMS_041155]Polled Data Transfer on DeviceNet between CompactLogix and Panel View Standard.zip209.[MMS_041156]CompactLogix PV Standard Dnet Polled Data Transfer.zip210.[MMS_041196]Powder Coating.zip211.[MMS_041220]Standard Motion Starting Point.zip212.[MMS_041221]Motion on a ControlLogix.zip213.[MMS_041223]Motion Control fault capture logic and HMI screens.zip214.[MMS_041231]Bar Code Printing.zip215.[MMS_041232]Monitor I-O Connections in Logix.zip216.[MMS_041233]Convert DINT to INT in Logix controllers.zip217.[MMS_041234]Logix Fault Handler.zip218.[MMS_041235]Inhibit, uninhibit servo motion axis.zip219.[MMS_041236]Phase Manager Batch Process Application.zip220.[MMS_041259]Hydraulic Valve Control in Blast Furnace.zip221.[MMS_041285]Power Programming with Phase Manager (ACD).zip222.[MMS_041368]Gypsum Feed Control.zip223.[MMS_041369]Dust Collection.zip224.[MMS_041391]Cement Silo charging.zip225.[MMS_041392]Mill feed and Auxilary Control.zip226.[MMS_041393]FlyAsh Silo charging.zip227.[MMS_041394]FlyAsh Transport control.zip228.[MMS_041395]Clinker feeding.zip229.[MMS_041396]Cement Packers and Transport.zip230.[MMS_041397]Reading CLX_val using EWEB.zip231.[MMS_041450]PID Control of Temperatue in Yarn Spining.zip232.[MMS_041451]PID Control of Pressure in Yarn Spining.zip233.[MMS_041452]Speed Controls in Plastic Extrusion.zip234.[MMS_041471]DeviceNet Warm Backup.zip235.[MMS_041472]ControlNet warm backup.zip236.[MMS_041473]Input Time Stamping.zip237.[MMS_041516]InView Message Display on L35E or ControlLogix.zip238.[MMS_041553]ControlNet Connection and Media Status.zip239.[MMS_041574]Ethernet Diagnostics Module.zip240.[MMS_041621]Alarm-low processor battery.zip241.[MMS_041930]Control Modules to control a Valve and Motor.zip242.[MMS_042348]Using an Ultra3000 as an Indexer on DeviceNet with a CompactLogix.zip243.[MMS_042349]How to read-write data to-from a PLC using OPC in Visual Basic 6.zip244.[MMS_042350]How to send-receive SMS text messages using Westermo modem.zip245.[MMS_042351]How to switch the mode of a CLX serial port.zip246.[MMS_042352]How to trigger an Autotune of a PIDE Function Block.zip247.[MMS_042463]FlyingShear Sample.zip248.[MMS_042496]Data Buffering and Handshaking example.zip249.[MMS_042497]Using Phase Manager to Build a Scalable Batching Solution.zip250.[MMS_042504]Logix5000 interface to Atlas-Copco Tool Controller over EtherNet-IP.zip251.[MMS_043071]Phase Manager and a Scalable Batching Solution.zip252.[MMS_043640]DeviceNet Diagnostic.zip253.[MMS_043659]ControlNet Diagnostic with PF70 & Flex I-O.zip254.[MMS_043846]Power Programming with Phase Manager 1.1.zip255.[MMS_043847]Power Programming with Phase Manager 1.1 Trainings Package.zip256.[MMS_043879]Programming in SFC and ST Language.zip257.[MMS_043934]1769-SM2 Compact I-O to DSI Module - Single Mode Operation.zip258.[MMS_043935]1769-SM2 Compact I-O to DSI Module - Multi-Drive Mode Operation.zip259.[MMS_043949]1769-SM1 Compact I-O to SCANport-DPI Module.zip260.[MMS_044019]Event Viewer for Factory Talk Batch Electronic Batch Journals.zip261.[MMS_044022]Third Party Drive to PowerFlex Drive Replacement on DeviceNet.zip262.[MMS_044023]Display of number of Output's ON in a given instance.zip263.[MMS_044098]1769-ASCII Simultaneous Mode.zip264.[MMS_044099]1769-ASCII in Alternating Mode.zip265.[MMS_044100]1769-ASCII, MicroLogix 1500.zip266.[MMS_044148]PLC to PLC Heartbeat Watchdog.zip267.[MMS_044151]Configuring Profibus PA into RSLogix5000.zip268.[MMS_044314]Reading Profibus PA Data from Control Sistem ControlLogix.zip269.[MMS_044386]1769-SM2 Compact I-O to DSI Module - Multi Drive Mode Operation - with complete tag structure.zip270.[MMS_044518]bagger machine.zip271.[MMS_044661]Control three boiler elements in Fieldbus Foundation.zip272.[MMS_044663]Control daisy chain wiring in Fieldbus Foundation.zip273.[MMS_044666]Translation N-A.zip274.[MMS_044667]Translation N-A.zip275.[MMS_044695]ME Faceplates for 1756 Digital and Analog I-O.zip276.[MMS_044696]ME Faceplates for 1797 Digital and Analog I-O.zip277.[MMS_044697]ME Faceplates for 1794 Digital and Analog I-O.zip278.[MMS_044701]Logix Controller Date.zip279.[MMS_044710]Temperature Converter.zip280.[MMS_044711]Controlling with totalizer through Fieldbus Foundation.zip281.[MMS_044712]Feed Forward control in Fieldbus Foundation.zip282.[MMS_044713]Math and Compare operations with 64-bit Long Integer Tags LINT Data Type in RSLogix5000 ver 16.zip283.[MMS_044714]SCP Scale w-Parameters AOI for RSlogix 5000 ver 16.zip284.[MMS_044715]PV variable of PA instrument in the ControlLogix.zip285.[MMS_044716]Configurable WALLCLOCKTIME attributes (V16 and above).zip286.[MMS_044717]LPS and PlantMetrix Interfacing Code.zip287.[MMS_044723]IF4FXOF2F Generic Profile Example.zip288.[MMS_044727]MicroLogix 1500 reading multiple PF40 Drives.zip289.[MMS_044765]Speed up searches of Logix5000 Arrays using a Binary Search Add-On Instructions.zip290.