selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0,

资 源 简 介

selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0, termi- either unipolar or bipolar input range. A write pulse (WR nates acquisition and starts conversion on WR°Os risin + CS) can either start an acquisition interval or initiate a edge (Figure 6). However, if the second control byte combined acquisition plus conversion. The sampling contains ACQMOD = 1, an indefinite acquisition interval interval occurs at the end of the acquisition interval. is restarted. The ACQMOD bit in the input control byte offer

您 可 能 感 兴 趣 的

• selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0,
• selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0,
• selects the mux channel and configures the MAX197 for second write pulse, written with ACQMOD = 0,
• This is an example program showing how to use the LMX2326 chip. The program configures the chip a
• This program configures the external memory interface and CAN to receieve data in a FIFO buffer and
• computes the shortening-signal-to-noise ratio in dB,tail energy in dB and the effective channel imp
• Comparison of the performances of the LS and the MMSE channel estimators for a 64 sub carrier OFDM
• This program shows the distributions of the co-channel interference in forward and reverse link in t
• Simulating the SUI Channel Models
• compute the mimo channel capacity and plot the result.