虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

模数<b>转换芯</b>片

  • 模数转换资料

    还行吧

    标签: 模数转换

    上传时间: 2013-11-24

    上传用户:gaoliangncepu

  • 基于89C52的二极管特性测试器的设计

      利用单片机具有的智能程序控制的特点,设计了基于STC89C52单片机的"二极管特性测试器",可对二极管一般特性进行快速测试。通过稳定线性电流源给二极管加载恒定电流,然后由高精度模数转换器测试其压降,以此为基础可判断二极管好坏、检测二极管极性和测试二极管伏安特性等,避免了用万用表测试只能测得极性而不知其特性这一缺点。可用于电子设计制作过程中对二极管进行快速测试,以确定被测二极管是否满足电路的设计要求。   Abstract:   By making good use of the intelligent control function of the Micro Controller Unit (MCU), the diode trait tester was designed based on the STC89C52,which could be used to test the trait of a diode rapidly. By loading constant current to diode through the stable linear current source, and measuring the voltage drop of the diode by high-precision analogue-to-digital converter (ADC), it can judge whether the diode is good or not, distinguish the polarity of the diode, and test the trait that the diode, which can avoid the fault of using a multimeter can only measure the polarity but not the trait. This device can be used to test the trait of a diode quickly,and to make sure that whether a diode can be used in the electronic design or not.

    标签: 89C52 二极管 特性测试器

    上传时间: 2013-11-13

    上传用户:assef

  • 基于C8051F020单片机的多路压力测量仪

    介绍了一种基于C8051F020单片机的多路压力测量仪。该测量仪选用电阻应变式压力传感器采集压力信号,并经放大电路处理后送入C8051F020单片机,再由C8051F020单片机内部的A/D转换器将采集到的压力信号进行模数转化,然后分别对数据进行存储和显示。该测量仪能测量6路压力信号,并且各测量点都能单独检测和设置。由于采用了C8051F020单片机,简化了硬件电路,增强了抗干扰能力,使得测量仪具有测量精度高,冲击小等特点。 Abstract:  A measurement apparatus for multi-channel pressure based on single chip microcomputer is introduced.It can measure 6 channels signal of the pressure,and the pressure measure points can be detection and located individually.The pressure signal sampling is obtained by resistor stress-type pressure sensors,the digital signals of 6 channels are collected through amplifying and adjustment circuit of pressure signals and internal integrated A/D converter of MCU.Finally,and it realizes the function to store and display data separately.C8051F020 was used to made hardware circuit simple,and it also enhanced the anti-interference ability.It features high precision and little impact.

    标签: C8051F020 单片机 多路 压力

    上传时间: 2013-11-16

    上传用户:yare

  • HT46R47,HT46R22,HT46R23,HT46R2

    前言 自从盛群半导体公司成立以来,即致力于单片机产品的设计与开发。虽然盛群半导体提供给客户各式各样的半导体器件,但其中单片机仍是盛群的主要关键产品,未来盛群半导体仍将继续扩展单片机产品系列完整性与功能性。通过长期累积的单片机研发经验与技术,盛群半导体能为各式各样的应用范围开发出高性能且低价位的单片机芯片。许多连接到外部感应器的重要应用需要处理模拟信号,所有的这些应用,在它们可以被单片机处理之前需要通过一个A/D转换器做模数信号的转换。为了满足这些需求,盛群开发出A/D系列的单片机,除了拥有I/O系列的所有特性和功能外,还含有集成的多通道A/D转换器,它的解析度和通道个数可调。而PWM功能和I2C接口,则进一步增加了A/D系列单片机的功能和应用的可行性。