[MMS_044766]Configurable Flow Meter Module in Generic profile.zip291.[MMS_044786]ME Faceplates for 1769 Digital and Analog I-O.zip292.[MMS_044787]ME Faceplates for 1734 Digital and Analog I-O.zip293.[MMS_044788]ME Faceplates for 1738 Digital and Analog I-O.zip294.[MMS_044909]DeviceNet Scanner Archive Logic for Multiple Scanners.zip295.[MMS_044928]Formulation Manager for Factory Talk Batch.zip296.[MMS_044968]Add On Instructions Scale Value.zip297.[MMS_044973]AOI-Scale with Rate.zip298.[MMS_044974]AOI for LD Scale Value.zip299.[MMS_044975]Automotive Ball Press.zip300.[MMS_044992]ME Faceplates-AOIs for PowerFlex Drives V1617.zip301.[MMS_045101]KAT Program-HMI for a 1 Axis Motion Application.zip302.[MMS_045102]KAT Program-HMI for a 2 Axis Motion Application.zip303.[MMS_045103]KAT Program-HMI for a 3 Axis Motion Application.zip304.[MMS_045104]KAT Program-HMI for a 4 Axis Motion Application.zip305.[MMS_045105]KAT Program-HMI to build Multi-Axis Count Motion Applications and use different size displays.zip306.[MMS_045106]KAT HMI template and Instructions for a Multi-language Applications.zip307.[MMS_045107]KAT Excel Fault Analysis Routine.zip308.[MMS_045169]DeviceNet Modular DSA Auto Accept Configuration Application.zip309.[MMS_045617]AOI for Logix platform.zip310.[MMS_045618]AOI for Logix platform.zip311.[MMS_045718]Vertical Axes Torque Control Pickup.zip312.[MMS_045719]Rotary Knife with SoftLogix.zip313.[MMS_045740]Handling manual movement of axis using an Add On Instruction (AOI), AMMH (Axis Manual Move Handling).zip314.[MMS_045748]Converting movement of Virtual Axis in real movement over PowerFlex Drives without any motion module.zip315.[MMS_045777]Enhanced Reporting for FactoryTalk Batch.zip316.[MMS_045780]Time Stamping with Logix Alarms and Events.zip317.[MMS_045783]Enhanced Event Archiving for Factory Talk Batch.zip318.[MMS_045830]Date-Time.zip319.[MMS_045845]Process AOI and Faceplate-Analog Input.zip320.[MMS_046016]How to read K6k 7 Segment Display Fault Code on RSLogix5000.zip321.[MMS_046052]ME Faceplates for DeviceNet Diagnostics in a Logix Controller Phase 2.zip322.[MMS_046057]AOI - Count bit's ON in DINT.zip323.[MMS_046177]Configuring Mvi69 Hart Module with CompactLogix..zip324.[MMS_046180]CompactFlash Data Storage.zip325.[MMS_046233]Tank Volume AOI.zip326.[MMS_046250]Configuration for AMCI 7662 SSI module (1769 I-O system).zip327.[MMS_046251]Converter - REAL to 28-bit, dual INT as used by AMCI.zip328.[MMS_046252]AMCI 7662 programmatic constants UDT.zip329.[MMS_046257]Communication Between 1756-DH-RIO & 1771-ASB Module.zip330.[MMS_046258]1794-IE8H Hart Module 8-Channel data collection Code.zip331.[MMS_046270]Mettler-Toledo IND780 AOP file and sample code for ControlNet and Ethernet-IP.zip332.[MMS_046304]FX2R.zip333.[MMS_046305]R2FX.zip334.[MMS_046315]GLX_Example.zip335.[MMS_046317]Auto-Manual Toggle Add-On Instruction.zip336.[MMS_046318]Scale with Parameters Add-On Instruction.zip337.[MMS_046353]using RSlogix v16 alarming instructions with RSViewSE-32 and FactoryTalk View ME.zip338.[MMS_046356]SELX.zip339.[MMS_046360]Counting Number of TRUE I-O Points.zip340.[MMS_046361]Reversing Bit Order in a INT-DINT.zip341.[MMS_046393]Motor Speed Reference.zip342.[MMS_046427]String Decoder.zip343.[MMS_046451]xNC - CNC functionality for Logix processors.zip344.[MMS_046452]Ultra 3000 Devicenet Configuration for SLC, CompactLogix or MicroLogix.zip345.[MMS_046453]ME Faceplates-AOIs for E3 Plus Overload Relays on DeviceNet.zip346.[MMS_046456]ME Equipment Status Summary Faceplate for PowerFlex, Kinetix, E3 Plus,.zip347.[MMS_046457]Mettler-Toledo Automated Precision Weighing Modules on DeviceNet.zip348.[MMS_046459]InView on EtherNet Add On Instruction.zip349.[MMS_046461]PID with CV Limiting and Full-Range Manual Control.zip350.[MMS_046462]Axis Dry Run using an Add On Instruction (AOI), MADR (Motion Axis Dry Run).zip351.[MMS_046463]ME Alarm History Faceplate for PowerFlex, Kinetix, E3 Plus,.zip352.[MMS_046466]SE Faceplates for 1734 Digital and Analog I-O.zip353.[MMS_046467]SE Faceplates for 1738 Digital and Analog I-O.zip354.[MMS_046468]SE Faceplates for 1756 Digital and Analog I-O.zip355.[MMS_046469]SE Faceplates for 1769 Digital and Analog I-O.zip356.[MMS_046505]Homing to overtravel & Recovery from overtravel.zip357.[MMS_046506]SE Faceplates for 1794 Digital and Analog I-O.zip358.[MMS_046507]SE Faceplates for 1797 Digital and Analog I-O.zip359.[MMS_046508]MVI56-MCM (Add On Instruction (AOI)).zip360.[MMS_046509]SE Faceplates-AOIs for PowerFlex Drives on ENet or CNet V16V17.zip361.[MMS_046632]AOI and Global Object for Hirschmann RS20-MS20 switches.zip362.[MMS_046643]ME faceplate for EtherNet-IP Diagnostics V2.zip363.[MMS_046644]ME Faceplates for ControlNet Diagnostics.zip364.[MMS_046682]ME Faceplates for 1734 Digital and Analog I-O with Descriptions.zip365.[MMS_046683]ME Faceplates for 1738 Digital and Analog I-O with Descriptions.zip366.