    标签: 46R HT 46 R47

    上传时间: 2013-12-05

    上传用户:waitingfy

  • 用AT89C52和TLC1543实现数据采集系统

    TLC1543是TI公司推出的采用SPI技术的模数转换器。具有输入通道多、高速、高分辨率、性价比高、易于和单片机接口等特点,在各种数据采集系统中有着广阔的应用空间。51单片机、TLC1543加上很少的外围器件即可构成一个高性价比的数据采集系统,同时TLC1543占用单片机I/O资源较少,使得单片机有足够的I/O资源去完成如控制、显示等功能。由AT89C52和TLC1543构成的三相单独可调400Hz中频电源的数据采集系统在实际运用中达到很好的效果。

    标签: 1543 89C C52 TLC

    上传时间: 2013-11-17

    上传用户:xg262122

  • 基于STC12C5408AD的记忆示波器

    主要介绍构成记忆示波器的STC12C5408AD增强型单片机8通道10位模数转换功能的设置、应用和具体的汇编程序设计,以及PC机串行通讯和图形显示的高速汇编程序的设计要点,并列举实例说明其应用效果。 Abstract:  The configuration, applications and the designs for? compiling program of the memorial oscillograph of 10 bits A/D conversation are introduced. It’s bases on STC12C5408AD 8? channels? single-chip? computer? in? enhancement? mode. It also recommends the devising essentials of high speed compiling program for PC serial communication and graphics display, lists examples to explain its effects in using.

    标签: C5408 5408 STC 12C

    上传时间: 2013-10-10

    上传用户:adada

  • TLC1549串口传输与单片机的AD设计

    详细介绍了TLC1549系列模数转换器的特点及工作原理,然后根据TLC1549的工作时序和A/D转换原理针对实际问题编写了详细的汇编语言程序。 Abstract:  A basic principle and characteristic of TLC1549 analog-to-digital converter are introduced? detailedly in this article.Through engineering-oriented illustration,a microcomputer programmer base on basic principle and time sequence of TLC1549 is writted.

    标签: 1549 TLC 串口 传输

    上传时间: 2014-07-16

    上传用户:blans

  • TLC2543在89C51单片机数据采集系统中的应用

    介绍了单片机数据采集系统的硬件原理和软件设计。该系统以89C51 单片机为核心,以12 位TLC2543 为串行模数转换器,由MC14489 构成采集数据实时显示系统,带有RS2232 通信接口,系统具有易实现、易编程、可移植、体积小、功耗低等优点,具有良好的推广与应用价值。

    标签: 89C51 2543 TLC 单片机

    上传时间: 2013-10-18

    上传用户:熊少锋

  • 基于AT89C51单片机的高精度测温系统的研制

    摘要:对特殊的环境温度进行测量.不仅要求测量的实时性.而且要求测量的精确度.使测量的温度达到既定的标准。因此作者介绍了一种应用铂电阻进行高精度的温度测量系统.系统中以PT100铂电阻作为测温传感器.采用最小二乘法来消除测温系统的非线性.并应用24位高性能模数转换器AD7714对所输入的模拟信号进行模/数转换。AD转换器AD7714的应用保证了0.001摄氏度的测量分辨率.最小二乘法的非线性优化使系统的测量误差小于0.01%。关键词:温度测量 AD7714 AT89C51 单片机 非线性优化 最小二乘法 铂电阻

    标签: 89C C51 AT 89

    上传时间: 2013-11-20

    上传用户:dongbaobao

  • 使用单片机制作多路输入电压表

    在工业控制和智能化仪表中,常由单片机进行实时控制及实时数据处理。单片机所加工的信息都是数字量,而被控制或测量对象的有关参量往往是连续变化的模拟量,如温度、速度、压力等等,与此对应的电信号是模拟电信号。单片机要处理这种信号,首先必须将模拟量转换成数字量,这一转换过程就是模—数转换,实现模/数转换的设备称为 A/D 转换器或ADC。 AD 转换器是单片机应用中常见的接口,从事单片机开发的人员通常都会遇到使用 AD的要求,本文通过一个典型的例子来学习一种常用 AD转换器的用法。

    标签: 用单片机 多路 输入 电压表

    上传时间: 2013-10-18

    上传用户:yueguizhilin