[MMS_046684]ME Faceplates for 1756 Digital and Analog I-O with Descriptions.zip367.[MMS_046685]ME Faceplates for 1769 Digital and Analog I-O with Descriptions.zip368.[MMS_046686]ME Faceplates for 1794 Digital and Analog I-O with Descriptions.zip369.[MMS_046687]ME Faceplates for 1797 Digital and Analog I-O with Descriptions.zip370.[MMS_046688]Managing a Crank Geometry.zip371.[MMS_046691]Integrated Architecture Foundations of Modular Programming.zip372.[MMS_046777]Monitoring E3-E3+ using SLC-5-0x.zip373.[MMS_046826]Managing a Crank Geometry (Rev1).zip374.[MMS_046827]Obtain the master position in a CAM for a given slave value.zip375.[MMS_046847]1769-SM2 Compact I-O to DSI Module - AOI for Multi Drive Mode Operation- with complete tag structure.zip376.[MMS_046908]Motor Monitor.zip377.[MMS_046957]Obtain the master position in a CAM for a given slave value (opposite of MCSV).zip378.[MMS_046989]KAT with Code Sequencer.zip379.[MMS_047084]Set and index trajectory of motion systems using an Add On Instruction, MPI (Motion Profile Indexer).zip380.[MMS_047096]Zeller Calculation.zip381.[MMS_047178]Generic Connection for the 1756-HSC Ser A Rev 2.1-Ser B Rev 3.X, ACD Rev 3.zip382.[MMS_047202]Motor Starter FVNR.zip383.[MMS_047209]Motor Starter FVR.zip384.[MMS_047221]Time cursors to measure elapsed time.zip385.[MMS_047223]Motor Starter VFD.zip386.[MMS_047224]Motor Monitor.zip387.[MMS_047273]Monitor Cutting Tools-Saw.zip388.[MMS_047307]RSSql Handshaking Add-on Instruction.zip389.[MMS_047317]Motor Sequence Starter.zip390.[MMS_047332]SLC 500 to 20-Comm-R RIO I-O Messaging.zip391.[MMS_047333]Motor Sequence Starter with timers to start.zip392.[MMS_047409]ViewSE Optional Numeric Keypad (Min-Max).zip393.[MMS_047415]Safety Device Logic and Guard I-O Configuration for GuardLogix Systems.zip394.[MMS_047416]ME Faceplates-AOIs for GuardLogix Safety Systems.zip395.[MMS_047490]Library of Add-On Instruction to control InView displays.zip396.[MMS_047601]AOI to Toggle Input Push Button.zip397.[MMS_047643]AOI ISO Weeknumber.zip398.[MMS_047737]System Time 64Bit Interpreted AOI.zip399.[MMS_047773]Convert Feet to Millimeters.zip400.[MMS_047774]Convert Millimeters to Feet and Inches.zip401.[MMS_047811]SAF1 - Store.zip402.[MMS_047891]ME Faceplates-AOIs for PowerFlex Drives - Chinese V5V16.zip403.[MMS_047909]Controlling a Danfoss FC302 via Ethernet-IP.zip404.[MMS_047978]Sample Code Website Test.zip405.[MMS_048112]Motor Jog FVr.zip406.[MMS_048132]Synchronizing Controller WCT using 1588 CIP SYNC..zip407.[MMS_048134]Time Stamping SOE Events using CIP SYNC..zip408.[MMS_048165]Torque Converter for Servo Motor-AOI-Torque Feedback (% to Nm) and Peak Torque-Force Lim (Nm to %).zip409.[MMS_048245]Deciphering OB16D status bits.zip410.[MMS_048275]Dynamix Surveillance Accelerator Toolkit Logix Files.zip411.[MMS_048276]Dynamix Surveillance Accelerator Toolkit View File.zip412.[MMS_048292]Torque Disturbance Detector for Motion Axis.zip413.[MMS_048295]Translated FactoryTalk Alarms and Events displays.zip414.[MMS_048463]ME-SE Faceplate-AOIs for Stratix 8000 Switches.zip415.[MMS_048469]ME Faceplate-AOI for Stratix 8000 for PanelView Plus 600.zip416.[MMS_048785]An AOI to convert movement of Virtual Axis in real movement over AC induction motors PowerFlex 700 V.zip417.[MMS_049047]JulianDay.zip418.[MMS_049136]ME-SE Faceplates AOIs for PowerFlex Accelerator Toolkit.zip419.[MMS_049157]Daylight Savings.zip420.[MMS_049158]5xRFID (EIP) Interface and the Logix Platform.zip421.[MMS_049188]ME Faceplate-AOI for Kinetix Servo Drives Rev 3 (V16V4).zip422.[MMS_049334]AOI_ABSPOS_Converts incremental position to absolute.zip423.[MMS_049390]Factory Talk View ME Face Plate for 9300-8EDM.zip424.[MMS_049408]Convert DINT SIG to UNSIG.zip425.[MMS_049409]Generate setpoint speed.zip426.[MMS_049473]Consolidated InView Messaging AOIs.zip427.[MMS_049928]Polinomial CRC16 Data Check Algorithm.zip428.[MMS_049996]Bit Set-Reset.zip429.[MMS_050367]Elapsed Timer.zip430.[MMS_050368]Timer Count Down to Zero.zip431.[MMS_050370]SE Faceplates for 1756 Digital and Analog I-O with Descriptions.zip432.[MMS_050371]SE Faceplates for 1734 Digital and Analog I-O with Descriptions.zip433.[MMS_050372]SE Faceplates for 1738 Digital and Analog I-O with Descriptions.zip434.[MMS_050373]SE Faceplates for 1769 Digital and Analog I-O with Descriptions.zip435.[MMS_050374]SE Faceplates for 1794 Digital and Analog I-O with Descriptions.zip436.[MMS_050375]SE Faceplates for 1797 Digital and Analog I-O with Descriptions.zip437.[MMS_050376]SE Faceplate-AOI for Kinetix Servo Drives V1617.zip438.[MMS_050469]ME Faceplates for Powermonitor1000 on EnetNet-IP.zip439.[MMS_050494]Propagating SOE Time Stamp Data to an FTViewSE Alarm Banner in a Standard CLX Redundancy System.zip440.[MMS_050565]Select A Bit.zip441.[MMS_050593]ME Faceplates for 1769 Digital and Analog I-O -Chinese V5V16.zip442.[MMS_050800]SE Faceplates-AOIs for E3 Plus Overload Relays on DeviceNet.zip443.[MMS_050801]SE Equipment Status Summary Faceplate for PowerFlex, Kinetix, E3 Plus,.zip444.[MMS_050805]Ultra 3000 SERCOS Error Code Capture and History.zip445.[MMS_051271]SMS messaging with Micrologix.zip446.[MMS_051276]DeviceNet Node Commissioning Application for Logix.zip447.[MMS_051325]Elasped Time Add-on Instruction.zip448.[MMS_051450]PVc600 PID Faceplates.zip449.[MMS_051517]ME-SE Faceplate-AOIs for Stratix 6000 Switches.zip450.[MMS_051519]ME Faceplate-AOI for Stratix 6000 for PanelView Plus 600.zip451.[MMS_051612]Using a Logix Controller to Write Read Data to- from an Alien (UHF) Reader Model 9780 and 9800.zip452.[MMS_051617]Number Converter AOI.zip453.[MMS_052014]GuardPLC 1600 Lab for Democase.zip454.[MMS_052015]GuardPLC 1600 code for democase.zip455.[MMS_052028]ControllerLogServices.zip456.[MMS_052047]Simple Speed Control Building Block.zip457.[MMS_052048]Simple Position Control Building Block.zip458.[MMS_052049]Simple Temperature Control Building Block.zip459.[MMS_052050]Simple Position Control via HMI Building Block.zip460.[MMS_052051]Simple Motor Control Building Block.zip461.[MMS_052052]Simple RGB Color Sensing Building Block.zip462.[MMS_052053]SmartGuard 600 and MicroLogix Communication Building Block.zip463.[MMS_052054]SmartGuard 600 E-Stop Building Block.zip464.[MMS_052055]SmartGuard 600 Single Zone Safety Gate Building Block.zip465.[MMS_052057]SmartGuard 600 Dual Zone Safety Gate Building Block.zip466.[MMS_052058]SmartGuard 600 Laser Scanner Building Block.zip467.[MMS_052059]SmartGuard 600 E-Stop and Safety Mat Building Block.zip468.[MMS_052060]SmartGuard 600 Locking Gate and Guard I-O Building Block.zip469.[MMS_052061]SmartGuard 600 Light Curtain and Guard I-O Building Block.zip470.[MMS_052062]SmartGuard 600 Bi-directional Muting Light Curtain Building Block.zip471.[MMS_052162]ME Faceplates-AOIs for SMC Flex Smart Starters V4-V16.zip472.[MMS_052248]Simple Alarm Coordination Building Block.zip473.[MMS_052255]DeviceNet Motion KAT_L2x_1axis.zip474.[MMS_052259]DeviceNet Motion KAT_L3x_1axis.zip475.[MMS_052260]DeviceNet Motion KAT_L3x_2axis.zip476.[MMS_052261]DeviceNet Motion KAT_L3x_3axis.zip477.[MMS_052301]Dynamix Machine Profile for Conveyor.zip478.[MMS_052302]Dynamix Machine Profile for Motor and Fan.zip479.[MMS_052303]Dynamix Machine Profile for Motor and Pump.zip480.[MMS_052304]Dynamix Machine Profile for a Machine Roll.zip481.[MMS_052306]Dynamix XM-122 gSE AOI.zip482.[MMS_052307]Dynamix Sequencer AOI.zip483.[MMS_052439]Sunrise-Sunset.zip484.[MMS_052442]eProcedure for Mobile devices.zip485.[MMS_052443]Simple Taught Color Sensing Building Block.zip486.[MMS_052709]DataSite to CLX Master Accelerator Toolkit.zip487.[MMS_052710]DataSite to ME Master Accelerator Toolkit.zip488.[MMS_052711]DataSite to SE MasterAccelerator Toolkit.zip489.[MMS_052836]Analog in - discrete out.zip490.[MMS_052875]ME Faceplate_AOI for Kinetix Servo Drives Rev 4 (V17_V5).zip491.[MMS_052903]Hardy 1769 weigh scale AOP - Add On Profile.zip492.[MMS_052929]PowerFlex 70.zip493.[MMS_052942]PF755 Demo_Scale Block.zip494.[MMS_052943]PF755 Demo_Diverter Example.zip495.[MMS_052944]PF755 Demo_RTC Example.zip496.[MMS_052945]PF755 Demo_Selector Switch.zip497.[MMS_052946]PF755 Demo_Wet Well Example.zip498.[MMS_052963]Step Sequencer AOI.zip499.[MMS_052964]Tank Volume with handlers and end caps.zip500.[MMS_052965]Simple Modbus Slave Kit for Logix Processors.zip501.[MMS_052973]ME Faceplate-AOI for Kinetix Servo Drives Rev 4 (V17-V5)).zip502.[MMS_053014]Divide LINT by DINT.zip503.[MMS_053105]Motion profile generator for 8 cam laws using an AOI, Motion Axis Complex Move (MACM).zip504.[MMS_053118]Dynamix Seq Dwell PVP400 grey.zip505.[MMS_053204]Batch Campaign Manager Source Code.zip506.[MMS_053207]ME-SE Faceplate-AOIs v2 for Stratix 8000 Switches.zip507.[MMS_053304]SERCOS PacML 3_0 KAT.zip508.[MMS_053305]SERCOS Simple Sequencer KAT.zip509.[MMS_053306]SERCOS Phase Manager KAT.zip510.[MMS_053309]ME PV+600 Faceplate-AOIs v2 for Stratix 8000 Switches.zip511.[MMS_053453]ME Faceplates for Logix Processors.zip512.[MMS_053504]Wipotec Weight Cell - SW.zip513.[MMS_053607]Complete step profile update by one MSG.zip514.[MMS_053635]PCam Profile Display AOI.zip515.[MMS_053644]FactoryTalk VantagePoint integration into FactoryTalk View SE Demo Content.zip516.[MMS_053656]heat control.zip517.[MMS_053662]AOI for QTS-CLX-PVX PROVOX Module REV 1.1.zip518.[MMS_053717]EStop-Gate Switch Building Block.zip519.[MMS_053719]Motion PTO Building Block.zip520.[MMS_053720]Simple Package Measurement Building Block.zip521.[MMS_053802]Water Wastewater Accelerator Factory Talk View HMI Application.zip522.[MMS_053803]Water Wastewater Accelerator Logix Code.zip523.[MMS_053815]SE Faceplates-AOIs for SMC Flex Smart Starters V4V16.zip524.[MMS_054248]Energy System Project Files.zip525.[MMS_054307]ME Faceplates for E1 Plus Overload Relay on DeviceNet.zip526.[MMS_054308]SE Faceplates for E1 Plus Overload Relays on DeviceNet.zip527.[MMS_054314]FactoryTalk Historian Tag Toggler.zip528.[MMS_054334]Logix-PanelView Plus Calculator Tool.zip529.[MMS_054397]Bi-Direction 2 Sensor L-Type Muting w-3rdEnable Building Block.zip530.[MMS_054399]Bi-Direction 4 Sensor T-Type Muting Building Block.zip531.[MMS_054400]Pump Control Building Block.zip532.[MMS_054402]Single Direction 2 Sensor L-Type Muting Building Block.zip533.[MMS_054465]Change HMI screens.zip534.[MMS_054466]Convert milliseconds H_M_S.zip535.[MMS_054467]Convert Hours, min, sec to millisec.zip536.[MMS_054468]Periodic timer H-M-S.zip537.[MMS_054469]Cycle Circular.zip538.[MMS_054470]Cycle Linear.zip539.[MMS_054473]Full Voltage Reversing Starter Control.zip540.[MMS_054493]GuardLogix and POINT Guard on DeviceNet.zip541.[MMS_054613]K300 EthernetIP Eternal Reference Program Example.zip542.一个500伺服程序.rar543.一个AB PID控制的例子.rar544.一个DNET的SLC500实例.rar545.一个PLC5实例.rar546.一个RSEmulator5000的测试小程序.rar547.一个RSLOGIX500编的程序.rar548.一个初学者可以看懂的SLC500 程序.rar549.一个自己做的AB的pid模拟程序，供新人学习.rar550.一条自动输送生产线程序(SLC500).rar551.上海飞奥做的天燃器末站PLC系统程序.rar552.两个化工控制的程序.rar553.使用SFC来编写顺控程序.rar554.共享学习PIDE的例程.zip555.哥斯达黎加.rar556.大材小用-抢答器.rar557.天津锦湖轮胎的设备程序.rar558.客车生产脱脂设备程序.rar559.小型压合机.rar560.德国卸船机程序电厂用于码头卸煤.rar561.斗轮机(ABPLC SLC500).rar562.更改注释xiaotiantian.rar563.气压检漏机图纸程序.rar564.水厂程序(1).rar565.水厂程序.rar566.污水厂的处理系统.rar567.滤池器.rar568.电厂化学净水加药系统程序V12.rar569.电厂化学补给水泵房PLC控制系统逻辑程序.rar570.皮带机程序.rar571.示例程序2（船用）.rar572.示例程序（船用）.rar573.美国AB公司PLC5的冲床程序，带注释，经典.rar574.老外电机生产线上的设备程序.rar575.老外的折弯机程序.AB软件编的.有详细注解英文.rar576.老外编的SLC500的PID调节部分程序.rar577.老美 编写的程序供学习.rar578.老美写的料片清洗机程序,RIO用于与机器人和变频器交换信号.rar579.自编四位换档程序（供钻机行业参考）.rar580.计数器程序.rar581.读PLC时间，PLC各状态，远程站状态等的程序v12.6.rar582.这是老外做的一个AB SLC500的程序.zip583.2 pumps one float 90-30 LM90.zip584.Better 2pmps 1 float 90-30 LM90.zip585.Clock Operation.zip586.COMM.rar587.Event drum 90-30 LM90.zip588.GE 90-30 Assembly Machine using Verso Pro.zip589.GE 90-30 Walking Beam Test Machine with Bit Shift.zip590.GE Fanuc 90-70 Boiler Control and Burner Managment.zip591.350可逆式冷轧机.rar592.6头半自动灌装机EV文本与LGPLC实例程序.rar593.LG PLC+HITECH 人机介面用在PCB生产线上的程式（带注释）.rar594.LG 压力机程序.rar595.LG-k系列转速测量.rar596.LG程序.rar597.内圆磨3MZ208.rar598.半自动泡沫成型机LG PLC程序.rar599.南沙镗铣.rar600.发个LG XGB PLC的程式，用於线路板设备.rar601.密胺餐具液压成型机,LG程序,电路图,IO分配,信捷文本屏OP320A全套,.rar602.恒压供水系统.rar603.果冻全自动填充机LG- MT500.rar604.果冻全自动杀毒线.rar605.梳棉机.rar606.注塑加预塑卧式转盘机.rar607.流延膜设备.rar608.液压车床带机械手双拖板.rar609.自动开关门.rar610.韩国产印刷机.rar611.韩国大浩切纸机程序.rar612.1000T铝型材液压机程序.rar613.1000吨注塑机程序 (三菱PLC FX2N).rar614.100定型.rar615.10种单按钮起挺控制程序.rar616.11.rar617.1102刨床控制.rar618.1105PLC与变频器的RS485通信控制.rar619.125吨废纸打包机程序.rar620.12头充填机用于灌装泡泡水.rar621.12层电梯.rar622.12层电梯程序.rar623.12层电梯程序.zip624.140取样锯.rar625.16MR.rar626.16t门机程序.rar627.16个灯流水灯光控制.rar628.2000吨液压机.rar629.20074216432582759.rar630.20个plc样例程序.rar631.2102工业洗衣机程序控制系统.rar632.2104中央空调冷冻泵节能运行控制.rar633.21FR送料器FX.rar634.22层电梯的程序,有输入输出说明.rar635.22层电梯的程序.rar636.22层程序有输入输出说明.rar637.24或32块标准砖程序（变频器）来回摆动.rar638.25个三菱PLC程序.rar639.2楼A后车.rar640.2轴伺服控制（AD75-P2）压焊机 （ 带人机 有注释多点定位控制）.rar641.3M程序.rar642.3层杂物电梯.rar643.3层杂物电梯（带全注释）.rar644.3种单按钮起挺控制程序.rar645.3色平网印花机.rar646.400吨冲床.rar647.400吨压机.rar648.400吨打包机(俄罗斯).rar649.400吨打包机（俄罗斯）.rar650.4Y×16X键盘扫描程序.rar651.4个三菱4DA驱动15个压延电机和序.rar652.4分頻電路.rar653.4台电机启动程序.rar654.4台电机启动程序（自编）.rar655.5111821044626730@灭菌柜plc程序.rar656.5111822485310638@三菱fx2控制货梯程序2.zip657.5111822485318002@三菱fx2控制货梯程序1.zip658.5112323512966280@三菱fx+沈阳蓝光调速器的plc电梯程序.zip659.611250033364376@三菱程序及触摸屏程序实例.rar660.63吨小冲床.rar661.64点发泡机.rar662.66g自动冲床PG14-17改.rar663.6TPH超纯水设备PLC程序.rar664.6_裁切机带伺服.rar665.7-16带网络.rar666.75mm押出机程序.rar667.800t铝材挤压机.rar668.9K抽屉框(XP08104).rar669.9层9站电梯程序.rar670.A&G朔膜裹包机.rar671.A1S68AD.zip672.A2SH(S1) PLC 程序.rar673.A700toFX2N寫入頻率.rar674.ABB用滑台.rar675.ABB用滑台FX程序.rar676.AD,DA模拟量的读入和写出.rar677.ADD加法指令.rar678.Analog Read.zip679.Analog Write.zip680.A系列PLC编程实例(线路板自动叠合拆解线).rar681.Brick Crane v5.zip682.BVDS包装VDS.rar683.CAK6150车床梯形图程序，用的三菱E60系统，带中文注释。.rar684.CC-Link 主从程序.rar685.CCLINK网络通讯.rar686.cnc程序.rar687.Configuring CC-Link.zip688.CRC运算.rar689.Daylight Savings Time 2007 US.zip690.Daylight Savings Time example.zip691.DDM4A四位7段码显示器.rar692.DST for FX.zip693.EF-FST减震.rar694.F-6升降机程序mov.rar695.F900触摸交通监控系统(红绿灯).rar696.Fat Coater b.zip697.FPC 5层自动换架式收板机(PLC+HMI+电气图纸)绝对原版!!.rar698.FR-A700-FX3U 通信程式.rar699.FR-A700-FX3U通信程式.rar700.FX PLC程序 二用一备恒压供水程序及图纸.zip701.FX-VLT通讯程序(Fx2n).rar702.FX0S程序.rar703.fx1n-40mt控制两台伺服程序.rar704.FX1N-485 200718测试正常.rar705.FX1N-60MR-001四柱粉末成型液压机PLC控制系统程序.rar706.FX1NPLC和富士伺服位置控制.rar707.FX1N_5DM.rar708.FX1N与梅物勒-托利多称重仪表（XK3123）通信.rar709.FX1N伺服定位程式(完整注释,JOG,定长,定角度+绝对原创).rar710.fx1n伺服定位程式.rar711.Fx1N喷砂机程序.rar712.FX1N在自动胶带分切机上的应用程序（有注解）.rar713.FX1N拖伺服（焊接）.rar714.FX1S-30MR程序.rar715.FX1S-30MT.rar716.FX1S30家用程序.rar717.FX1S卷纸机程序.rar718.FX1S小程序.rar719.FX1S带2台步进电机.rar720.FX1S电梯扶梯节能改进带注解(非变频节能）.rar721.FX2N 33个程序.rar722.Fx2n 485通讯源程序.rar723.FX2N communicating to 4 Mitsu Drives A500 and E500 series.zip724.FX2N CRC运算.rar725.FX2N CRC運算.rar726.FX2N PLC交通灯程序.rar727.FX2N PLC电梯程序 电梯PLC程序（带注释）.zip728.FX2N PLC电梯程序.rar729.FX2N PLC电梯程序2.rar730.fx2n 与 vfd-b通讯.rar731.FX2N+1PG在机床中的应用实例.rar732.FX2N+1PG在机床中的应用实例（包括整套图纸程序）.rar733.FX2N+20GM（控制要求分析+IO分配+PLC程序+20GM程序+详细注释）.rar734.fx2n-10gm数控定位程序.rar735.FX2N-10PG程序范例（有注解）.rar736.FX2N-1HC程序样例.rar737.FX2N-2AD模拟量程序示例.rar738.fx2n-485bd与６台ｖｆｄ－ｂ的ｒｔｕ通讯程序.rar739.FX2N-4AD-PT程序样例.rar740.fx2n-4ad-tc温控模块编程示意.rar741.FX2N-4AD.rar742.FX2N-INV通讯.rar743.FX2N-INV通讯程序.rar744.fx2n33个程序.rar745.FX2NPLC+2AD+4ADTC+2DA+电阻尺+编码器+PID温控 完整注释程式+UG330人机.rar746.FX2NPLC+2AD+4ADTC+2DA+电阻尺+编码器+PID温控.rar747.FX2NPLC与A700变频器RUT通讯.rar748.fx2nplc与三台丹佛斯变频器458通讯定位.定尺源程序.rar749.FX2NPLC与安川G7变频器通讯(原创）有注释，MEMOBUS的写方式.rar750.FX2NPLC和变频器,F930通讯控制的程序 有注解拉丝机程序.rar751.fx2n与abb变频器通讯程序.rar752.fx2n与s540e变频器485通讯plc程序.rar753.fx2n与三菱变频器通讯及ad、da模块使用样例.rar754.fx2n与台达VFD-B通讯.rar755.FX2N与士林变频器MODBUS通讯（有注解）.rar756.FX2N与森兰SB60+变频的RS485通讯.rar757.fx2n压力控制论程序.rar758.FX2N和1PG完整的小车定位程序.rar759.fx2n国内某知名洗衣机专机程序.rar760.FX2N定位程序.rar761.FX2N扩展程序.rar762.FX2N控制CT驱动器.rar763.FX2N控制步进电机程序.rar764.FX2N控制步进电机程序有注释.rar765.fx2n电梯2层二站实例.rar766.FX2N电梯扶梯节能.rar767.fx2n的pid样例(e文注解）.rar768.FX2N的PID样例.zip769.FX2N的程序.rar770.FX2N简易温度控制.rar771.fx2n纸机传动程序 .rar772.FX2N脉冲布袋收尘控制程序.rar773.fx3u 和E540变频器通讯例子.rar774.FX3u-WT 士林溫控器-MOBUS通訊協定.rar775.FX3U3G PLC通过专用指令与A700F700变频器通讯.rar776.FX3u和E540变频器通讯例子(变频器指令编写).rar777.FXComms.zip778.FXIN CRC效验码计算程序，有注释.rar779.FX与日立SJ300变频通讯，有注解.rar780.FX和EMERSON Modbus通讯案例.rar781.FX和EMERSON通讯案例Fx Modbus test.rar782.Fx定位控制標準程序.rar783.FX编程实例.rar784.FX防洪闸门控制程序.rar785.FX－128生产线程序.rar786.G8 噴槍盤.rar787.GKF离心机.rar788.GP实例+PLC程序.rar789.HID汽车氙气灯二次夹封机.rar790.JH21-150程序.rar791.jq.rar792.LCD设备蚀刻机.rar793.LCD设备蚀刻机程序.rar794.LOW-E玻璃镀膜线程序（三菱QPLC的）一万步带注释.rar795.M1320磨头进出FX1s控制步进电机,有注释.rar796.Medoc sequence generator.zip797.Mitsubishi FX2N PLC with FX2N-ROM-E1.zip798.Mitsubishi Timer Examples (Q02H).zip799.NF电梯程序.rar800.osp1.rar801.osp2 plc.rar802.PCB收板机程式蚀剥铜收.rar803.PCB设备(PTH前处理机).rar804.PCFILM高气压成型机.rar805.Pick and Place.zip806.PID+PLC程序.rar807.pid.rar808.PID[1].FX2N.rar809.PID指令，程序算法，温度、压力模拟量控制，触摸屏。.rar810.PID温度控制.rar811.PID温度试验程序.rar812.PID程序.rar813.PLC 气压程式.rar814.PLCFX0N三层三站程序.rar815.PLC与变频器通讯2.rar816.PLC与气压.rar817.plc与气压控制讲了气阀，气路原理以及用PLC的控制（基础，WORD文档）.rar818.PLC变频伺服电机电485BD通讯fx1n.rar819.PLC台车的呼车控制.rar820.PLC同变频器通讯程序3.rar821.plc实例含答案.rar822.plc实用程序.rar823.plc应用实例.rar824.PLC控制QD75程式.rar825.plc控制司服的送料机.rar826.PLC样例程序（五层）.rar827.PLC监控一台变频器3项.rar828.PLC程序（有兴趣的看看）.rar829.PLC红绿灯(梯形图＋Word文档）.rar830.PLC通讯控制变频器 超级注释.rar831.PLC通过RS485 对FR系列变频的控制.rar832.pp復卷機三菱伺服編程.rar833.Q00CPU与HITECH触摸屏的通讯的示例。.rar834.Q02HCPU新斜裁.rar835.Q06H涂布机程序2W步，领略韩国人写程序风格.rar836.QD75 Demo Program.zip837.QD75运动控制模块例程,带注释.rar838.QJ71C24模块的串口通讯.rar839.Q[1].AD.DA.rar840.Q系列PLC+QD75P伺服标准程序带注释.rar841.Q系列带动伺服程序.rar842.ro1_chun shui.rar843.S2401佑倡油压机.rar844.S7-200之间通讯，有注解.rar845.SA双头倒角机35.rar846.SA外筒总成清洗机30.rar847.SBR废水处理.rar848.SFC编写伺服刀程序.rar849.SFC编程典型案例.rar850.SFC试验程序.rar851.STL forward pause reverse.zip852.String_32bit_Logging_Mitsubishi_cn.zip853.ST反弹限位器焊机.rar854.ST反弹限位器焊机14.rar855.ST注油机.rar856.ST注油机18.rar857.ST活塞杆清洗机.rar858.ST活塞杆清洗机15.rar859.ST首华双枪焊机.rar860.ST首华双枪焊机13.rar861.TEA-9000MDT磷化机.rar862.time.zip863.Timer Examples FX2N.zip864.uv翻板机.rar865.VB与PLC通讯的原理及相关资料.rar866.VB与三菱FX2N 通讯源码.rar867.www[1].qupan.com_3125969_25个三菱PLC程序.rar868.www[1].qupan.com_4341480_弯管机触摸屏+plc程序（全套三菱）带注解.rar869.x20诺安顺包装机改.rar870.x62w万能铣床.rar871.XMTR温控表通讯FX.rar872.XMTR温控通讯.rar873.y28-200油压机.rar874.YF30-315湖州机床厂单柱液压机程序.rar875.YX细伸拉丝机三菱FX PLC程序（有注解）张力控制与传统的指拔开关不一样.rar876.一个3层3站电梯程序，富士VG7变频器。FX2N系列PLC.rar877.一个FX2N的PID程序,超详细注释!.rar878.一个三台发电机两用一备的.rar879.一个三菱程序.rar880.一个三菱ＰＬＣ程序（水胀机）.zip881.一个五层楼的程序.rar882.一个交通灯程序,用FX2N32MT运行通过.rar883.一个完整的五层六门的电梯程序--使用三菱FX2N-84MR.rar884.一个小小的时间程序.rar885.一个小的自动皮带生产线程序.rar886.一个带定位，ＣＣ－ＬＩＮＫ，ＮＥＴ功能的案例英文注解.rar887.一个污水处理plc程序.rar888.一个炉子的控制程序.rar889.一个输送机机械手简单动作.rar890.一个顺序控制，急停保持当前步，复位后继续当前步运行的程序.rar891.一份橡胶硫化机程式,FX2N PLC F90人机.rar892.一台三菱与2台西门子通信.rar893.一台伺服电机控制程序.rar894.一台圆周焊机.rar895.一台湿纸巾机Q程序.附上GOT画面.zip896.一套三菱PLC 海泰克人机 程序.rar897.一段实列程序.rar898.七层以下电梯通用的程序(原创带全注释).rar899.万盼制糖机器.rar900.三万多步马扎克系统三菱梯形图程序英文注释（日本人写）.rar901.三凌恒压供水.rar902.三层三站电梯程序.rar903.三层电梯PLC控制.rar904.三层电梯用编码器控制.rar905.三彩灯循环控制程序.rar906.三次元机械手夹料全程检测报警程序.rar907.三相步进电机控制带注释.rar908.三联200倒丝机FX1N程序初稿脉冲直接输出精确.rar909.三茂拉丝机.rar910.三菱60点IOPLC气动冲床样板程序.rar911.三菱A1SH PLC程序.rar912.三菱ABB通讯完全版.rar913.三菱A系列程序.rar914.三菱CC-LINK配置和变频器通信程序（注释）.rar915.三菱FNX2程序.rar916.三菱FX1N,F930触摸屏实例,带详细注解,和动作说明及接线图.rar917.三菱FX1N可以直接控制数码管显示吗.rar918.三菱FX1S plc控制步进电机实例.rar919.三菱FX1S抢答器.rar920.三菱FX1S抢答器带完整注释.rar921.三菱FX2N CRC效验程序.rar922.三菱FX2N PLC通过485控制爱默生td3000启动停止原程序.rar923.三菱FX2N 系列PLC 与三菱700 系列变频器ModbusRTU 协议通讯应用.rar924.三菱FX2N-PLC控制打印机中文打印程序.rar925.三菱FX2N_IG5通讯_改.rar926.三菱FX2N 螺纹钢生产线的PLC程序。带注解.rar927.三菱FX2N与VFD-B变频器通讯(附注释).rar928.三菱FX2N与VFD-B变频器通讯程序(详细中文注释).rar929.三菱FX2n和宇电AI501仪表通讯.rar930.三菱fx2n振发压机程序.rar931.三菱FX2N烘房生产流程.rar932.三菱FX2N的液压站程序带模拟量输出斜坡上升和斜坡下降的有注解和图纸.rar933.三菱fx2n系列plc与变频器通信实用小程序.rar934.三菱FX2N－plc源程序.zip935.三菱fx2控制货梯程序.zip936.三菱FX_PLC编程口协议2.rar937.三菱FX与变频器16段速控制.rar938.三菱FX系列PLC与三菱变频器通讯应用实例.doc939.三菱fx系列plc与三菱变频器通讯应用实例.rar940.三菱FX系列PLC自由通讯学习.rar941.三菱FX系列全自动二步法吹瓶机.rar942.三菱J3伺服程序加触摸屏.rar943.三菱MOBUD 中文注解程式.zip944.三菱plc+安川伺服焊接机器人.rar945.三菱PLC-1600挤压机主机程序.rar946.三菱PLC FX0S程序.rar947.三菱PLC与LG变频器通讯格式.rar948.三菱PLC与LG变频器通讯程序.rar949.三菱PLC与MD320通讯例子.rar950.三菱PLC与三台变频器通讯实例.rar951.三菱PLC与三菱变频器通讯程序样例.rar952.三菱PLC与变频器通讯(2台).rar953.三菱PLC与变频器通讯的程序范例.rar954.三菱PLC与变频器通讯程序.rar955.三菱PLC与四方变频器通讯.rar956.三菱PLC与数显表通讯.rar957.三菱plc列程.rar958.三菱PLC单按钮正转停止反转停止程序.rar959.三菱PLC和三菱变频器通信.rar960.三菱PLC和台达变频器通讯.rar961.三菱PLC实用程序.rar962.三菱PLC恒压供水带注译恒压供水.rar963.三菱PLC控制四层自动电梯程序(有注解).rar964.三菱PLC控制步进定长切断.rar965.三菱plc控制步进电机 程序实例.rar966.三菱PLC控制燃油锅炉的程序.rar967.三菱PLC模拟量输出控制12台变频器实现的纸机传动控制系统.rar968.三菱PLC比较指令的应用 计数器自动复位.rar969.三菱PLC的NN网络通信.rar970.三菱PLC的一个实例程序.zip971.三菱PLC螺纹钢飞剪控制系统的程序--by---daxin365.rar972.三菱PLC锁机程序.rar973.三菱Q MOTION 程式样例.rar974.三菱Q02H系列的纯水控制.rar975.三菱Q02H系列的纯水控制程序.rar976.三菱qd75定位模块程序.rar977.三菱QPLC与OMRON的E5CN温控表的通讯程序，用CompowayF通讯协议.rar978.三菱Q系列带伺服的磨床程序.rar979.三菱q系列條碼讀取解碼程序.rar980.三菱Q系列的程序高温炉程序，有网络模块 注释是繁体.rar981.三菱Q系列的程序高温炉程序，有网络模块 注释是繁体.zip982.三菱SGVFA货梯程序.rar983.三菱SGVP货梯程序.zip984.三菱___(内有程序说明).rar985.三菱与台达ASCII通信.rar986.三菱与西门子自由口通信.rar987.三菱两台PLC通信.rar988.三菱伺服样例程序尿片包装机菱运动控制器软件MT DEVELOPER.rar989.三菱例子.rar990.三菱典型程序4Y×16X键盘扫描程序.rar991.三菱剪机.rar992.三菱变频器通讯(2台).rar993.三菱和MODBUS 以及其它设备通讯工程实例，GXV7以上打开.zip994.三菱多段速度控制.rar995.三菱循环控制程序.rar996.三菱数控机床PLC程序.rar997.三菱数控机床PLC程序，在用 有注解.zip998.三菱机车.rar999.三菱板坯输送程序.rar1000.三菱温度控制PID加热器程序.rar1001.三菱温度模块程序.rar1002.三菱电梯SG-VF程序.rar1003.三菱电梯程序.rar1004.三菱的24层站 带参数.rar1005.三菱的50个程序例子1.rar1006.三菱的50个程序例子2.rar1007.三菱的FX1S与三菱的FR-E540变频器通过485接口的通讯程序.rar1008.三菱的布袋除尘器程序.rar1009.三菱的油炉图纸（梯形图）.rar1010.三菱程序 加油机（有注解）.rar1011.三菱程序及触摸屏程序实例纯水工程FX gppw.rar1012.三菱程序及触摸屏程序实例纯水工程gppw.rar1013.三菱程序实例－锅炉吹灰器 循环流化床锅炉的10组共40个吹灰器程序.zip1014.三菱程序实例－锅炉燃烧器 循环流化床锅炉的三部启动燃烧器，四部辅助燃烧器程序.zip1015.三菱程序带注解。.rar1016.三菱编程10S定时例子.rar1017.三菱编程3运输带例子.rar1018.三菱编程D8099例子.rar1019.三菱编程RS剪板机例子.rar1020.三菱编程RS通讯例子.rar1021.三菱编程实例.rar1022.三菱编程温控通讯例子.rar1023.三菱薄膜复合机程序，用了6个特殊模块.rar1024.上板机.rar1025.上海光明三得利啤酒灌装机图纸和程序（三菱）.rar1026.上海天马安川机器人液晶搬用运PLC程序.rar1027.上造型线 2007，11，6小日本程序.rar1028.下是自己写的QD75程式现场使用过OK.rar1029.不完善的印刷机程序.rar1030.与其它设备的MODBUS通讯实例.zip1031.丝印机plc程序.rar1032.丝网印刷机PLC程序.rar1033.两台电梯程序28层27层.rar1034.两种简单的彩灯闪烁程序.rar1035.两线控制机械手.rar1036.两轴伺服控制的PCB自动切边(PLC+ 人机界面)程式.rar1037.两道FX2N-4AD习题(有程序).rar1038.严格的双手操作FX2N.rar1039.中央吸尘机.rar1040.中断数据移位以及脉冲捕捉功能程序实例.rar1041.中水处理程序.rar1042.丹佛斯VT2800与FX2N用RS485通讯示例.rar1043.丹佛斯变频器与FX通讯实例（适用于所有丹佛斯变频器）.rar1044.九层九站电梯.rar1045.九层九站电梯程序(带注解)FX2N.rar1046.九层九站电梯程序(带详细注解).rar1047.二分频梯形图.rar1048.二层二站电梯程序.rar1049.二极管引线排列机.rar1050.二极管设备引线排列机.rar1051.二用一备恒压供水程序及图纸.rar1052.于FX系列PLC连接条形码阅读器应用实例.rar1053.五台电机启停（用基本指令写）.rar1054.五工位移载送板机(砖机全自动生产线用).rar1055.五工位组合机PLC程序，有详细注释（原创）.rar1056.五相步进.rar1057.五组抢答器.rar1058.亚智收板机.rar1059.交通灯.rar1060.交通灯2.rar1061.交通灯控制.rar1062.交通红绿灯.rar1063.产品正次品分选.rar1064.从日本进口回的大型设备PLC程序.rar1065.仿制意大利机械的一个程序.rar1066.伺服例程，用FX1N连接1PG控制MR-J2S-10A.rar1067.伺服定位子程序带接线图（M2J2S.1PG）[详细注释].rar1068.伺服控制的送料机.rar1069.佛山200T液压机.rar1070.作业-交通灯.rar1071.佳信达克尔布斯胶订机.rar1072.使用台達觸摸屏對應FX3U主機測試1PG脈波輸出.rar1073.使用说明.txt1074.供学习的一个12层电梯程序，三菱FX2N－plc.rar1075.供水.rar1076.便當選擇器.rar1077.光标切.rar1078.克尔布斯胶订机.rar1079.全自动二步法拉吹吹瓶机带机械手.rar1080.全自动八缸双拖板车床.rar1081.全自动泡塑成型机三菱程序.rar1082.全自动裁剪机2_.rar1083.全自动转盘式三工位熔接机.rar1084.八层以下货梯通用程序(奥菱达).rar1085.八点间歇时间控制.rar1086.八路抢答器.rar1087.八路抢答器fx1s-plc设计.rar1088.公开课讲义举例顺序控制程序.rar1089.公路局的混凝土称重等全自动西门子PLC程序.rar1090.六头直径式拉丝机.rar1091.六层六站电梯.rar1092.关于FX系列PLC连接条形码阅读器应用实例.rar1093.冰箱冷凝器自动弯管机.rar1094.冰箱和冷柜生产行业门体发泡线体的程序.rar1095.冲床控制程序 三菱FX1N PLC 附注释.rar1096.冷却水泵节能循环运行1.rar1097.冷却水泵节能循环运行2.rar1098.冷室压铸机FX PLC程序.zip1099.几个PLC与变频器通讯的程序.rar1100.几个三菱FX与FR变频器通信事例的程序.rar1101.凸轮控制程序.zip1102.分纸机程序.rar1103.切割机.rar1104.创宝快速机.rar1105.制冷控制系统梯形图（日本人编的，有英文注释，三菱FX2N-128MR-001).rar1106.制冷控制系统（日本人编的，有英文注释，三菱FX2N-128MR) 6#PLC.rar1107.制动器试验的程序.rar1108.制动液加注机.rar1109.制盖机FX2N与西门子变频器通信程式（中文注释).rar1110.刷焊道机.rar1111.剃齿机.rar1112.前处理2放板机.rar1113.前处理装置.rar1114.力恒锌合金压铸机.rar1115.加油机.rar1116.包装机.rar1117.包装机三菱PLC程序.zip1118.化纤打包机.rar1119.北京现代发动机传送线有自动仓库.rar1120.十字定位打孔机程序（FX1S-20MR ）.rar1121.十字路交通信号灯.rar1122.十字路通灯控制程序，FX1S.rar1123.升降平台程序.rar1124.升降机.rar1125.升降横移立体停车库.rar1126.升降横移车库PSH2-5D.rar1127.升降速程序.rar1128.半自动丝网印刷机.rar1129.协易高精密冲床部份程序.rar1130.单印刷头程序用到PLC控制两个伺服电机含注解.rar1131.单按钮五台电机启停控制SFC程序.rar1132.单按钮控制电机.rar1133.单按钮控制电机正反停，本程序未加上正反转切换时的延时，单按钮表示多种状态容易误动，并不建议在实际当中使用,利用者后果自负.rar1134.单按钮正反停.rar1135.单按钮起停梯形图.rar1136.单按钮起停比较常用型.rar1137.单片机矩阵显示程序.rar1138.单色彩印机.rar1139.单输入三态输出-已调试.rar1140.单输入三态输出.rar1141.单钮正反停.rar1142.单钮起停控制程序三例.rar1143.卧式裁断机.rar1144.卫生巾小包机.rar1145.卫生巾机，涂布机等涂胶高速补偿控制程序（正在用）.rar1146.卫生巾设备.rar1147.卫生巾设备三菱PLC程序外加HMI触屏程序QCPU有注解.zip1148.卫生级灭菌柜三菱PLC程序及人机GP程序.rar1149.印刷机plc程序拖动2台步进.rar1150.印刷机plc程序拖动2台步进电机.rar1151.印刷机械分切机程序.rar1152.印刷机步进马达PLC做同步控制.rar1153.印刷机水路跟踪控制程序.rar1154.印刷机程序.rar1155.印刷自动装订机.rar1156.印染厂皂洗机.rar1157.印染行业定型机.rar1158.印染行业的定型机.rar1159.印花机.rar1160.印花机FX-2N.zip1161.卷筒包装机控制程序.rar1162.压入机.rar1163.压机.rar1164.压机程序.rar1165.压花机3.rar1166.压铸机.rar1167.压铸机周边程序.rar1168.友信自动装箱机程序.rar1169.双CPU的程序（Q02HCPU,Q172CPUN带四个伺服器）.rar1170.双伺服攻牙机实例.rar1171.双头测漏机.rar1172.双工机械手.rar1173.双枪环焊弹簧盘（07-01）.rar1174.双端面FX1N改进程序.rar1175.双端面磨床.rar1176.双缸双工位纸浆模塑成型机三菱PLC程序.rar1177.双贴机.rar1178.双贴机用到中断与斜坡指令，一个PLC带两伺服.rar1179.发一个A系列PLC程序(日本机器程序).rar1180.发个数控程序包括GP.NC.三菱2.rar1181.发个电梯并联程序；三菱的24层站 带参数有井道自学习功能含参数.rar1182.变频器16段速控制.rar1183.变频器一拖三原理图.rar1184.变频恒压供水一拖二.rar1185.只能出一电路.rar1186.可乐装箱机程序_fx2n的有注释.rar1187.可改变闪光灯.rar1188.可编程控制器应用101例.pdf1189.可逆带能耗制动控制.rar1190.台湾冷水空调机组程序（三菱FX2N-64MR).rar1191.台湾凇协ＳＭＴ周遍设备送板机.rar1192.台湾原装细伸拉丝机FX PLC程序（有详细注解）.rar1193.台湾热室压铸机程式（FX2N）.rar1194.台湾立叶高速冲床.rar1195.台湾立叶高速冲床程序和变频器、触摸屏通信.rar1196.台湾自动仓储程序.rar1197.台湾边封机三菱PLC加EVIEW.rar1198.台车fx plc程序.rar1199.台车呼车控制.rar1200.台车式涂装线.rar1201.合意钢化玻璃厂玻璃切割程序（带注释）.rar1202.合益干燥工段.rar1203.合肥锻压机床总厂产YH32 1000 10000千牛四柱液压机程序.rar1204.吉林大发安川机器人玻璃涂胶程序.rar1205.同步输送带程序(新).rar1206.同温度控制模块通讯实例.rar1207.吹瓶机程序FX2N-64MR有注解.rar1208.哈滚牙机三菱FX2NPLC+步进电机+三菱触摸屏.rar1209.商标打印机.rar1210.啤酒灌装机图纸和程序-三菱PLC程序.zip1211.啤酒灌装机图纸和程序-电气图纸.zip1212.啤酒输送无压力系统三菱程序.rar1213.喷泉控制设计.rar1214.喷涂.rar1215.喷涂生产线粉末喷涂控制程序.rar1216.喷灌控制器.rar1217.四层电梯.rar1218.四层菜梯程序.rar1219.四工位小车的改进.rar1220.四柱液压机.rar1221.四柱液压机程序.rar1222.四槽机械手伺服电机小程序.rar1223.四色圆盘移印机三菱程序，五台PLC通信，八轴同时驱动.rar1224.回转炉.rar1225.国产自动焊程序（三菱）.rar1226.国内某知名洗衣机专机程序.rar1227.圣诞来了，发个顺序控制，可以进行步数显示的程序。.rar1228.地板转程序.rar1229.均一性测试机.rar1230.坡口铣床程序.zip1231.塑胶机-FX2N MT.rar1232.塑膜裹包机图与PLC程序 +HMI.rar1233.墨西哥纬创二期工程.rar1234.声控门程序.rar1235.复合板机程序图.rar1236.多层面实用程序.rar1237.多段速控制伺服电机！凸度超精机用.rar1238.大厦空调技改.rar1239.大型精密焊接设备PLC程序.rar1240.大小顺序排列设计.rar1241.天丞线路板噴砂機.rar1242.天塔之光.rar1243.天津隆达冷却线FX2N与日历变频器带注释.rar1244.太阳能.rar1245.太阳能演示程序1.rar1246.奥菱达8层货梯.rar1247.子午胎0--90°斜裁程序.rar1248.学习必读.txt1249.定型机超喂.rar1250.定时关闭所有的输出点定时停机365按x0复位.rar1251.定时程序，程序带注解！！.rar1252.定長度裁端子机程序.rar1253.定长切断2伺服编程.rar1254.宜宾（丝丽雅）PLC程序.rar1255.宝钢电梯程序带注释.rar1256.实例.rar1257.实用8t自动精密冲床fxplc程序.rar1258.实用8T自动精密冲床三凌FXPLC程序 绝对不是案例.rar1259.实用三菱PLC和变频器通讯实例（内有详细注解）.rar1260.实用学习PLC程序.rar1261.实用程序.rar1262.客车公司车顶自动焊接FX PLC程序千多条指令.rar1263.客车公司车顶自动焊接PLC程序.rar1264.家用程控.rar1265.宾馆原程序.rar1266.密码锁门梯形图.rar1267.富士康的自动生产线.rar1268.对辊机.rar1269.封切袋机.rar1270.封口机.rar1271.封口液压.rar1272.封尾机.rar1273.小型水电站.rar1274.小日本的程序.rar1275.小水电站.rar1276.小车定位计数程序.zip1277.尿片包装机.rar1278.层绕机.rar1279.工业前处理装置.rar1280.常规制动器300万次实验台程序.rar1281.干燥设备.rar1282.平板硫化机FX2N-PLC加 F940人机.rar1283.平网印花机单元控制程序.rar1284.广东1000T自动压砖机原程序三凌.rar1285.广东
上传时间： 2013-07-13
上传用户：eeworm
本课题对DQPSK调制解调技术的FPGA实现进行了比较全面的研究，利用DQPSK调制技术实现了码速200Kbps的调制器。调制载频3.2MHz、带宽180KHz、带外抑制大于45dB，调制器设计达到预定要求。解调器硬件完成，软件未全部实现，但完成了CIC滤波器、载波跟踪环、位定时同步、并串转换等几个关键模块的设计。对解调器做了实验测试，验证了相关模块设计的正确性，解调器中重要的载波同步功能已能实现。 在本文中，主要介绍了DQPSK调制解调技术的FPGA实现。着重对差分编解码、成形滤波器、Costas载波跟踪环以及CIC滤波器进行了详细叙述，对硬件设计则做了简要的说明，给出了主要电路图和实物图。 在重要设计环节上，文中进行了比较细致的Matlab仿真及System View仿真，并给出了相关分析与说明。最后，采用VHDL 硬件描述语言对系统进行了设计与实现。文中对位定时同步以及CIC滤波器的可变速设计做了创新与改进。
上传时间： 2013-05-22
上传用户：michael52
LTC2400是凌特公司生产的一种微功耗、高精度24位A/D转换器,该芯片内部集成有振荡器,工作电压 2.7-5.5V,积分线性误差为4ppm,RMS噪声为0.3ppm,供电电流仅为200A,
上传时间： 2013-07-07
上传用户：dgann
TLC2543是TI公司的12位串行模数转换器，使用开关电容逐次逼近技术完成A/D转换过程。由于是串行输入结构，能够节省51系列单片机I/O资源；且价格适中，分辨率较高，因此在仪器仪表中有较为广泛的应用。 TLC2543的特点 （1）12位分辩率A/D转换器； （2）在工作温度范围内10μs转换时间； （3）11个模拟输入通道； （4）3路内置自测试方式； （5）采样率为66kbps； （6）线性误差±1LSBmax； （7）有转换结束输出EOC； （8）具有单、双极性输出； （9）可编程的MSB或LSB前导； （10）可编程输出数据长度。 TLC2543的引脚排列及说明 TLC2543有两种封装形式：DB、DW或N封装以及FN封装，这两种封装的引脚排列如图1，引脚说明见表1 TLC2543电路图和程序欣赏 #include<reg52.h> #include<intrins.h> #define uchar unsigned char #define uint unsigned int sbit clock=P1^0; sbit d_in=P1^1; sbit d_out=P1^2; sbit _cs=P1^3; uchar a1,b1,c1,d1; float sum,sum1; double sum_final1; double sum_final; uchar duan[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; uchar wei[]={0xf7,0xfb,0xfd,0xfe}; void delay(unsigned char b) //50us { unsigned char a; for(;b>0;b--) for(a=22;a>0;a--); } void display(uchar a,uchar b,uchar c,uchar d) { P0=duan[a]|0x80; P2=wei[0]; delay(5); P2=0xff; P0=duan[b]; P2=wei[1]; delay(5); P2=0xff; P0=duan[c]; P2=wei[2]; delay(5); P2=0xff; P0=duan[d]; P2=wei[3]; delay(5); P2=0xff; } uint read(uchar port) { uchar i,al=0,ah=0; unsigned long ad; clock=0; _cs=0; port<<=4; for(i=0;i<4;i++) { d_in=port&0x80; clock=1; clock=0; port<<=1; } d_in=0; for(i=0;i<8;i++) { clock=1; clock=0; } _cs=1; delay(5); _cs=0; for(i=0;i<4;i++) { clock=1; ah<<=1; if(d_out)ah|=0x01; clock=0; } for(i=0;i<8;i++) { clock=1; al<<=1; if(d_out) al|=0x01; clock=0; } _cs=1; ad=(uint)ah; ad<<=8; ad|=al; return(ad); } void main() { uchar j; sum=0;sum1=0; sum_final=0; sum_final1=0; while(1) { for(j=0;j<128;j++) { sum1+=read(1); display(a1,b1,c1,d1); } sum=sum1/128; sum1=0; sum_final1=(sum/4095)*5; sum_final=sum_final1*1000; a1=(int)sum_final/1000; b1=(int)sum_final%1000/100; c1=(int)sum_final%1000%100/10; d1=(int)sum_final%10; display(a1,b1,c1,d1); } }
上传时间： 2013-11-19
上传用户：shen1230
